Hi Dorian
I did as you wrote below, but ...
$ sudo -i
Password:
# cd /usr/ports/lang/python/2.5/
# export FLAVOR=no_x11
# make install
Fatal: no flavors for this port. (in lang/python/2.5)
*** Error code 1
Stop.
#
:-(
--
TIA
Paolo
On Sat, Feb 6, 2010 at 9:39 PM, Dorian B|ttner wrote:
>
Hi Paolo,
as Matthias already pointed out, python doesn't have a no_x11 Flavor. I
had the ruby thing in mind while typing, it ends up similar.
Sorry again for the confusion.
Dorian
Paolo Supino schrieb:
Hi Dorian
I did as you wrote below, but ...
$ sudo -i
Password:
# cd /usr/ports/lang
Hello,
I am going to replace the rule
rdr pass on $ext_if proto tcp from any to any port 1024:65535 -> 10.0.1.32
port 1024:*
by a general rule for redirecting to all the machines that have a ip
starting by 10.0.1
Is this even possible ? A rule like
rdr pass on $ext_if proto tcp from any to any po
On Sun, Feb 07, 2010 at 12:24:52PM +0100, Jean-Fran?ois SIMON wrote:
> Hello,
>
> I am going to replace the rule
> rdr pass on $ext_if proto tcp from any to any port 1024:65535 -> 10.0.1.32
> port 1024:*
> by a general rule for redirecting to all the machines that have a ip
> starting by 10.0.1
>
"Bret S. Lambert" writes:
> No, you'd have to so a seperate rdr line for each backend host.
The other way to do it would make a list or table with the actual
addresses, then do the rdr with round-robin or random, possibly
sticky-address if it's important that connections go to the same
machine.
2010/2/7 Bret S. Lambert
> On Sun, Feb 07, 2010 at 12:24:52PM +0100, Jean-Fran?ois SIMON wrote:
> > Hello,
> >
> > I am going to replace the rule
> > rdr pass on $ext_if proto tcp from any to any port 1024:65535 ->
> 10.0.1.32
> > port 1024:*
> > by a general rule for redirecting to all the machi
On Sun, Feb 07, 2010 at 03:09:44PM +0100, Jean-Fran?ois SIMON wrote:
> 2010/2/7 Bret S. Lambert
>
> > On Sun, Feb 07, 2010 at 12:24:52PM +0100, Jean-Fran?ois SIMON wrote:
> > > Hello,
> > >
> > > I am going to replace the rule
> > > rdr pass on $ext_if proto tcp from any to any port 1024:65535 ->
On Sun, Feb 07, 2010 at 03:09:44PM +0100, Jean-Fran?ois SIMON wrote:
> 2010/2/7 Bret S. Lambert
>
> > On Sun, Feb 07, 2010 at 12:24:52PM +0100, Jean-Fran?ois SIMON wrote:
> > > Hello,
> > >
> > > I am going to replace the rule
> > > rdr pass on $ext_if proto tcp from any to any port 1024:65535 ->
Hello,
Since sometime, I need to add default route as "route add default 192.168.1.1"
in order to be able to reach internet, otherwise I have ("no route to host").
I would like to automate this in a proper way as it should be.
Regards
Le vendredi 05 fivrier 2010 17:51:05, Calomel Org a icrit :
> You can use apm. It will only save a few watts, but it may reduce the
> cooling costs by reducing the heat generated by the CPU. If you have
> _many_ machines you can easily reduce the temperature of the server room
> by a few degrees C.
"Jean-Francois" writes:
> Since sometime, I need to add default route as "route add default
> 192.168.1.1"
> in order to be able to reach internet, otherwise I have ("no route to host").
>
> I would like to automate this in a proper way as it should be.
sounds like you could be missing /etc/my
On Sun, Feb 07, 2010 at 06:29:27PM +0100, Jean-Francois wrote:
> Hello,
>
> Since sometime, I need to add default route as "route add default
> 192.168.1.1"
> in order to be able to reach internet, otherwise I have ("no route to host").
>
> I would like to automate this in a proper way as it sh
On Sun, 7 Feb 2010 18:29:27 +0100
"Jean-Francois" wrote:
> Hello,
>
> Since sometime, I need to add default route as "route add default
> 192.168.1.1" in order to be able to reach internet, otherwise I have
> ("no route to host").
>
> I would like to automate this in a proper way as it should b
On 7 Feb 2010, at 17:50, Bret S. Lambert wrote:
> On Sun, Feb 07, 2010 at 06:29:27PM +0100, Jean-Francois wrote:
>> Hello,
>>
>> Since sometime, I need to add default route as "route add default
192.168.1.1"
>> in order to be able to reach internet, otherwise I have ("no route to
host").
>>
>> I w
On Sun, 7 Feb 2010 18:44:13 +0100
"Jean-Francois" wrote:
> Is there something one can do to make the system fall into sleep in
> OpenBSD ?
Suspending has worked for some time on OpenBSD. Have a look at: zzz
But you might want to do your homework about the wakeing up part.
hmm, on Sun, Feb 07, 2010 at 07:10:29PM +0100, Robert said that
> On Sun, 7 Feb 2010 18:44:13 +0100
> "Jean-Francois" wrote:
>
> > Is there something one can do to make the system fall into sleep in
> > OpenBSD ?
>
> Suspending has worked for some time on OpenBSD. Have a look at: zzz
> But you m
As far as I can see, any modern processor supports several states C0, C1, ...
Is there any way to take advantage of this into OpenBSD in order to reduce the
system consumption by falling the CPU in C1 state or higher ?
Regards
> This should have been automatically configured when you did the initial
> installation. What did you skip in there?
>
> G.
Noticed. I think I tried too many various things with ifconfig or whatever
network configuration files.
In the end, I must have done something that I basically did not u
On Saturday, February 6, 2010, Chris Bennett
wrote:
...
> make a .forward file with the user or email address to forward to.
> note the dot in front.
> Please note, this can only be one address and root will not get a copy
The forward(5) manpage explicitly states that multiple addresses are
permi
>> Note: When running with the lowest multiplier, HDD I/O performance may
>> suffer. In my case the lowest CPU rate is at 1000MHz and with full I/O
>> load accross 1 or 2 HDDs the CPU load is below the treshold of the apm
-C,
>> so it doesn't speed up. If I switch it manually with apm -H the tr
> The disk I/O + samba doesn't stress the CPU enough so it does not speed up.
> Which is good :) I expect my disk I/O to keep CPU usage low, that's why we
> have all that DMA, I/O controllers and stuff.
>
> Bad thing is, with the lowest CPU multiplier, something else is slowed
> down. Maybe the c
On Sat, Feb 06, 2010 at 09:48:03PM +0100, Gergely Fazekas wrote:
> Hello,
>
> I'm looking for help with setting up my laptop with OpenBSD. I'm pretty new
> to *BSD, so please, bear with me, as I'm eager and capable to learn. :-)
>
> What I'd like to achieve: dual boot with Windows XP, with the fo
This article is about some add-ons that are not safe.
Shockingly, :) they got by Mozilla's eyes
http://blogs.zdnet.com/security/?p=5408&tag=content;col1
I might not post this, except I suspect that there are other add-ons
that are not secure.
I recently had Firefox 3.5 open web pages "magical
On 8 February 2010 00:45, Chris Bennett wrote:
> This article is about some add-ons that are not safe.
> Shockingly, :) they got by Mozilla's eyes
>
> http://blogs.zdnet.com/security/?p=5408&tag=content;col1
>
> I might not post this, except I suspect that there are other add-ons that
> are not se
ropers wrote:
On 8 February 2010 00:45, Chris Bennett wrote:
This article is about some add-ons that are not safe.
Shockingly, :) they got by Mozilla's eyes
http://blogs.zdnet.com/security/?p=5408&tag=content;col1
I might not post this, except I suspect that there are other add-ons that
ar
Hello, Can the Operating system be ported to AMD64? We need the safest
operating system in the world for our AMD64 Tyan Work Stations. Hopefully
you will make an installer for us. Your talent is world renowned, I can only
run your system live for now in i386, it is the best. Do you need money
donat
On Sun, 7 Feb 2010, Chris Bennett wrote:
> I might not post this, except I suspect that there are other add-ons
> that are not secure.
>
> I recently had Firefox 3.5 open web pages "magically"
>
I had a similarproblem - FF opening sites 'magically'! In my case, it was
a plugin that automatically d
You (or anyone else, really) wouldn't happen to have any 1st or 2nd
generation PC stuff (as in, IBM 5150 PC / IBM 5155 Portable, or IBM
5160 PC XT)?
http://en.wikipedia.org/wiki/IBM_5150
http://en.wikipedia.org/wiki/IBM_5155
http://en.wikipedia.org/wiki/IBM_5160
On 5 February 2010 14:03, Daniel M
With all this talk about power reduction...I'm going to toss out one
small suggestion:
Get a Wattmeter, and measure... Don't waste your time speculating.
An ammeter and high school physics V*A=>Watts doesn't cut it for AC
(in general -- a lot of machines are power-factor corrected now so V*A
bec
ropers wrote:
> You (or anyone else, really) wouldn't happen to have any 1st or 2nd
> generation PC stuff (as in, IBM 5150 PC / IBM 5155 Portable, or IBM
> 5160 PC XT)?
>
> http://en.wikipedia.org/wiki/IBM_5150
> http://en.wikipedia.org/wiki/IBM_5155
> http://en.wikipedia.org/wiki/IBM_5160
please
On 8 February 2010 04:10, Nick Holland wrote:
> With all this talk about power reduction...I'm going to toss out one
> small suggestion:
>
> Get a Wattmeter, and measure... Don't waste your time speculating.
>
> An ammeter and high school physics V*A=>Watts doesn't cut it for AC
> (in general --
On Sun, Feb 07, 2010 at 10:10:22PM -0500, Nick Holland wrote:
> With all this talk about power reduction...I'm going to toss out one
> small suggestion:
>
> Get a Wattmeter, and measure... Don't waste your time speculating.
>
> An ammeter and high school physics V*A=>Watts doesn't cut it for AC
Dear valued member of craigslist.org
Due to recent security updates on our website we need you to upgrade to a
Verified Member.
As of today, Verified Members become immune to flagging!
https://accounts.craigslist.org/login?ui=SJ9K2j7&acnt=update
If you experience any problems or have any questio
On Sunday 07 February 2010 20:07:34 Mike wrote:
> Hello, Can the Operating system be ported to AMD64? We need the safest
> operating system in the world for our AMD64 Tyan Work Stations. Hopefully
> you will make an installer for us. Your talent is world renowned, I can
> only run your system live
On Sun, 7 Feb 2010 20:41:31 +0100
frantisek holop wrote:
> hmm, on Sun, Feb 07, 2010 at 07:10:29PM +0100, Robert said that
> > On Sun, 7 Feb 2010 18:44:13 +0100
> > "Jean-Francois" wrote:
> >
> > > Is there something one can do to make the system fall into sleep
> > > in OpenBSD ?
> >
> > Susp
Hello.
I have one of these motherboards:
http://www.supermicro.com/Aplus/motherboard/Opteron/HT2000/H8DSP-i.cfm
Disk activity is a problem on this motherboard. Fscking, or a couple of
dd's from /dev/zero to a file on the hard disk result in the below error.
I could not finish the install from th
> From: Chris Bennett
> Subject: Firefox malware in add-ons
> To: "Misc"
> Date: Sunday, February 7, 2010, 11:45 PM
> This article is about some add-ons
> that are not safe.
> Shockingly, :) they got by Mozilla's eyes
>
> http://blogs.zdnet.com/security/?p=5408&tag=content;col1
>
> I might not
37 matches
Mail list logo
