On Fri, Jun 17, 2011 at 7:47 AM, Donald Reichert
wrote:
> Hi list,
>
> I'm preparing a pair of new servers, each equipped with a bunch of NICs in
order to replace some Cisco gear doing BGP and friends.
>
> What puzzles me right now is how to configure the stuff HD-wise. I have two
SSDs in each of
Hi list,
I'm preparing a pair of new servers, each equipped with a bunch of NICs in
order to replace some Cisco gear doing BGP and friends.
What puzzles me right now is how to configure the stuff HD-wise. I have two
SSDs in each of the machines, my initial planning was to do some RAID-1 in
ord
> On Thu, Jun 16, 2011 at 3:33 PM, Michal Mazurek wrote:
> > After moving my old laptop around I got home, booted it and got a very
> > distressing message:
> >
> > messages.2.gz:Jun 14 22:40:09 hopek /bsd: acpitz2: Critical temperature
> > 4938C (52112K), shutting down
> >
> > Perhaps some dust m
Faith and Science
Moon Splitting
Splitting of Moon
Moon Cracked
nasser...@maktoob.com
I have a Soekris net 5501 and a ral RT2860/2850 PCI card (dmesg
below). B While trying to use the system for an access point, I
discovered a way to consistently cause the system to hang. B (Note:
This is *different* from a similar, now fixed, system hang that I
reported circa 4.6-beta).
To cause t
Hello,
You have been invited by Joel Nard to join Tobri. To join, please
follow the link below:
http://www.tobri.com/invite/signup?ref=6117&email=misc%40openbsd.org&code=e4c
570c
Hey, here is a FREE piece of
software for us marketers! Check it out
htt
in response to the 18x18ja.bdf out of memory issue while using
GNU cvs on the server, i've implemented support for opencvs to run
the cvs server also.
as it has always been, one can access GNU cvs on the server side with:
CVSROOT=anon...@openbsd.mirror.frontiernet.net:/cvs
and now one
On Thu, Jun 16, 2011 at 03:45:15PM -0300, Christian Lyra wrote:
> Hi all,
>
> I4m testing OpenBGPD on a route-server/IX topology. My testing case
> has one Route Server (RS), 3 AS (AS1, AS2, AS3) and a fourth client AS
> (AS4) connected to AS2 and AS3. The following "ascii" figure shows the
> topo
Solicita la informacion completa e Inscribase si tiene interes en
participar.
Necesitamos reunir un minimo de participantes para impartir este Curso.
CURSO TALLER
Entrevista por Competencias
Duracion: (1 dia) 9 hrs.
Inversion: $3,450 pesos mas IVA
BENEFICIOS:
Al tirmino del curso, los partici
Si no puedes ver este correo, haz click en el siguiente vinculo
http://www.gtventas.com/boletines/2011/marzo/14.htm
PROMOCIONES 2011
[IMAGE]
[IMAGE] [IMAGE]
Bajos las normas internacionales de ANTI-SPAM este correo cumple con la
opcisn de poder ser removido de la lista
por favor responder dar d
On Thu, Jun 16, 2011 at 7:36 PM, Amit Kulkarni wrote:
> P.S anybody willing to post a "xorg.conf" for a dual monitor config
> (dual DVI) for any NVIDIA card to the list or to me privately?
Dual head is is not supported by the nv driver except for the cards
with a G80 chipset, where you can use
On Thu, Jun 16, 2011 at 3:33 PM, Michal Mazurek wrote:
> After moving my old laptop around I got home, booted it and got a very
> distressing message:
>
> messages.2.gz:Jun 14 22:40:09 hopek /bsd: acpitz2: Critical temperature
> 4938C (52112K), shutting down
>
> Perhaps some dust moved around, or
It was pointed out to me to attach acpidump and dmesg. Kernel is custom
built to include bce.
--
Michal Mazurek
[demime 1.01d removed an attachment of type application/octet-stream]
[demime 1.01d removed an attachment of type application/octet-stream]
[demime 1.01d removed an attachment of typ
The real issue is in acpiec. Several attempts have been made at fixing
this but none has been working reliably enough :-(
On Thu, Jun 16, 2011 at 08:33:38PM +0200, Michal Mazurek wrote:
> After moving my old laptop around I got home, booted it and got a very
> distressing message:
>
> messages.2
Hi all,
I4m testing OpenBGPD on a route-server/IX topology. My testing case
has one Route Server (RS), 3 AS (AS1, AS2, AS3) and a fourth client AS
(AS4) connected to AS2 and AS3. The following "ascii" figure shows the
topology:
RS
---
|
After moving my old laptop around I got home, booted it and got a very
distressing message:
messages.2.gz:Jun 14 22:40:09 hopek /bsd: acpitz2: Critical temperature
4938C (52112K), shutting down
Perhaps some dust moved around, or a cable disconnected.
Unfortunately, the system shut down before it
Good day to you Dear,
My name is Miss Rose, i saw your profile today,i decided to contact you base
on your searching, if you wouldn't mind,i will be so happy for you to
contact me directily through this email addresss (
r.morga...@yahoo.com ),so we can discuss according to your details to
what you
Hi,
I am trying to use two graphics card on two separate PCIe x16 slots. I
can see the newly attached graphics card, a Radeon in the dmesg
(/var/log/messages), but the displays which are connected to each card
don't give any output anytime, right from BIOS boot. When I disconnect
any single of the
>On 06/12/11 02:49, Giridhari wrote:
>> Your criticism is welcome- it gives me perspective of what I am
>> looking at, and how to tackle this. You've told me to think and what
>> to think about. I am not trying to get out of work I will have to do
>> anyway, I just wasn't sure where to look at t
On 2011-06-16 14:43, Peter Hallin wrote:
>
> I didn't get that far. When connecting the two ports to each other (tried
> with a couple of TP cables) I only get 1000baseT full-duplex on ix0 and
> ix1.
Nevermind that. After a reboot with the cables connected the interfaces
show up as 10GbaseT full-
On 2011-06-15 22:40, Jonathan Gray wrote:
>
> Yes this seems low indeed. You could try use rdomains and route exec
> with a cable between the two ports to make packets go over the interfaces
> if you don't have another host with 10G interfaces.
I didn't get that far. When connecting the two port
On 2011-06-15 13:58, FRLinux wrote:
> Just out of curiosity, which iperf settings did you use?
Just standard TCP, iperf -c hostname
>
> I know this is on a Linux box, but just out of interest, I get full
> speed there:
Yeah, sure it works on Linux, but that's not what I'm running. Otherwise
it'
[IMAGE]
!Promociones Especiales para grupos!
Capacitacisn Impartida por: Mtro. Gerardo Coronado Lspez
Pms Capacitacisn Efectiva de Mixico presenta:
Taller de Licitaciones para la LEY de Obras Pzblicas y su Reglamento
Experto Consultor Mtro. Gerardo Coronado Lspez
Empresa Registrada ante la S
[IMAGE]
Pms Capacitacisn Efectiva de Mixico presenta:
Seminario-Taller de Licitaciones Pzblicas Preparacisn y Evaluacisn de
Propuestas para el Sector Salud
Exclusiva presentacisn 27 de Junio en la Ciudad de Mixico
Expositor: Mtro. Gerardo Coronado Lspez
10 horas de entrenamiento
Cupo Limitado
On Wed, Jun 15, 2011 at 05:24:20PM +0200, Christian Weisgerber wrote:
> Alexandre Ratchov:
>
> > > I would, but there shouldn't be anything required to make it work.
> > > The point of AC3/DTS pass-through mode is that it sends what looks
> > > like 16-bit stereo audio at the S/PDIF level. It's o
25 matches
Mail list logo