On Tue, Nov 16, 2021 at 3:03 PM Noth wrote:
>
> Run the installer as usual, then once that has finished:
>
> umount /mnt2 (this is where the install sets are)
>
> remove installer usb drive and insert usb drive with the firmware
>
> mount /dev/sd1a (or sd1i if using vfat) /mnt2
>
> cp
Hello,
I changed MAC address:
$ cat /etc/hostname.re0
-inet
dhcp lladdr 00:0d:b9:35:39:2e
$ sh /etc/netstart re0
My NIC got new_MAC.
Now, I want to restore the vendor's MAC:
$ cat /etc/hostname.re0
-inet
dhcp
$ sh /etc/netstart re0
NIC still has the new_MAC.
$ reboot
NIC still has the new_MAC.
Under the circumstances below, syslogd stops sending data to a remote,
central logging server:
* If the destination cannot be resolved via DNS etc on start up
* If the central logging server becomes unavailable
* There is a network interruption between the syslogd host and the central
>
> > On Sun, Nov 14, 2021 at 10:40:28PM +0100, na...@poczta.fm wrote:
>> Hi misc@,
>>
>> While testing the U-blox MPCI-L210 LTE modem on OpenBSD -current
>> (the modem is attached as a cdce(4) device, the router mode is enabled;
>> other modes are also available), I noticed that the
Hi,
Unfortunately, I already tried using those header settings during my
testing. And those don't solve my problem.
What 'match header set "Keep-Alive" value "$TIMEOUT"' does is force
relayd(8) to send a Keep-Alive header to httpd(8). But httpd(8) is
already replying with a "Connection:
You didn't say what you used for boot, but I guess it is minirootXX.img.
Use installXX.img or installXX.iso - I don't remember what is the
difference between them or what is the purpose for each one, I didn't used
them in years.
Those images contain the sets and you can proceed with full disk
Hi,
Thanks everyone for the feedback!
It's actually quite unbelievable, but I have this working in less than
an hour. I found a USB camera that I already had that is supported by
uvideo(4).
fswebcam is talking to it nicely and capturing a still every 15
seconds. ffmpeg is stitching the
Run the installer as usual, then once that has finished:
umount /mnt2 (this is where the install sets are)
remove installer usb drive and insert usb drive with the firmware
mount /dev/sd1a (or sd1i if using vfat) /mnt2
cp /mnt2/iwn-firmware-version.tgz /mnt/root
chroot /mnt
pkg_add
Hi,
if you need a comfortable installation you would need to
integrate them into the installation blob.
AFAIK this is tricky.
-Stefan
> -Ursprüngliche Nachricht-
> Von: Luca Ferrari
> Gesendet: Dienstag, 16. November 2021 14:46
> An: Kapfhammer, Stefan
> Cc: misc@openbsd.org
>
Hi,
yes, you need to do stuff manually, because you are going an unusual way.
-Stefan
> -Ursprüngliche Nachricht-
> Von: Luca Ferrari
> Gesendet: Dienstag, 16. November 2021 13:18
> An: Kapfhammer, Stefan
> Cc: misc@openbsd.org
> Betreff: Re: adding firmware during installation
>
>
On Tue, Nov 16, 2021 at 2:30 PM Kapfhammer, Stefan wrote:
> yes, you need to do stuff manually, because you are going an unusual way.
the fact is, as far as I understand, that before installing etc.tgz
the system will not have /etc/firmware writable, and at that time I
can simply reboot and
Hi,
extract the files of the firmware package before and place them
in [mountpoint-during-installation]/etc/firmware.
-Stefan
> -Ursprüngliche Nachricht-
> Von: owner-m...@openbsd.org Im Auftrag
> von Luca Ferrari
> Gesendet: Dienstag, 16. November 2021 12:34
> An: misc@openbsd.org
>
On Tue, Nov 16, 2021 at 12:44 PM Kapfhammer, Stefan wrote:
> extract the files of the firmware package before and place them
> in [mountpoint-during-installation]/etc/firmware.
Sorry, but this is not clear to me: what do you mean with mountpoint?
Because I'm installing from rd0a, that is not
On Tue, Nov 16, 2021 at 12:49 PM Jan Stary wrote:
> But you already have the iwn firmware,
> so you must have some other connection ...
I don't have ethernet connection, or it would be easier!
I have downloaded the firmware from another computer, and placed into
a second USB stick that I mount
If iwn is your _only_ connection,
you need to have the iwn firmware.
Can you install with ethernet plugged it?
That will download the firmware for you.
But you already have the iwn firmware,
so you must have some other connection ...
On Nov 16 12:34:16, fluca1...@gmail.com wrote:
> Hi all,
>
On 2021/11/15 20:25, Mike Larkin wrote:
> On Mon, Nov 15, 2021 at 05:39:23AM -0800, makef...@riseup.net wrote:
>> Hello misc@!
>> I hope this is correct place to report this issue
>>
>> Description:
>> Plan9front (all versions?) boots much slower on 7.0's vmm, they
>> work correctly on
Hi all,
I'm installing OpenBSD 7.0 on a Lenovo Thinkpad T410, and I need the
firmware iwn-firmware-5.11p1.tgz for the wireless card.
Therefore, I opened a shell from the installer, mounted the USB stick
I placed the downloaded firmware on, and now I'm stuck: I cannot
install it because pkg_add is
17 matches
Mail list logo
