Re: ipsec vpn unexpected flow

On Thu, 11/25/10, Andrea Parazzini a.parazz...@sirtisistemi.net wrote: Hi, we have a vpn connection with a customer. The remote peer is not under our management. Our box is an OpenBSD 4.7 i386. We have configured the vpn as follows: /etc/rc.conf.local ipsec=YES isakmpd_flags=-K -v

Re: ipsec vpn unexpected flow

On Fri, 26 Nov 2010 10:32:59 +0330, Bahador NazariFard bahador.nazarif...@gmail.com wrote: On Fri, Nov 26, 2010 at 8:50 AM, Andrea Parazzini a.parazz...@sirtisistemi.net wrote: Hi, from 10.1.0.0/16 is the network id that I would negotiate with the remote peer. (0.0.0.0/0) is our real

Re: ipsec vpn unexpected flow

On Fri, 26 Nov 2010 12:58:09 + (UTC), Stuart Henderson s...@spacehopper.org wrote: On 2010-11-25, Andrea Parazzini a.parazz...@sirtisistemi.net wrote: As you can see there is a flow that is not configured on our box. It is probably configured on the remote peer. Is a normal behavior

ipsec vpn unexpected flow

Hi, we have a vpn connection with a customer. The remote peer is not under our management. Our box is an OpenBSD 4.7 i386. We have configured the vpn as follows: /etc/rc.conf.local ipsec=YES isakmpd_flags=-K -v /etc/ipsec.conf ike active esp tunnel \ from 10.1.0.0/16 (0.0.0.0/0) to

Re: ipsec vpn unexpected flow

traffic in the tunnel?3. is nat allowed in the tunnel? 4. you may have let in more networks than you realize -damon --- On Thu, 11/25/10, Andrea Parazzini a.parazz...@sirtisistemi.net wrote: From: Andrea Parazzini a.parazz...@sirtisistemi.net Subject: ipsec vpn unexpected flow To: misc

Re: Any good/bad experiences on OpenBSD4.6-release Dell R(2|4|6)10 or HP DL320 G6

wrote: On 2010-01-16, Andrea Parazzini a.parazz...@sirtisistemi.net wrote: The controller Dell SAS6IR does not have cache. the disks have write cache, though; the controller probably disables this unless you tell it otherwise, http://kerneltrap.org/mailarchive/openbsd-tech/2008/5/5/1725504 I

Re: Any good/bad experiences on OpenBSD4.6-release Dell R(2|4|6)10 or HP DL320 G6

to enable that by default. On Thu, Jan 14, 2010 at 11:46:18PM +0100, Andrea Parazzini wrote: We have some Dell R610 and they do not work very well with OpenBSD: - very bad disk performance, perhaps the mpi(4) driver. - the optional Intel PRO/1000 QP does not work well (see my previous post

Re: Any good/bad experiences on OpenBSD4.6-release Dell R(2|4|6)10 or HP DL320 G6

We have some Dell R610 and they do not work very well with OpenBSD: - very bad disk performance, perhaps the mpi(4) driver. - the optional Intel PRO/1000 QP does not work well (see my previous post). - amd64 version does not work. I have not tried the latest snapshots. Regards, Andrea On Tue,

Intel PRO/1000 QP

Hi, we have a Dell PowerEdge R610 with two Intel PRO/1000 QP cards connected to a Cisco 2960G switch. Each card has four giga interfaces, but only two interfaces per card work properly. Works only the first and third interface of each card. The other interfaces do not negotiate the correct speed.

iwi(4) does not work with latest snapshot

Hi misc, iwi(4) does not work, it worked well with 4.3: iwi0: timeout waiting for ucode to initialize iwi0: could not load microcode iwi0: fatal firmware error iwi0: timeout waiting for firmware initialization to complete iwi0: could not load main firmware Regards, Andrea Parazzini OpenBSD 4.4

bnx and vlan

/1000baseT PHY, rev. 6 tcpdump shows something like 10:55:40.124521 802.1Q vid 512 pri 1 cfi arp who-has 10:55:40.124841 802.1Q vid 768 pri 1 cfi arp who-has 10:55:40.133313 802.1Q vid 1024 pri 3 CARPv2-advertise 36: vlan id don't match the switch vlan id Thanks. Regards, Andrea Parazzini