Quoting Stuart Henderson :
No - you wouldn't do it with Unbound which is a *recursive* DNS
server, you would use an authoritative one like NSD, PowerDNS, Knot
or BIND. All you would do with Unbound is use stub-zone to point it
at an authoritative server.
--
Sent from a phone,
exec xterm &
+ "Firefox" exec firefox &
+ "Calculator" exec xcalc &
+ "Restart fvwm" Restart fvwm
+ "Start cwm" Restart cwm
+ "Lock Screen" exec xlock
On 4/25/19 8:42 AM, Vijay Sankar wrote:
On 4/25/19 2:07 AM, Remco wrote:
On 25-04-19 01:02, Christian Weisgerber wrote:
I don't remember if I ever posted it, but I've been using an "upgrade"
script to download bsd.rd, verify it, move it to /bsd, and reboot.
With florian@'s
obably due to some stupid thing I was doing with bios settings.
I will work further and report back to the list and naddy@
Thanks again for the script,
Vijay
--
Vijay Sankar
ForeTell Technologies Limited
vsan...@foretell.ca
On 4/15/19 8:38 AM, Hrvoje Popovski wrote:
On 14.4.2019. 20:10, Tuyosi T wrote:
hi all .
the samba of snapshots does not start .
dell# /etc/rc.d/samba start
smbd(timeout)
I have similar problem with samba after upgrade to 4.8.11, smbd timeouts
but it starts.
# rcctl stop samba
xjhdRzlRkqS50DKFgmVT5z2FN34nDgdLRq3K+vO24jpYAWVYrrrgLsZkqpHp
YfNpOU1pMraiVWKWxEm1K8sqrIraunJoXU1DeBwsRveIm9W8lQhrakOK5w/A
LP7NegSZljctRmTvLDkSwkgdR9mH18y/DFAjj+TlA3oLNB+EkKGRgBxuEddb
BgoAU+9+PSgpoAUGXeWGlp/Q0caUP7lM/VlovbBJF8l+1uEZtc1euwtw8fo/
+cxZXDiMzDbouZAvSqG/60E=
=5R2I
-END PGP SIGNATURE-
--
Vijay
layerprox dev
--
Vijay Sankar
ForeTell Technologies Limited
59 Flamingo Avenue
Winnipeg, MB, Canada
R3J 0X6
types" }
Thank you
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
Quoting John Long :
I found a lot of PRO/1000 adapters listed in the em driver man page but
CT version is not included.
Does anybody know?
Thanks
/jl
Since the CT version uses the Intel 82574L Controller, I think it will work.
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
drmioctl+0xf9
#11 VOP_IOCTL+0x5a
#12 vn_ioctl+0x6b
#13 sys_ioctl+0x477
#14 syscall+0x32a
#15 Xsyscall_untramp+0xe4
lock order ">lock"(rwlock) -> ">struct_mutex"(rwlock) first
seen at:
#0 witness_checkorder+0x4c0
#1 _rw_enter_write+0x53
#2 i915_gem_object_wait_rendering__nonblocking+0x1fa
#3 i915_gem_fault+0x144
#4 drm_fault+0x18a
#5 uvm_fault+0x743
#6 pageflttrap+0x14c
#7 trap+0x2b6
#8 recall_trap+0x8
Only additional thing I have in /etc/rc.conf.local is
multicast=YES
All KDE seems to work fine here (-current from June 21, 2018)
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
Quoting John Long :
On Mon, 2018-06-25 at 09:25 -0500, Vijay Sankar wrote:
Quoting John Long :
> Been a while and don't have my other OpenBSD boxes accessible.
>
> What are the recommended partitions and appropriate sizes for
> people
> who want to track stable and possibly
to
build all the packages.
HTH,
Vijay
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
home/ports/infrastructure/man/man1/dpb.1 | less'
alias manbulk='mandoc -Tascii
/home/ports/infrastructure/man/man8/bulk.8 | less'
export JAVA_HOME=/usr/local/jre-1.8.0/
export PATH=$PATH:/usr/local/jre-1.8.0/bin
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
onitor telnet:127.0.0.1:1081,server,nowait \
-m 4096 -hda openbsd63.img -nographic &
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
penBSD/PkgCheck.pm line 889.
Unknown file system entries.
etc.
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
Quoting Vijay Sankar <vsan...@foretell.ca>:
Quoting Vijay Sankar <vsan...@foretell.ca>:
Quoting Stefan Sperling <s...@stsp.name>:
On Tue, Jan 23, 2018 at 11:50:28AM -0600, Vijay Sankar wrote:
Over the weekend, I was trying to do some tests requested in tech@
(intel
Quoting Vijay Sankar <vsan...@foretell.ca>:
Quoting Stefan Sperling <s...@stsp.name>:
On Tue, Jan 23, 2018 at 11:50:28AM -0600, Vijay Sankar wrote:
Over the weekend, I was trying to do some tests requested in tech@
(inteldrm). I downloaded the latest snapshot but had probl
Quoting Stefan Sperling <s...@stsp.name>:
On Tue, Jan 23, 2018 at 11:50:28AM -0600, Vijay Sankar wrote:
Over the weekend, I was trying to do some tests requested in tech@
(inteldrm). I downloaded the latest snapshot but had problems with iwm
firmware on my laptops (X1 Carbon 5th gen)
/arch/amd64/compile/GENERIC.MP
Please let me know if I am doing something wrong here or if there is
anything I can do to help -- have two new ThinkPad X1 Carbon 5th to
work with (as well as a bunch of other ThinkPads) if any tests would
be useful.
Thanks very much,
Vijay
--
Vijay
on
NYC*BUG. I am using high end enterprise drives on this machine which do
support S.M.A.R.T. and I did enable S.M.A.R.T. in bios.
Cheers,
Predrag
Hi,
smartctl -i /dev/sd0c works
Vijay
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
kend but
please read his reply in this thread.
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
in auth "hmac-sha1" enc "aes" group modp1024 \
quick auth "hmac-sha1" enc "aes" \
psk "mypsk"
in the order listed, it works, and it has been working for at least a
few years. To make sure I am not posting wrong information, I have
1 ipcp IPCP
bind tunnel from L2TP_ipv4 authenticated by LOCAL to tun0
instead of
interface pppx0 address 10.0.0.1 ipcp IPCP
bind tunnel from L2TP authenticated by LOCAL to pppx0
and in pf.conf, I have
pass in quick on tun0 inet proto tcp from 10.0.0.0/24
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
Early this morning I sent a private message to the OP to understand why he was
asking this question. It looked from his reply that the objective was to find
whether someone had entered the same IP address on different workstations and
accessed some unauthorized site.
Not sure if the following
ommunity ${AS}:666 |
sed -e '1,4d' -e 's/\/.*$//' -e 's/[ \*\>]*//' > /var/mail/spamd.black
/usr/libexec/spamd-setup
# EOF
Just double checked and can see it is being updated.
$ ls -l /var/mail/spamd.black
-rw-r--r-- 1 root wheel 233006 May 8 05:20 /var/mail/spamd.black
Hope this helps,
Vijay
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
n to the OpenBSD foundation and/or to Theo de
Raadt. If CD's are going to be released, of course, I would be first
in line since I have all CD's since 2.8 :)
Vijay
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
Oops, don't know what happened to my config that I added below. Sorry
about that.
Anyways, the only thing I recall was that I used the real server name
instead of "default" and it worked and I have not touched the configuration
since then :)
Vijay
Quoting Vijay Sankar <vsan..
aseT
full-duplex,master)
>>>>>>> Â Â Â Â status: active
>>>>>>> Â Â Â Â inet 192.168.60.129 netmask 0xff00 broadcast
>>>>>>> 192.168.60.255
>>>>>>>
>>>>>>> In my httpd.conf all I
ion and not because of -current.
I am not sure if you are running -current on a VM but if so, could it be a
configuration issue with the VM host?
Vijay
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
ion?
> Thanks, Joe
I am assuming you are looking for just smtpd.conf and not suggestions like
"use dovecot and httpd for pop and webmail".
man page is very informative about the different options. May be all you
need is to just change some of the stanzas below taken from the example
local/share/doc/pkg-readmes.
Are you having problems after running sendmail-enable?
Vijay
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
not tried
other OSes.
Sent from my iPhone
> On Oct 30, 2016, at 10:21, Simon Ruderich <si...@ruderich.org> wrote:
>
>> On Sat, Oct 22, 2016 at 05:44:59PM -0500, Vijay Sankar wrote:
>> Hi,
>>
>> In preparation for my retirement in 2050, I am setting up a med
e a mind meld directly from the artist/band to the
listener by then !!!
Vijay
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
better way to do this? Any advice
gratefully appreciated and accepted.
Thank you very much,
Vijay
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
following steps to create this file:
1) Edit /etc/sysctl.conf and add the line
machdep.allowaperture=1
2) Reboot
3) X -configure
Once I did that, there was a file called xorg.conf.new in the root
directory. There was also a log file /var/log/Xorg.1.log that may give you
more details.
Vijay
--
logtype=TUNNELUSAGE
user="xx" duration=58390sec layer2=L2TP_ipv4 layer2from=a.b.c.d:1701
auth=MS-CHAP-V2 data_in=277392bytes,3364packets
data_out=235270bytes,2576packets error_in=1 error_out=0 mppe=yes
mppe_in=128bits,stateless mppe_out=128bits,stateless iface=tun0
Vijay
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
much more
> enjoying the sndiod(8) man page [http://man.openbsd.org/?query=sndiod]
>
> While relevant, the quick idea to jot down the in flight tip at the
> original query for other viewers, now thanks to ratchov@ tj@ tb@ got
> FAQ section 13.5 [http://www.openbsd.org/faq/faq13.html#recordmon]
Tried and it works for me! Thank you very much it is a very nice addition
to the FAQ
Vijay
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
Thank you very much for the detailed explanation and of course for the
virtualization project.
Vijay
Quoting Mike Larkin <mlar...@azathoth.net>:
> On Fri, Apr 08, 2016 at 05:45:12PM -0500, Vijay Sankar wrote:
>> Hi,
>>
>> I was trying to test patches for
Thank you very much.
Sent from my iPhone
> On Apr 9, 2016, at 08:21, Stefan Kempf <sisnk...@gmail.com> wrote:
>
> Vijay Sankar wrote:
>> Hi,
>>
>> I was trying to test patches for vmm and uvm by Stefan Kempf. Everything
>> works great and copie
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (b57b955611f70a33.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
WARNING: invalid time in clock chip
WARNING: CHECK AND RESET THE DATE!
/etc/vm.conf is as follows:
vm "vm1.lab.foretell.ca" {
       enable
       memory 1G
       interfaces 1
       kernel "/home/vm/bsd"
       disk "/home/vm/OpenBSD.img"
}
Please let me know if you have any suggestions on what could be causing the
changes to Guest OS MAC addresses.
Thanks very much,
Vijay
Â
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
ages you had and compared to mine. In my
case, I have
php-fpm-5.6.13p0stand-alone FPM version of PHP
but did not see that in your list.
However, I am using an older snapshot and there may be something else
I am not seeing.
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies
Not clear from your message so I was wondering if you have all the following
on the same switch
ISP interface
External interface of your firewall
Internal interface of your firewall
Interfaces of your other systems
I noticed behaviour similar to what you described when I did something like
the
ion.
Please let me know if you could point me to any examples that would be
the equivalent of Alias.
Thanks very much,
Vijay
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
re wondering, it is a very nice day in Winnipeg (7 Celsius,
42 kmph wind, excellent day for biking :)
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
difficile - Hippocrates (c. 400BC)
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
.
On 18 August 2015 at 09:40, Vijay Sankar vsan...@foretell.ca wrote:
I have had the same issue going back to OpenBSD 4.x ever since I changed
the KVM that had PS2 mouse and keyboard to a KVM with USB mouse etc. As a
result I always thought it was because of my KVM, so did not report it all
Quoting Benny Lofgren bl-li...@lofgren.biz:
On 2015-08-02 08:23, Alessandro DE LAURENZIS wrote:
On Sat 01/08/2015 14:09, Vijay Sankar wrote:
alias nof='ls -l . | egrep -c '^-''
I have always wondered if there is a better way of doing this.
In general, I would avoid using a pipe when
if there is a better way of doing this.
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
Quoting Otto Moerbeek o...@drijf.net:
On Fri, Jul 10, 2015 at 04:04:04PM +, Vijay Sankar wrote:
My objective for this weekend was to follow the new dpb and build ports
without using sudo. So I was hoping to upgrade to the latest snapshot on a
system that I use for tests.
The test system
if you have any suggestions.
Thanks very much,
Vijay
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
.
--STeve Andre'
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
something several years ago. It's great that the
ports tree has
gotten so big that you can't remember it all. ;-)
Something to take a pic and put it in a file would be OK.
--STeve Andre'
--
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
--
Vijay Sankar, M.Eng
Quoting David Coppa dco...@gmail.com:
What's the configuration directory for KDE4 under OpenBSD?
~/.kde4 or ~/.kde ?
TIA,
David
--
If you try a few times and give up, you'll never get there. But if
you keep at it... There's a lot of problems in the world which can
really be solved by applying
for your domain then it is not set up to accept email
relayed through your server.
I am thinking that if there are no DNS issues, then you can use the
default sendmail.cf, edit mailertable to send everything for your
domain.com to the remote mail server and it should work.
Vijay Sankar
, etc.
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell-POST 4.9
on the
date on the postage, it took only 5 days to get it from England (from
Calgary to Winnipeg it used to take 4 days!)
Vijay
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell
Quoting Stuart Henderson s...@spacehopper.org:
On 2014-10-30, Vijay Sankar vsan...@foretell.ca wrote:
Unfortunately that won't work because the objective is to just log any
(successful or failed) attempts to change passwords.
I would probably try to abuse passwordcheck in login.conf to do
Quoting David Coppa dco...@gmail.com:
On Thu, Oct 30, 2014 at 3:07 PM, Vijay Sankar vsan...@foretell.ca wrote:
Quoting trondd tro...@gmail.com:
The second problem I have is that when I change password, out of habit, I
do a passwd instead of mypasswd.
Why not call the script passwd
but could not find any solutions for this in the archives.
Is there a better way to do this? Please let me know if possible.
Thanks very much,
Vijay
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent
Quoting Alexander Hall alexan...@beard.se:
On October 30, 2014 1:26:25 PM CET, Vijay Sankar vsan...@foretell.ca wrote:
I have been using a simple script
# mypasswd.sh
/usr/bin/passwd -l
if [[ $? != 0 ]]; then
/usr/bin/logger Unsuccessful attempt to change password
else
/usr
The goal is mainly to prevent Windows admins from saying that we
cannot log and audit password change events on OpenBSD. I am very
frustrated when I see it being used as an argument for not considering
OpenBSD.
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
.
Unfortunately that won't work because the objective is to just log any
(successful or failed) attempts to change passwords. It does not
matter that this is somewhat useless as far as real security is
concerned.
Vijay
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
debian 7.5, I had to edit the
grub menu and add noapic and nolapic but this was based on info from
various search results. Probably there are better ways of installing
linux as a VM guest on OpenBSD but this worked for me.
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan
works for me.
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell-POST 4.9
wonder if the current OpenLDAP in the ports is still broken ?
Do it supports mdb/hdb/bdb ?
Thanks a lot.
gustavo.
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell-POST 4.9
for people who don't
know computers or English.
I'm particularly intrigued by the radar return bugs.
It's 2014, and somehow I've woken up in a cyberpunk novel.
--
Christian naddy Weisgerber na...@mips.inka.de
Thank you very much! This is very interesting..
Vijay
Quoting Wesley MOUEDINE ASSABY open...@e-solutions.re:
Hi,
A new how to about PF and relayd :
http://www.mouedine.net/relayd
Cheers,
Wesley MOUEDINE ASSABY
Nice! Thanks very much,
Vijay
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
:c8ff:feef:af31%axe0 prefixlen 64 scopeid 0x5
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell-POST 4.9
that forwarding is
enabled and there is an IP address on fxp0 -- your internal interface.
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell-POST 4.9
Are you using dhcp on fxp0? I thought I noticed log entries where fxp0
did not get the IP address it was requesting for.
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell-POST 4.9
but so far have ended up back
with KDE3. FWIW, it works very well for us.
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell-POST 4.9
very much,
Vijay
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell-POST 4.9
Thank you very much. I just could not figure this out and was puzzled by why
this would be happening. I have asked people at vtiger for some advice as well
and if I get anything useful will send it to the list.
Thanks again,
Vijay Sankar
ForeTell Technologies Limited
vsan...@foretell.ca
Sent
(initdb -D
/var/postgresql/data/) on OpenBSD 5.3.
Thanks.
O.D.
We usually do something like the following:
pkg_scripts=clamd squid havp postgresql nginx
and it works properly
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
but
I need a history log.
Thanks for help,
Radek
/var/log/messages or /var/log/daemon has all those details.
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell-POST 4.9
=openbsd-miscm=135820160219059
The following is more useful than what I wrote
http://marc.info/?l=openbsd-miscm=135821142622739w=2
Hope this helps,
Vijay
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message
Quoting Ted Unangst t...@tedunangst.com:
On Thu, Apr 18, 2013 at 18:28, Vijay Sankar wrote:
I am trying to replace an Apple Extreme base station with an OpenBSD
router and tried quite a few Linksys/Cisco, D-Link etc., wireless USB
adapters but none of them seem to support hostap mode
Quoting Erling Westenvik erling.westen...@gmail.com:
On Thu, Apr 18, 2013 at 06:28:23PM -0500, Vijay Sankar wrote:
I am trying to replace an Apple Extreme base station with an OpenBSD
router and tried quite a few Linksys/Cisco, D-Link etc., wireless
USB adapters but none of them seem
USB wireless NIC that uses ral or rum.
What currently available wireless USB adapter would support hostap?
Please let me know if you have any suggestions.
Thanks very much,
Vijay
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (57748c3cc64b8e08.a) swap on sd0b dump on sd0b
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent
Quoting Stuart Henderson s...@spacehopper.org:
On 2013-04-03, Vijay Sankar vsan...@foretell.ca wrote:
The following system runs -current from January 2013 without any
problems. But attempts to install from the past few snapshots have
failed.
Installation of April 2, 2013 -current went through
mailertable should work in this case, I think.
Vijay Sankar
ForeTell Technologies Limited
vsan...@foretell.ca
Sent from my iPhone
On 2013-03-21, at 7:23 AM, Paul de Weerd we...@weirdnet.nl wrote:
For the sendmail heroes out there... Let's say I have the following
in DNS:
$ORIGIN
Sorry, I misunderstood. I thought you wanted mail from www.example.com
addressed to u...@example.com to go to a specific mail server and not be
delivered to a local account. Did not clue in that you were using example.com
to refer to ALL domains, not just your own domain.
Vijay Sankar
-- NOT http traffic. The browser is Firefox
13.0.1 and it uses the squid proxy for all protocols including HTTPS.
Vijay
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell-POST 4.9
Quoting Stuart Henderson s...@spacehopper.org:
On 2013/03/12 10:49, Vijay Sankar wrote:
Quoting Jiri B ji...@devio.us:
On Tue, Mar 12, 2013 at 01:00:58PM +, Stuart Henderson wrote:
On 2013-03-10, Rosen Iliev ro...@mynshosts.com wrote:
Transparent proxy will not be useful for HTTPS
versions on OpenBSD to run OpenLDAP. Not sure, just a thought.
Since the ports.tar.gz file is on the CD, you may be able to build the
older packages even though they are obsolete and not available at the
OpenBSD FTP site.
Vijay
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan
I am using db-4.6.21p4
Quoting Friedrich Locke friedrich.lo...@gmail.com:
Hi,
sounds strange. Claudio said it was borked for amd64.
Are you using BDB ? Which version ?
On Mon, Jan 14, 2013 at 8:10 PM, Vijay Sankar vsan...@foretell.ca wrote:
Quoting Friedrich Locke friedrich.lo...@gmail.com
3840 1080
EndSubSection
EndSection
Vijay
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell-POST 4.9
to achieve similar results
called Soft Updates. Please read FAQ 14 - Soft Updates to get more
details.
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell-POST 4.9
will answer your
question correctly.
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell-POST 4.9
to type in
export TERM=vt220
or something like that
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell-POST 4.9
://www.openbsd.org/papers/
Thank you for posting this link. That was an excellent paper. I really
learned a few things from this.
Vijay
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell-POST 4.9
Quoting Stuart Henderson s...@spacehopper.org:
On 2012-01-28, Vijay Sankar vsan...@foretell.ca wrote:
Hi,
Sorry for the long message. I am not able to figure out a good
solution for the following:
Right now, what I do to test ports etc., is download install51.iso,
run it within qemu
publicdmz:network to any nat-to (pppoe0)
pass out log on pppoe0 from lan:network to any nat-to (pppoe0)
pass out log on pppoe0 from publicdmz:network to any nat-to (pppoe0
Hope this helps.
Vijay
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
12859040 4.2BSD 2048 163841 # /home
Any clues greatly appreciated.
Thanks very much,
Vijay
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
much anything including libreoffice and so
on.
Vijay Sankar, M.Eng., P.Eng.
ForeTell Technologies Limited
vsan...@foretell.ca
-
This message was sent using ForeTell-POST 4.9
Is there a way to get sendmail to use SMTP AUTH and LDAPMAP without recompiling
all the binaries?
I would like to change from the default
Version 8.14.3
Compiled with: DNSMAP LOG MAP_REGEX MATCHGECOS MILTER MIME7TO8 MIME8TO7
NAMED_BIND NETINET NETINET6 NETUNIX NEWDB NIS
Quoting Stuart Henderson s...@spacehopper.org:
On 2011-09-29, Vijay Sankar vsan...@foretell.ca wrote:
Is there a way to get sendmail to use SMTP AUTH and LDAPMAP without
recompiling all the binaries?
I would like to change from the default
Version 8.14.3
Compiled with: DNSMAP LOG
Quoting Jay Em Cee j...@cosmicnetworks.net:
--- Vijay Sankar [Thu, Sep 29, 2011 at 08:00:29AM -0500]: ---
Is there a way to get sendmail to use SMTP AUTH and LDAPMAP without
recompiling all the binaries?
...
without rebuilding userland.
The way I do it right now is by adding
1 - 100 of 281 matches
Mail list logo
