knitti wrote:
On 10/19/07, Stephen Bosch <[EMAIL PROTECTED]> wrote:
Other things I've tried:
- moving the Jetdirect to a different port on the same physical switch
- a variety of static and dynamic IPs in the subnet
I also forwarded the external port 9100 to this print server and tried
to acce
knitti wrote:
On 10/19/07, Stephen Bosch <[EMAIL PROTECTED]> wrote:
Other things I've tried:
- moving the Jetdirect to a different port on the same physical switch
- a variety of static and dynamic IPs in the subnet
I also forwarded the external port 9100 to this print server and tried
to acce
Jussi Peltola wrote:
Does the print server have the right gateway configured?
Yeah. Checked that.
Does scrub have any effect (fragments get dropped in some cases if scrub
is off - that bit me once with openvpn)?
I think scrub is on, though -- I'll have to look again.
Wouldn't tcpdump tell
Claudiu Pruna wrote:
hi Stephen,
No offense, but did you check JetDirect's ip settings about the default
gateway ?
None taken. Yes, I did actually check that, and it was correct.
Try an tcpdump on the ethernet interface at site A while trying to print
from site B and check if you "see" packe
On 10/19/07, Stephen Bosch <[EMAIL PROTECTED]> wrote:
> Other things I've tried:
>
> - moving the Jetdirect to a different port on the same physical switch
> - a variety of static and dynamic IPs in the subnet
>
> I also forwarded the external port 9100 to this print server and tried
> to access it
On Fri, 2007-10-19 at 00:30 -0600, Stephen Bosch wrote:
> Hi, folks:
>
> Here's a good one for you.
>
> I have an IPsec tunnel running between two OpenBSD boxes. One is still
> running 3.8 (yes, it needs to be updated) and the other is running 4.1.
>
> There is a functioning tunnel running betw
Does the print server have the right gateway configured?
Does scrub have any effect (fragments get dropped in some cases if scrub
is off - that bit me once with openvpn)?
Wouldn't tcpdump tell you more about the packets coming back from it?
I'd probably just use rdr and a TCP proxy on some machine
Hi, folks:
Here's a good one for you.
I have an IPsec tunnel running between two OpenBSD boxes. One is still
running 3.8 (yes, it needs to be updated) and the other is running 4.1.
There is a functioning tunnel running between the two devices.
Hosts on one end can "see" hosts on the other, a
8 matches
Mail list logo
