On Mon, Aug 20, 2018 at 09:21:54PM +, Walt wrote:
> I don't really remember for sure from the last time I did a fresh install,
> but I think that /etc/sysctl.conf isn't there by default -- if you need it,
> you have to create it yourself.
>
> Walt
>
Having done multiple fresh installs over
On August 20, 2018 3:58 PM, Jay Hart wrote:
> Well, turned out that was indeed the issue, but only because [for some
> reason] sysctl.conf did not
> exist on the box...which I think instead of deleting the backup file, I must
> have by mistake
> deleted /etc/sysctl.conf. A quick copy over and a
>>> 2. I have a fully working pf.conf file on my current server, copied it
>>> over to my new server and
>>> made a few corrections since the interfaces are different, but thats
>>> about it. The problem is
>>> this: the new router boots up and dhclient goes and gets a lease, and
>>> I have an ip
>>> 2. I have a fully working pf.conf file on my current server, copied it
>>> over to my new server and
>>> made a few corrections since the interfaces are different, but thats
>>> about it. The problem is
>>> this: the new router boots up and dhclient goes and gets a lease, and
>>> I have an ip
2. I have a fully working pf.conf file on my current server, copied it
over to my new server and
made a few corrections since the interfaces are different, but thats
about it. The problem is
this: the new router boots up and dhclient goes and gets a lease, and
I have an ip address. I can
ping e
Not a pf magician, but think I found a typo below that could be the problem.
On Aug 19, 2018 6:51 PM, Jay Hart wrote:
>
> Hello all,
>
> I finally got my "new" server online, still have to disable inteldrm to get
> it to boot though.
>
> Ran into two issues upon initial bootup:
>
> 1. DHCPD fail
The pf.conf file below is from my working router. If you read my post, and
then look at the
interfaces, you will then tell me that is wrong. This works on my current
router, but not the new
one, even though the interfaces are correct for that box, ad pf.conf has been
updated to reflect
that.
Hello all,
I finally got my "new" server online, still have to disable inteldrm to get it
to boot though.
Ran into two issues upon initial bootup:
1. DHCPD failed to start, trying to troubleshoot that one.
2. I have a fully working pf.conf file on my current server, copied it over to
my new s
8 matches
Mail list logo