On 11/14/22 3:35 AM, Stuart Henderson wrote:
That is just for APC UPS.
I know it's supposed to be just for APC UPSes, but it's my understanding
that apcupsd works, at least for some, CyberPower UPSes.
On 2022-11-14, ITwrx wrote:
> On 11/13/22 12:56 PM, Peter Fraser wrote:
>> My sensorsd.conf contains
>>
>> hw.sensors.upd0.percent0:low=99.00%:command=/etc/ups-shutdown %2
>>
>> The 99.00% was to allow me to test it easily
>>
>> As far as I could tell there is no way to ask sensorsd to only run
Good morning,
p...@thinkage.ca (Peter Fraser), 2022.11.13 (Sun) 19:56 (CET):
> My old UPS dies, it was very old I had been changing batteries on it
> for years. It was so old that it used a serial port for
> communications.
>
> I replace it with a new CyberPower cp1500PPFCLCD.
&
On 11/13/22 12:56 PM, Peter Fraser wrote:
My sensorsd.conf contains
hw.sensors.upd0.percent0:low=99.00%:command=/etc/ups-shutdown %2
The 99.00% was to allow me to test it easily
As far as I could tell there is no way to ask sensorsd to only run a program
when the UPS is not charging and the %
On Sun, Nov 13, 2022, at 3:49 PM, Kenneth Hendrickson wrote:
> --- On Sunday, November 13, 2022, 01:56:12 PM EST, Peter Fraser
> wrote:
>
>> I replace it with a new CyberPower cp1500PPFCLCD.
>
> You poor bastard. If this company has anything to do with the
> CyberPower
--- On Sunday, November 13, 2022, 01:56:12 PM EST, Peter Fraser
wrote:
> I replace it with a new CyberPower cp1500PPFCLCD.
You poor bastard. If this company has anything to do with the CyberPower PC
that I bought a PC from a few years ago, you made a big mistake in buying from
them.
My old UPS dies, it was very old I had been changing batteries on it for years.
It was so old that it used a serial port for communications.
I replace it with a new CyberPower cp1500PPFCLCD.
I connected the USB cable and OpenBSD found
Nov 13 12:29:45 fw /bsd: uhidev0 at uhub0 port 4
7 matches
Mail list logo
