On Thu, Feb 8, 2018, at 7:02 AM, Mihai Popescu wrote:
> > Then i setup only one port using configure command all ports work normally.
>
> I worked a lot with multiple RS-232 ports boards. They all had some
> hardware jumpers to configure the IRQ and Address for each port ( a
> lot of jumpers!). Ma
On 02/08/18 04:31, Захаров Анатолий wrote:
> I install OpenBSD on my Fastwell CPB905 Singleboard compter. IT have
> 4-RS-232 port on same IRQ, but on different address on isa bus. Then i
> setup only one port using configure command all ports work normally. But
> when i setup 2 of them in one boot
On Thu, Feb 8, 2018 at 1:02 PM, Mihai Popescu wrote:
>
> How did you manage to find and even install 3.8 ?
>
>
To his defense, he didn't say he installed 3.8. Only what he found
something in the 3.8 documentation.
> Then i setup only one port using configure command all ports work normally.
I worked a lot with multiple RS-232 ports boards. They all had some
hardware jumpers to configure the IRQ and Address for each port ( a
lot of jumpers!). Maybe this option is integrated in your board BIOS,
check it.
How
On Thu, Feb 08, 2018 at 02:31:31PM +0500, ?? wrote:
> I install OpenBSD on my Fastwell CPB905 Singleboard compter. IT have
> 4-RS-232 port on same IRQ, but on different address on isa bus. Then i
> setup only one port using configure command all ports work normally. But
> I install OpenBSD on my Fastwell CPB905 Singleboard compter. IT have
> 4-RS-232 port on same IRQ, but on different address on isa bus. Then i
> setup only one port using configure command all ports work normally. But
> when i setup 2 of them in one boot configuration i get in dmesg: irq
> already
I install OpenBSD on my Fastwell CPB905 Singleboard compter. IT have
4-RS-232 port on same IRQ, but on different address on isa bus. Then i
setup only one port using configure command all ports work normally. But
when i setup 2 of them in one boot configuration i get in dmesg: irq
already in use. I
7 matches
Mail list logo
