Stuart Henderson wrote:
--On 29 September 2005 20:54 -0700, Richard P. Koett wrote:
This machine has two interfaces - 'ne3' facing the Internet and 'rl0'
facing a small (3 computer) internal network. I am *assuming* that
the log entries pertain to the external interface but tcpdump is not
Hi..
Why not make release(8) from another box without aac, compile aac-support
into the kernel and install from that snapshot?
cu
JRL
PS: Sorry for sending from gmx, i'm not at home ATM.
--- Urspr|ngliche Nachricht ---
Von: eric [EMAIL PROTECTED]
An: misc@openbsd.org
Betreff: 3.6 - 3.7
Talmage wrote:
I'm planning on implementing a OpenBSD all-in-one router/firewall/
PPPoE_client/VPN_server and have been having issues getting the in-
kernel PPPoE to work which is the first thing I'm working on. I've
checked the pppoe(4) manpages but still haven't been able to get it
From: Henning Brauer [EMAIL PROTECTED]
* Daniel Ouellet [EMAIL PROTECTED] [2005-09-29 22:20]:
I was looking at the HP DL-145 G2 with SCSI on them and I also saw the
new Sun X4100.
Looking at the less then complete technical information on the Sun
server, I don't see the details of the chip set
Claudio Jeker wrote:
On Thu, Sep 29, 2005 at 02:39:15AM +0200, per engelbrecht wrote:
per engelbrecht wrote:
Stuart Henderson wrote:
How much RAM might I want in order to accept full views from 2-3 peers?
Thanks.
Running 3 peers, full table (170.097 prefixes) uses 317MB ram all
Hi
I have been trying to setup a brother HL-1430 printer on OpenBSD 3.7 but
has been told it is near impossible.
I have installed cups but I am not sure if it is better to use it.
I can locate the printer on /dev/lpt0 and it's in dmesg.
From that and getting some actually printing done, I
I have been through the FAQS and manuals trying to configureload
balancing on my 4 DSL connections. The connections are all same from the
same ISP, each connection terminates into a ADSL router, which gets the
IP from the ISP server, the ADSL routers have the following internal
addresses
1.
The last time i had to use a non-postscript printer with OpenBSD i used
foomatic. Since i was not familiar with the software, it was a bit of a
pain to set up. But like most other software on OpenBSD, once i had it
configured properly it worked without any problems. Just curious, why
don't you
On Fri, 30 Sep 2005 18:35:16 +0530, Manpreet Singh Nehra
[EMAIL PROTECTED] wrote:
DHCP | | 172.31.1.1
|
On Fri, Sep 30, 2005 at 03:53:48PM +0200, Rico wrote:
Hi
I am trying to get java working on mozilla-firefox on obsd37.
I have installed the jdk1.4 from ports and the installation went well. I
have created the symbolic link from libjavaplugin_oji.so to
/home/user/.mozilla/plugins
On Thu, 29 Sep 2005, Richard P. Koett wrote:
What is the accepted thing to do if one posts a question
and gets no response after a few days?
Should one...
a) Politely ask again?
b) Rephrase the question?
c) Assume nobody wants to answer so stop asking?
d) Assume you haven't done you
Henning Brauer wrote:
I am more curious about the 2100 actually. Finally a vendor got it and
made a (apparently) decent single-CPU amd64 1U machine with a reasonable
price tag. I am uncertain what chipset they use, might be nForce, might
I like the 2100 better, but was looking at the 4100
Hi,
I'm trying to use a small older pc (75MHz first generation Pentium 64MB ram
3 GB of disk) as a webserver/fileserver using OBSD 3.6. I'm OK to install
the patches but some of them require to rebuild the kernel which I suspect
could take forever on this pc (haven't tried it though) and eats up
Try using this:
/etc/login.conf
default:\
:datasize-max=512M:\
:datasize-cur=384M:\
:stacksize-cur=8M:\
...
On Fri, Sep 30, 2005 at 03:53:48PM +0200, Rico wrote:
* Hi
*
* I am trying to get java working on mozilla-firefox on obsd37.
*
* I have installed the jdk1.4 from
Do you have a faster pc running OpenBSD? In that case you can also do a make
release and upgrade that old pc.
Cheers,
Jasper
On Fri, 30 Sep 2005 07:55:49 -0700
Ami Emanuel Bizamcher [EMAIL PROTECTED] wrote:
why are you using openbsd version 3.6 and not 3.7 ?
-- amix
On 9/30/05, Frederic
On 9/29/05, Chad M Stewart [EMAIL PROTECTED] wrote:
While not at all supported and could break things I have done in the
past
## CLAMAV on OpenBSD
cd /usr
[EMAIL PROTECTED]:/cvs cvs get \
-rHEAD -Pports/security/clamav
then go make a package and assuming that works, install it. YMMV
L. V. Lammert wrote:
On Thu, 29 Sep 2005, Richard P. Koett wrote:
What is the accepted thing to do if one posts a question
and gets no response after a few days?
Should one...
a) Politely ask again?
b) Rephrase the question?
c) Assume nobody wants to answer so stop asking?
d)
I can confirm this behaviour. But, I can still mount
and use the partition. I'm using 3.7.
What I get is:
1) say /mnt/ms/ directory contains 1, 2, 3 directories
with a bunch of stuff in them.
2) cd /mnt/ms/; mkdir 4; mv * 4
3) cd 4
4) ls and 1, 2, 3 gets listed.
But, if I cd into any of
I'm running OpenBSD 3.7-STABLE. I'm trying to find an updated package:
squid-2.5.STABLE11-transparent.tgz
I checked /pub/OpenBSD/3.7/packages/i386 of a few FTP servers and only
found squid-2.5.STABLE11.tgz.
I noticed that squid-2.5.STABLE11-transparent.tgz is available for 3.6,
but not 3.7.
When using ATA drives, I have to make a choice between write caching or soft
updates, since write caching with soft updates creates an unsafe situation.
I assume by 'write caching' you mean async.
No. You have that wrong.
async is always unsafe.
Everything else you say says that you
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of
Theo de Raadt
Sent: Friday, September 30, 2005 2:51 PM
To: Michael Favinsky
Cc: 'misc@openbsd.org'
Subject: Re: ATA Soft Updates or Write Caching
When using ATA drives, I have to make a choice
On Fri, Sep 30, 2005 at 11:35:42AM -0700, Joe S wrote:
Where can I find more information about security updates for packages,
other than checking the FTP server?
http://www.openbsd.org/pkg-stable.html
--
Ubi non accusator, ibi non judex.
(Where there is no police, there is no speed limit.)
On Fri, Sep 30, 2005 at 12:51:21PM -0600, Theo de Raadt wrote:
When using ATA drives, I have to make a choice between write caching or soft
updates, since write caching with soft updates creates an unsafe situation.
I assume by 'write caching' you mean async.
No. I think he meant caching
On Fri, Sep 30, 2005 at 09:39:42PM +0200, Matthias Kilian wrote:
I assume by 'write caching' you mean async.
No. I think he meant caching by the disk device (see the note about
atactl writecachedisable).
I forgot:
And thus may be as (or even more) worse as async.
But then I'm a
On Fri, Sep 30, 2005 at 09:39:42PM +0200, Matthias Kilian wrote:
I assume by 'write caching' you mean async.
No. I think he meant caching by the disk device (see the note about
atactl writecachedisable).
I forgot:
And thus may be as (or even more) worse as async.
But then
Hi
Paulo Manoel Mafra wrote:
Try using this:
/etc/login.conf
default:\
:datasize-max=512M:\
:datasize-cur=384M:\
:stacksize-cur=8M:\
I tried that but it didn't change anything, firefox is still crashing.
Cheers,
Rico.
Hi
steven mestdagh wrote:
yes, your resource limits are probably not high enough. change them with
'ulimit -d' or something similar. my java_vm here is using about 200M
of memory, which is higher than the default limit in 3.7.
It is actually set to unlimited.
Cheers,
Rico.
On Thu, 29 Sep 2005 14:23:06 +0200
[EMAIL PROTECTED] wrote:
Quoting Haluk Durmus [EMAIL PROTECTED]:
Hello
I love openbsd but after the display of my openbsd-laptop
was broken a bought a new Laptop hp nc6120.
I can't boot openbsd wit 3.7 boot cd and snapshot 3.8 boot cd.
I'm very
On Fri, Sep 30, 2005 at 10:37:43PM +0200, Rico wrote:
...I tried that but it didn't change anything, firefox is still crashing.
I don't recall you mentioning whether ff dropped a .core file when it
crashed. You might consider running firefox from a shell, and if it
won't drop a .core file into
Hello,
On 9/30/05, Joe S [EMAIL PROTECTED] wrote:
I'm running OpenBSD 3.7-STABLE. I'm trying to find an
updated package:
squid-2.5.STABLE11-transparent.tgz
Note that the transparent proxy build is a port flavor, so you could
readily use that.
Best regards,
Carlos.
Hi all,
I've just got a problem with my DSL modem which worked fine for more
than a yeah. It stopped responding, to ping etc.
Firstly it was:
azazel ~ # ping 80.53.109.249
PING 80.53.109.249 (80.53.109.249): 56 data bytes
ping: sendto: No buffer space available
ping: wrote 80.53.109.249 64
I have a situation where I need to connect an OpenBSD box to a MS Windows
PPTP server (yep, I know it is not secure, but in this case I have no choice
in the matter).
After looking around the net I found myself at
http://pptpclient.sourceforge.net/. So I downloaded, complied and installed
the
Just wanted to know what people currently use for an usb printer under
OpenBSD. I'm looking for rather cheap hardware that's currently sold
in europe as brand new, and guaranteed to work (through experience)
by people...
I noticed that squid-2.5.STABLE11-transparent.tgz is available for 3.6,
but not 3.7. When can we expect a new package?
env FLAVOR=transparent make install
After examining the tcpdump log, I came to the conclusion that the PXE
firmware embedded in the Intel network card was too old to be trusted
as reliable. For the archives then, the command I used to capture
packets with tcpdump was:
tcpdump -i fxp0 -n -vvv -XX tftpbootlog.txt
After updating the
vendredi, le 30 septembre, 2005, Peter Bako nous a dit ceci:
I have a situation where I need to connect an OpenBSD box to a MS Windows
PPTP server (yep, I know it is not secure, but in this case I have no choice
in the matter).
After looking around the net I found myself at
Jasper Lievisse Adriaanse wrote:
Do you have a faster pc running OpenBSD? In that case you can also do a make
release and upgrade that old pc.
.. and also check out binpatch project (google).
--
.: Jakub GEazik
.: zytek(at)ostrow-wlkp.net
.: jid:zytek(at)azazel.ostrow-wlkp.net
On 30/09/2005, at 6:58 PM, David Gwynne wrote:
From: Henning Brauer [EMAIL PROTECTED]
* Daniel Ouellet [EMAIL PROTECTED] [2005-09-29 22:20]:
afaik the 4100 and 4200 use the slightly aged AMD chipset, same thing
as in the HP DL145 G1, the V20z, and the IBM - should just work.
True, that
Daniel A. Ramaley wrote:
The last time i had to use a non-postscript printer with OpenBSD i used
foomatic. Since i was not familiar with the software, it was a bit of a
pain to set up. But like most other software on OpenBSD, once i had it
configured properly it worked without any problems.
Hi Josh
Josh Grosse wrote:
I don't recall you mentioning whether ff dropped a .core file when it
crashed. You might consider running firefox from a shell, and if it
won't drop a .core file into your working directory, running ff from within
gdb.
Running firefox from the shell gives me this:
What sonicwall firmware version?
I have a spare sonicwall that I could use to try and mirror your configuration
and see if it works for me.
I'd have to wait until I get in to work on Monday.
-Original Message-
From: [EMAIL PROTECTED] on behalf of Trepliev
Sent: Fri 9/30/2005 8:57 PM
To:
Michael Favinsky wrote:
I understand async is always unsafe. I don't mean async. I don't use async.
I mean the hardware write cache built into the ATA drives. I read somewhere
Funny...I've read lots of things that proved to be wrong.
Wrote a few things, too. ;)
that, unlike SCSI drives, the
On 01/10/2005, at 10:04 AM, Sam Vaughan wrote:
On 30/09/2005, at 6:58 PM, David Gwynne wrote:
However, the onboard storage controller probably wont work out of
the box right now. It's a SAS variant of the chips supported by
the mpt driver. According to marco it isn't as trivial as adding
43 matches
Mail list logo
