Hi,
There is a course on intellectual property by the World Intellectual
Property Organisation (WIPO). This course is free. After studying this
course one will be able to know more about copyrights, patents,
trademarks, Geographical Indications etc.
In case you complete the course successfully
On Mon, 30 Jul 2007 14:23:54 +0530
Siju George [EMAIL PROTECTED] wrote:
Hi,
There is a course on intellectual property by the World Intellectual
Property Organisation (WIPO). This course is free. After studying this
course one will be able to know more about copyrights, patents,
On Mon, Jul 30, 2007 at 12:55:59PM +0200, Jona Joachim wrote:
On Mon, 30 Jul 2007 14:23:54 +0530
Siju George [EMAIL PROTECTED] wrote:
Hi,
There is a course on intellectual property by the World Intellectual
Property Organisation (WIPO). This course is free. After studying this
On 7/30/07, Nickolay A. Burkov [EMAIL PROTECTED] wrote:
Pretty funny :)
Yeah, especially in openbsd mailing list ;)
Sorry About that :-(
Qemu works well on OpenBSD though ;-)
Use an evaluation version of XP if you can get one :-)
I just posted this because this happen to be a list aht has a
Hi,
As far as I undrestand you are trying to limit the amount of firewall rules,
that means you won't have to write a specific outbound rule.
As far as I undrestood from the kernel source glimpse the - and - in
pfctl -ss mean PF_IN and PF_OUT. So although you have not limited the rules
to a
Heinrich Rebehn wrote:
Hello list,
after using ipsec for some years now, i never experienced an upgrade
breaking it. But after after moving to 4.1 (new install) i can not get
it to work anymore. I have copied the complete /etc/isakmpd directory
from the 4.0 installation to the new one and
I've got a TI PCI7XX1 based card reader and an MMC card, which was
formatted by and used in Nokia 7710 phone.
When I insert a card I get following messages to dmesg:
sd1 at scsibus2 targ 1 lun 0: SD/MMC, Drive #01, SCSI2 0/direct fixed
sd1: 490MB, 490 cyl, 64 head, 32 sec, 512 bytes/sec, 1003520
When starting symux (installed from packages), I run out of semaphores (see
output below).
I searched the archives, and found a post from Marco Pfatschbacher that
included a patch to symon that reduced SYMUX_SHARESLOTS from 20 to 3.
I'm curious as why am I running out of semaphores--don't I
On Mon, Jul 30, 2007 at 07:59:19PM +0400, Dmitrij Czarkoff wrote:
I've got a TI PCI7XX1 based card reader and an MMC card, which was
formatted by and used in Nokia 7710 phone.
When I insert a card I get following messages to dmesg:
sd1 at scsibus2 targ 1 lun 0: SD/MMC, Drive #01, SCSI2
On 7/30/07, Uwe Stuehler [EMAIL PROTECTED] wrote:
If you don't care about the data you could reformat the card using
disklabel and newfs!? Or you could use dd on /dev/sd0c to create a backup,
or look at the data with hexdump.
The matter of fact is that I need this card to be malformatted,
On 7/30/07, Uwe Stuehler [EMAIL PROTECTED] wrote:
Or you could use dd on /dev/sd0c to create a backup, or look at the data with
hexdump.
Meanwhile:
sudo dd if=/dev/sd1c | bzip2 -9 ~/nokia-mmc.img.bz2
dd: /dev/sd1c: Input/output error
0+0 records in
0+0 records out
0 bytes transferred in 0.998
I am wondering if anyone could help with this problem. I was not able to
get any help on the roundcube lists, unfortunately and search engines
were not that useful either.
I installed roundcube mail on an OpenBSD 4.1 mail server that runs
dovecot and openldap and hastymail. httpd is not
I have a Tyan S2881 Thunder K8SR motherboard (Opteron), and wd0 is a
SATA hard disk (Western Digital), but I want to boot and run off a
flash card.
I have an Addonics SATA to CF adaptor, Model ADSACF)
http://www.addonics.com/products/flash_memory_reader/adsacf.asp
The OpenBSD 4.1 installer
On Mon, Jul 30, 2007 at 08:38:31PM +0400, Dmitrij Czarkoff wrote:
On 7/30/07, Uwe Stuehler [EMAIL PROTECTED] wrote:
If you don't care about the data you could reformat the card using
disklabel and newfs!? Or you could use dd on /dev/sd0c to create a backup,
or look at the data with
On Mon, Jul 30, 2007 at 09:06:22PM +0400, Dmitrij Czarkoff wrote:
On 7/30/07, Uwe Stuehler [EMAIL PROTECTED] wrote:
Or you could use dd on /dev/sd0c to create a backup, or look at the data
with
hexdump.
Meanwhile:
sudo dd if=/dev/sd1c | bzip2 -9 ~/nokia-mmc.img.bz2
dd: /dev/sd1c:
On 7/30/07, Vijay Sankar [EMAIL PROTECTED] wrote:
snip
Not Found
The requested URL /rc/ was not found on this server.
snip
The /var/www/logs/error_log shows
[Mon Jul 30 13:53:44 2007] [error] [client 10.10.10.65] File does not
exist: /var/www/htdocs/rc//
Never used roundcube is it a php
On 7/30/07, Bryan Irvine wrote:
Never used roundcube is it a php app?
Can you browse to http://yourserver/rc/ and see something?
Thanks very much for your reply.
Yes, it is a PHP application (but so is Hastymail which runs fine on my
OpenBSD installation against the same IMAP server, with
First of all, a fine point of English:
How to should be followed by an explanation of how to do something,
not a question, 'specially if not followed by a question mark. The
phrase you are probably looking for is how do I . . . ?.
(yes, strange thing for me, who has mangled English in many a
Nick Holland wrote:
...
2) I see the thing is picking up as a DMA mode 2 device. I've not
seen that with the CF devices and adapters I've used...might want to
try disabling the DMA on that device. man 4 wd
3) Try another OS on your adapter/MoBo combo. You may find your CF
adapter and CF
On 7/30/07, Vijay Sankar [EMAIL PROTECTED] wrote:
I am wondering if anyone could help with this problem. I was not able to
get any help on the roundcube lists, unfortunately and search engines
were not that useful either.
I installed roundcube mail on an OpenBSD 4.1 mail server that runs
(Informacisn sobre la lista de envmos incluyendo instrucciones para la
anulacisn figuran al final de este mensaje.)
__
Hemos desarrollado por vez primera un difusor terapiutico ambiental que permite
el uso de medicinas de venta libre. Deseariamos nos autorice a enviarle mayores
detalles por
On 7/30/07, Allen wrote:
I seem to recall seeing this error, too. It has been quite a while
since I debugged it, but I seem to ever-so-vaguely remember it being
an issue in php.ini with having to set:
magic_quotes_gpc = On
fwiw: I also have magic_quotes_runtime = Off, and roundcube works
First let me say that I have Roundcube running on OBSD 4.1 stable.
My web server is lighttpd BUT I ran it on Apache chrooted and unchrooted.
So...on to your issues. In OpenBSD I recommend starting off with the
recommended php.ini which can be found here:
On 7/31/07, Uwe Stuehler [EMAIL PROTECTED] wrote:
By such, I presume you mean the format, not that the card is special?
Yes, that's right.
In that case you could do mount -t msdos /dev/sd1c /mnt (or without -t).
I tried to, but got I/O error.
On 7/31/07, Uwe Stuehler [EMAIL PROTECTED] wrote:
hey there, -I messed with this alot in 3.0 when it came out and think I
was the first person to ask Dan about it when testing was going on for
3.0 snapshot. I mean, I lived to wake up and make bridges with pf.
-but, alas, that was years ago, and from my hazy memory all I used to do
was this:
25 matches
Mail list logo
