Hey Steven & all,
On Fri, 2003-05-30 at 07:03, Steven M. Schultz wrote:
> Here is a patch to fix the problem - it seems that -O6 is too high
> and causes the module to be miscompiled somehow. Changing that to
> -O2 fixes the problem:
Hm, even though -O>=4 doesn't guarantee to
Hi -
If you're using gcc 3.3 (as SuSE 8.2 does) and the building
of the jpeg-mmx library fails with:
gcc -O6 -I. -c -o jdapimin.o jdapimin.c
/tmp/cc7IfzBn.s: Assembler messages:
/tmp/cc7IfzBn.s:619: Error: symbol `NOT_SUPPORTED' is already defined
gmake: *** [jdapimin.o] Error
> From: [EMAIL PROTECTED]
> As the ambient light drops, my mostly automatic camera first reduces
> the shutter speed and opens the aperture (I think), and then starts to
> crank up the CCD gain. But I think it might be doing more than that,
> because while the luma just gets noisy, the chroma get
Hey Ignacio,
On Thu, 2003-05-29 at 20:33, jivr wrote:
> I have a ELSA Winner II with video-capture. The chip is VPX3225D.
> The manufacturer don't support Linux
>
> Works with a unified zoran driver?
Probably not. The Unified Zoran driver works with hardware MJPEG codec
cards.
Ronald
--
Ronal
On Thu, 29 May 2003, Stuart Hodges wrote:
> Hi,
>
> yuvfps reports:
> cat stream.yuv | yuvfps -v2 > debout
>INFO: [yuvfps] yuv2fps (version 0.1) is a general frame resampling utility
> for yuv streams
>INFO: [yuvfps] (C) 2002 Alfonso Garcia-Patino Barbolani
> <[EMAIL PROTECTED]>
>
Hello,my name is Ignacio. I'm spanish. Excuse my english.
I have a ELSA Winner II with video-capture. The chip is VPX3225D.
The manufacturer don't support Linux
Works with a unified zoran driver?
I'm a beginner in Linux. Would you explain, step by step, how to
configure / install?
Thanks.
-
>Is there an existing utility out there that can provide a delay
>between the luma and chroma channels? My camcorder produces video
>with the chroma lagging the luma, with the amount of lag dependent
>(for reasons unknown to me) on the light level. It's really
Can yuvdenoise cope with an interlaced source (VHS tape) and keep it
interlaced. Only it says:
"and then into the filter. (Well, the other way would work, too,
except that the filter doesn't do interlaced MC yet and doesn't do a
good job on interlaced
I toggled the progressive sequence bit to zero on every system header
and the resulting stream now plays correctly with mplayer! Haven't yet
checked on the Poineer standalone.
Has anyone seen this? I believe dvd is not supposed to be marked as
progressiv
> From: Alan Murrell <[EMAIL PROTECTED]>
>
> And we have success! When I run
> 'lav2divx', I get no segmentation fault. Oh, and I
Hurrah!
> Thanks for your hand-holding! :-)
Now that wasn't all that difficult was it? :-)
Cheers,
Steven Schultz
-
Hi -
> From: Al Bogner <[EMAIL PROTECTED]>
>
> I use SuSE 8.2 and tried to install jpeg-mmx-0.1.4
> What does the error below mean?
> gcc -O6 -I. -c -o jdapimin.o jdapimin.c
> /tmp/cc95DzIH.s: Assembler messages:
> /tmp/cc95DzIH.s:619: Error: symbol `NOT_SUPPORTED' is already
> defined
> mak
>I've done a little test with yuvscaler and y4mscaler. The input is a
...
>It seems there is some bad effects with cubicCR, cubic, sinc4hann,
>sinc4lan and sinc8lan (look at scaler-vcd-2.png).
>
>Any additional comments ?
I found the problem, and it will be fixed in a new release in the nex
I use SuSE 8.2 and tried to install jpeg-mmx-0.1.4
What does the error below mean?
jpeg-mmx-0.1.4 # ./configure
checking for gcc... gcc
checking whether the C compiler (gcc ) works... yes
checking whether the C compiler (gcc ) is a cross-compiler... no
checking whether we are using GNU C... yes
>Is there an existing utility out there that can provide a delay
>between the luma and chroma channels? My camcorder produces video
>with the chroma lagging the luma, with the amount of lag dependent
>(for reasons unknown to me) on the light level. It's really only a
>problem in low light,
Hiya,
> yuvfps reports:
>cat stream.yuv | yuvfps -v2 > debout
> INFO: [yuvfps] yuv2fps (version 0.1) is a general frame resampling utility
>for yuv streams
> INFO: [yuvfps] (C) 2002 Alfonso Garcia-Patino Barbolani
><[EMAIL PROTECTED]>
> INFO: [yuvfps] yuv2fps -h for help, or m
Hey Tim,
On Tue, 2003-05-27 at 23:25, [EMAIL PROTECTED] wrote:
> Looking through the archives I seen people have come across VM
> related Redhat 9 compilation errors before. Is there any way these could
> be fixed? Could the driver be told the kernel version is 2.5? I gave up
> running custom c
All information is in the attached file.
17 matches
Mail list logo
