I just noticed the following appeared in /var/log/messages at 15:32:59
then the ringbuffer errors appear immediatly after this
Jan 1 15:32:59 nelson kernel: [ cut here ]
Jan 1 15:32:59 nelson kernel: kernel BUG at lib/radix-tree.c:276!
Jan 1 15:32:59 nelson kernel:
Hey,
In the past couple of days mythtv-frontend-0.18.1-116.rhfc4.at has
locked up on me 3 or 4 times during playback of recorded shows.
This is the first time I have seen this behaviour and each time I was
attempting to playback recorded movies at least 2 hours in length.. The
shows were recor
Jim Duda wrote:
Does anyone have any ideas which might explain the flicker? I
realize that "flicker" is hard to describe.
When you say flicker, do you mean the playback stutters or pauses?
The playback doesn't stutter or pause. What I see are white lines
shooting across the image. The li
Jim Duda wrote:
I have a box which I use to run freevo. Fedora-core 4 running a
2.6.14 kernel. Freevo works fine. I've been playing with Mythtv
because it's so sexy looking and I'm thinking about switching. I'm
using the SIS driver (sis_drv.o).
When I play videos from freevo, using mplay
Well, for starters you should be worried about your wallet
and how you are going to fit 512 GB of memory on that
mobo...
/smirk ...
That was really funny.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/
time,
any channel. That's exactly what it did. :)
On Dec 21, 2005, at 10:32 PM, Allan McIntosh wrote:
Hey,
I have a record schedule for new episodes of the series House, which
is set to record at any time on any channel.
There is a movie on the IFC called House that I believe fa
Hey,
I have a record schedule for new episodes of the series House, which is
set to record at any time on any channel.
There is a movie on the IFC called House that I believe falsely falls
under this record schedule.
___
mythtv-users mailing list
Actually, when I looked at the code I realized a -DNEW_LIB_EXIF=1 would
force the use of the newer libexif.
So the fix:
mythplugins]$ ./configure --enable-all --enable-exif
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-
Would someone that can successfully build the current
release-0-18-fixes svn tell me what version of
libexif they have installed?
I build it with libexif 0.5.12.
Cool thanks. I am using FC4 and 0.5.12 is the version in atrpms.
However, I ended up with a newer version from release reposi
Would someone that can successfully build the current
release-0-18-fixes svn tell me what version of
libexif they have installed?
Thanks.
Allan McIntosh wrote:
Is there some where I can check on current svn dependency version
requirements?
I have the following rpm installed which results
Is there some where I can check on current svn dependency version
requirements?
I have the following rpm installed which results in the error below:
libexif-devel i386 0.6.12-3 release
make[2]: Entering directory
`/home/al/src/mythplugins/mythgallery/mythgallery'
g++ -c -pipe -Wall -W -O3 -m
Im running on 2 Gigs of dual channel memory so don't think that's the
problem ;) will watch the list for a good time to recompile from svn :-)
I also have a considerable amount of ram and disk space on my myth only
system and see similar similar behaviour.
My mythbackend system became
A few responses place inline
I see. This is an entirely different topic than your first post
even hints at. You're not getting 3 episodes per day for "Grey's
Anatomy" are you?
I agree, the Simpson's situation was different from the Grey's Anatomy
but it only became apparent through our
I have a satallite (ExpressVu) which offers many channels in many
time zones too choose from when recording. For example, typically I
record Grey's Anatomy every sunday at 7pm using "Record this program
in this time slot every week."
Why? To what end? Record anytime on any channel and
Hey,
I have a satallite (ExpressVu) which offers many channels in many
time zones too choose from when recording. For example, typically I
record Grey's Anatomy every sunday at 7pm using "Record this program in
this time slot every week." This way we may watch it earlier than 10pm.
Toni
I am using myth 0.18.1.20050523-1 with ivtv 4.0.
Pretty much every recording contains flashes of
what appear to be out of sync frames scattered
through out the recording. S annoying.
Here is a 4sec snippet of a recording, there is flash at 3sec mark.
http://allanmcintosh.com/pics/tmp/flas
When the card is encoding and I am watching a recording the remote
can be very slow.
I should also add, that mythcomflag would be running also. I like it to
run as soon as the recording starts.
___
mythtv-users mailing list
mythtv-users@mythtv
Wa gwan,
I am using hauppauge pvr250 with myth 0.18.1 with lircd 0.7.2. I
find at times I have to press the buttons several times, press up/down
buttons for several seconds before mythfrontend responds. Does anyone
else notice a change in lirc response when the system is under even a
mode
There's also possibly a need for a setup screen to enable people to properly set their
TV's brightness/contrast controls (or TV output).. This would include signals like
PLUGE (for correct brightness & contrast) & colour bars (for correct colour
temperature/saturation). This would be very si
Can any one suggest a way to move projected image down on TV-Out for
playback of recordings and videos?
I think the crop/zoom/displace stuff in Myth only applies to what
portion of the recording Myth will play, not where on the TV it will be
played. To move the actual output around on
Hey,
Can any one suggest a way to move projected image down on TV-Out for
playback of recordings and videos?
I am using nvidia driver with my FX5200 TV-Out. I have raised the
OverScan value of the Nvidia driver in xorg.conf and
~/.nvidia-settings-rc. I still have about a 1.5 - 2.0 cm strip
shopping for a GeFroce fx 4000 card. The only one I found
was pci based. But, for $18.00 more the had a fx 5200 agp with 256 meg
of ram with TV and DVI out.
Will this work as good/easy as the 4000 card? I haven't opened the box
yet, just in case the list says it won't work!
David
-
What type of input are you using for cable in? Coax, S-Video, Composite?
I have often been amazed with the increase in picture quality after
replacing a cheap coaxial cable, or the difference from .
I now use a short, direct unshared input (S-Video) straight in from the
receiver.
Are you sta
_
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
--
Allan McIntosh
Software Designer
Atreus Systems, Inc.
613-233-1741 ext: 217 (Office)
613-233-8204 (Fax)
pause
2005-10-11 21:27:33.311 prebuffering pause
2005-10-11 21:27:38.243 prebuffering pause
2005-10-11 21:27:39.610 prebuffering pause
2005-10-11 21:27:41.937 prebuffering pause
-Phil
On 10/11/05, *Allan Mcintosh* <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
Hey,
Can anyone suggest an application or procedure to fine tune picture
quality. IE Adjusting brightness, contrast color's and so forth? I am
unable to do this manually.
Are there any linux apps to do this? Something similar to Avia.
Thanks
___
I was seeing buffer prepause when attempting live tv playback. It would
pause if mythbackend was started using
/etc/init.d/mythbackend init script. It looks as though there's an issue
when started via 'su' .
so I created an alias in ~/.bashrc
alias mythbackend='mythbackend -v channel,record
Depends on what capture cards you want to use with it. The ivtv
capture cards has
(historically) had some problems with via chipsets. But then again,
my EPIA (via)
backend now runs several months non-stop until it crashes on the ivtv
driver.
I will be using the ivtv with pvr-250. I
I have
Nvidia GeForce FX5200 TV-Out card
Hauppauge pvr250
I was looking at either of the following combinations:
AMD Sempron 2500+ 64 + MSI K8N NEO-V
Or
AMD Sempron 2500+ 64 + ASUS K8V-X-SE
Any specific's to avoid?
I was looking through the PVR Hardware database but there is no
motherboar
set size
Sep 5 12:16:45 nelson kernel: saa7115: decoder disable output
Sep 5 12:16:45 nelson kernel: saa7115: decoder enable output
Allan Mcintosh wrote:
My backend is a VIA KT266A motherboard (Epox 8KHA+, to be exact) and an
AMD Athlon XP 1600+. I've got a fairly large fan/hea
ivtv: In case of problems please include
the debug info
Sep 5 12:26:15 nelson kernel: ivtv: between the START INIT IVTV and END
INIT IVTV lines when
Allan Mcintosh wrote:
My backend is a VIA KT266A motherboard (Epox 8KHA+, to be exact) and an
AMD Athlon XP 1600+. I've go
My backend is a VIA KT266A motherboard (Epox 8KHA+, to be exact) and an
AMD Athlon XP 1600+. I've got a fairly large fan/heatsink combo, as
well as a 120mm exhaust fan right next to the CPU. I didn't want to go
with the VIA motherboard, since I have had and heard of problems with
VIA and Linux
32 matches
Mail list logo
