Yeah I’ve done this.
My audio device is ALSA: IEC958, and my
iec958 mode is PCM. Works fine if I enable the “AC3 Pass Thru TV Setting”,
only messed up thing is no mixer (use receivers volume controls).
For this I use my standard onboard audio
chipset “Via 8237”. I do this with two H
I have 1.5tb in 300gb drives in a Raid 5 configuration. This is my MythTV
video directory. My record for simultaneous recordings was 5 (1xfoot ball
game, 1xSG1,1xSimpsons,1xSouth Park, and 1xMovie). All recordings were fine,
spread among 2xPVR 250's, 2xHD3000's, and 1xMercury TV Tuner.
I suspect y
This may be totally out of wack - but it might help.
Steps:
1) Delete your /lib/modules/ directory - reinstall kernel
modules "make modules_install".
2) Reinstall ivtv "make install" during the install it will tell you if you
module conflicts - and tell you how to resolve them. You may need to in
This is a focus issue with your window managerbasically if mythfrontend
doesn't have focus when you access a menu you can't navigate it properly.
If you play around with the focus settings in your Window Manager(in KDE its
in KDE Control Center), you can usually make the problem disappear.
Th
I’ve been running MythTV for a little over 2 years,
during that time, I’ve performed extensive upgrades/maintenance tweaking
everything to work exactly the way I want. I’m going to avoid geeking out
and listing specs, but suffice it to say it’s a VERY powerful setup,
spread across two front
"alsa:default" will work if you type it into the output device field.
It is not available in the drop down.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jim Duda
Sent: Thursday, December 29, 2005 6:17 PM
To: Jeff Simpson
Cc: Discussion about myt
Be sure to use the DVB drivers, and to set the HD3000 to DVB Adapter (not
HD3000) in mythsetup. Scan for channels should be available after that.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike
Sent: Thursday, December 29, 2005 1:36 AM
To: myth
I had a similar issue with certain shows –
I corrected the problem by tuning my antenna a little tighter and upgrading the
booster.
FYI – I’m assuming your
referring to HDTV playback given your earlier post about 720P playback.
David
From:
[EMAIL PROTECTED] [mailto:[EMAI
Hi Norm,
Like yourself I have both a Rogers Digital TV Box, Rogers Analog (channels
1-80 or so), and recently Rogers Digital over QAM 256.
With a HD3000 you can receive about 40 or so Digital TV stations that are
transmitted unencrypted. I do this to receive channels 102 through about 130
or so,
And an LCD panel driven by LCDd.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Joseph A. Caputo
Sent: Tuesday, December 20, 2005 12:43 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] Current time of day?
On Tuesday 20 December
Funny - tried it and had TERRIBLE playback (Jittery playback). Not using
XVMC, just XV on a AMD64 with 5700.interested to see if anyone else
tried it?
For now - I've moved back to the 7676 build (which works flawlessly on my
setup).
David
-Original Message-
From: [EMAIL PROTECTED]
[m
Hm, I'm running ivtv 0.4 with MythTV 18.1R2 (Gentoo ebuild) and
2xPVR 250's on one of my backends.
Absolutely ZERO playback issues.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Sunday, December 04, 2005 10:38 PM
T
The WinTV PVR USB2 is now working under linux (well for me).
Its from Haupaugge, the makers of the WinTV PVR series (150/250/350/500).
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kevin Kuphal
Sent: Saturday, December 03, 2005 4:55 PM
To: Discus
Linux – now what does this have to
do with MythTV?
David
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Trent Albright
Sent: Wednesday, November 30, 2005
3:24 PM
To: Discussion
about mythtv
Subject: Re: [mythtv-users] I'm
thinking of switching to windows :(
You can do this outside of MythTV.
Use amixer to switch the balance of your input (I'm assuming your tuner card
uses line-in to get audio), and tie it to a lirc command (from the remote
control).
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Petr
verlap with the HD channels. Lets see what I can find
on Ebay.
David
-Original Message-
From: Steve Adeff [mailto:[EMAIL PROTECTED]
Sent: Sunday, November 27, 2005 2:04 PM
To: mythtv-users@mythtv.org
Cc: David Ellis
Subject: Re: [mythtv-users] QAM and ATSC HDTV on the Same Card
On Sun
I have a HDTV Antenna (oriented correctly – works for
7+ channels), and a Digital QAM Provider (100% working, channels decoded).
What I’m looking to-do is potentially combine both
signals so the same HD3000 card can tune both ATSC and QAM_256 digital cable.
Are their any sort of injecto
This is normal, MythTV is retrieving you listings for a window (usually
about a week or two).
Let it finish (it will take about 10 minutes), and when your done you should
have a complete set of program guide data.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED
Do you have a /mythtv/recordings directory with sufficient disk space and
read/write priveleges (for the user running mythbackend)?
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mika Orajärvi
Sent: Thursday, November 24, 2005 1:57 PM
To: mythtv-us
trying to understand what would have changed in the kernel
from a month ago that now it is being referred to differently...
Hey, you don't learn unless you ask..:)
Jason
--
Message: 19
Date: Wed, 23 Nov 2005 23:14:17 -0500
From: &
My was actually more of a "I've been there and asked the same
question", no offense intended, I asked the same question of myself when I
did a kernel upgrade, and it's ironic to see others go thru the same thing.
I was happy to share the results of my quest, and meant no offense. Welcome
to one o
For each capture card there is a tuner
chip that actually tunes to the correct channel, and an encoder that actually
encodes the content received into MPEG or V4l raw stream (this is a beginners interpretation
but more or less correct)
In this case you have a Oren Encoder (or
more
EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Gary Manning
Sent: Wednesday, November 23, 2005 4:22 PM
To: 'Discussion about mythtv'
Subject: RE: [mythtv-users] Fusion 5 Tuning problems
On Tuesday 22 November 2005 09:16, David Ellis wrote:
> First off go into "Advanced Option
Madagascar has DRM protection (Google Search Madagascar Rip Can't).
The same google search will point you at the solution.
Ripping and other illegal activities are beyond the scope of this mailing
list.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
As you found out, using this box as any sort of MythBackend/MythFrontend is
totally out of the question. That said, you CAN use it to control your
mythfrontend.
Install any sort of OS with a Web Browser (pick one with driver support for
your screen). Then look at something called MythWifi.
David
Behalf Of Paul Andreassen
Sent: Tuesday, November 22, 2005 11:07 AM
To: Discussion about mythtv
Subject: Re: [mythtv-users] IR RX/TX that works
On Wed, 23 Nov 2005 01:45 am, David Ellis wrote:
> I use the USB-UIRT2, have for two years. Solid and works.
>
> David
http://www.usbuirt.com/
Yup
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Drew Tomlinson
Sent: Tuesday, November 22, 2005 11:07 AM
To: Discussion about mythtv
Subject: Re: [mythtv-users] Current Steps To Add HD-3000 To A Box With
PVR-250
On 11/22/2005 7:25 AM David Ellis
I use the USB-UIRT2, have for two years. Solid and works.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul Andreassen
Sent: Tuesday, November 22, 2005 10:45 AM
To: mythtv-users@mythtv.org
Subject: [mythtv-users] IR RX/TX that works
The PVR150'
Upgrade to the latest IVTV (Version 5, development branch). It uses the
kernel modules for tuner and audio (which is good).
You can keep the 2.6.13 kernel or upgrade (good new drivers).
Use the cx88-dvb driver for your HD3000. Confirmed working here.
David
-Original Message-
From: [EMAI
First off go into “Advanced Options”
on your capture card in MythTV Setup, make sure your using TS Mode (not PS).
Then, follow these steps:
1) Grab the frequency from you channels.conf (it will look like
52500).
2) Add a new row to your dtv_multiplex table with t
anks again guys,
David
-Original Message-
From: Steve Adeff [mailto:[EMAIL PROTECTED]
Sent: Sunday, November 20, 2005 8:02 PM
To: mythtv-users@mythtv.org
Cc: David Ellis
Subject: Re: [mythtv-users] Manually Entering QAM Channels?
On Sunday 20 November 2005 18:17, David Ellis wrote:
>
PC HD3000..using the DVB Drivers.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Greg Estabrooks
Sent: Sunday, November 20, 2005 6:19 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] Manually Entering QAM Channels?
> channels.conf fo
After 2 days of debugging/testing I managed to hack together
a working channels.conf for my QAM 256 Provider (Rogers in this case). They
broadcast about 15% of their channels in the clear, and I have them all.
I’m able to manually tune using azap and cat
/dev/dvb/adapter0/dvr0, so I’m c
I"m pretty sure the problem is your mixer.
Use alsamixer or kmixer to set your capture device to the line-in.
David
- Original Message -
From: "Jim Reith" <[EMAIL PROTECTED]>
To: "Discussion about mythtv"
Sent: Friday, October 28, 2005 9:25 AM
Subject: Re: [mythtv-users] PVR-350 sound
: "David Ellis" <[EMAIL PROTECTED]>
To: "Discussion about mythtv"
Sent: Wednesday, October 26, 2005 1:22 PM
Subject: Re: [mythtv-users] MyIRBlaster - Myth Issues Only??
I'm having a similiar issue with a USB connected blaster..so I'm
pretty sure its not
I'm having a similiar issue with a USB connected blaster..so I'm pretty
sure its not related to the serial line speed or configuration.
What I've noticed is it only pops up if the same blaster is used to receive
the command as send the command.
Symptoms:
1) recording is 100% reliable (tha
I have a digimatrix running briliiantly (for about a year now).
This site has it all (including how to get TV Tuner, Remote, LCD, Volume
Dial etc).
http://asusfan.linux-site.net/index.html
David
- Original Message -
From: "Peter Darley" <[EMAIL PROTECTED]>
To: "Discussion about myth
ns to "PC".
Does this help? Can you elaborate on your suggestion "try
removing..."?
Thanks
David Ellis wrote:
A few quickie questions:
You mention that it works in Windows. What resolutions does windows
run at when it runs?
Have you tried powerstrip in Windows? Powerstr
A few quickie questions:
1) You mention that it works in Windows. What resolutions does windows
run at when it runs?
2) Have you tried powerstrip in Windows? Powerstrip will give you the
modeline that your video card is running at – you can actually cut and
paste in directl
Take a look at MythWIFI.
It has a TCP/IP interface to MythTV (Frontend) and includes a PDA Interface.
http://studwww.ugent.be/~aveys/mythwifi/
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dirk Aust
Sent: Saturday, October 08, 2005 9:18 AM
To: m
I use different mappings. I actually use a custom version of my old Asus
Digimatrix remote.The nice thing with the Harmony Remote is that its
fairly easy to customize the mappings. For example, the volume controls
for my "PVR" on the remote are mapped to the Volume controls for my
surround sound sy
Use symbolic links.
ln -sf
Symbolic Links create "virtual" directories that point to other
destinations. Use the same approach for Samba, DVD, CD, or multiple
drives.
David
On 26-Sep-05, at 9:24 AM, Nick Parkinson wrote:
Hi,
A few queries about MythVideo... i.e how i could go
access m
How about you run the backend on the frontend, with no tuners defined?
D
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kai Hörner
Sent: Sunday, September 25, 2005 12:12 PM
To: mythtv-users@mythtv.org
Subject: [mythtv-users] mythfrontend only
Hello eve
Hehe - oh I'm going to get it :)
How about the "Wife" contributes to the source :)
D
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Moasat
Sent: Sunday, September 25, 2005 9:52 AM
To: 'Discussion about mythtv'
Subject: RE: [mythtv-users] Error while sta
I posted a few days ago about creating a CD Library Plug-in,
specifically for my DC-300. I’ve successfully reverse engineered the USB protocol
and have a working command line utility for changing library disks. So this got
me thinking about my proposed plug-in.
I’m creating a CD-Library
Are you running Gentoo? I had this problem with gentoo a LONG time ago,
solved it with a "emerge kde" your probably missing a library or two.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jeffrey Rogers
Sent: Saturday, September 24, 2005 10:03 PM
Change the advanced settings in MythSetup and enable "Open on Demand" (check
my spelling I haven't set it in a while). As long as you aren't watching the
tuner (or recording from the tuner) you can use any app you want.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTE
I was looking at creating a plugin for my DC-300 (also
called the Dacal CD Library II). This is a carousel style device that holds 150
CD’s/DVD’s. The device has a USB Plug that connects to the computer
to allow the computer to “eject” a specific CD/DVD.
I was wondering a few things:
1
Is the MythTV in plutohome more or less standard? Or heavily customized? How
about the asterisk? Standard or modified?
I'm running everything Pluto provides except that funky Orbiter webpad
stuff.Just from the component
packagesAsterisk/MythTV/Misterhouse.
Anyone out there using P
I could see this working in a few ways. First your going to have to find a
changer for which a linux utility set exists. Many of these players have
documentation on the serial protocol they use..which should make
controlling them fairly simple (something Like "echo command >/dev/stty0").
Once y
Double check that the directory(or mount point) used for the livetv
ringbuffer is present and has permissions accessible by the front-end. Run
mythfrontend from a X-Terminal Prompt with the -v option to see where it's
bombing. If it appears to crash give it 10 seconds or so to recover.
David
Its generally a bad idea to use multiple ir devices on a single machine.
It is possible to chain lirc (have two instances of lirc - one for receive
one for transmit) but I wasn't able to get it to stabilizeit was
also a MAJOR pain to setup.
My suggestion would be to get a IR device that r
Lower your volume level on the card setup in mythsetup.I think the
problem is with an input volume level that is too high.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Sérgio Gomes
Sent: Friday, September 02, 2005 5:00 PM
To: mythtv-users
To be honest, if all your using is MythTV - just install 32 bit - its fast
enough.
On my Athlon 3200 I run a BUNCH of stuff - most of which benefits from the
64bit enhancements. For example, my boot up takes less than 5 seconds from
Grub to Desktop - significantly less than my old Athlon XP 2500 s
I'm using a USB-UIRT2 for IR Blasting to a Scientific Atlantic 3200. it's a
pretty good device (considerably less than 99$ EUR), and works well. It has
support for 56K and 36 remotes (which I believe is all of them), and there
is a lirc patch that works for me.
You need to write a little shell scr
eoplayback - LiveTV or recordings)
Thanks David.
Had a look using the GUI and "Use XV Picture Controls" is already selected.
Are you talking about a different setting in a config file somewhere?
--- David Ellis <[EMAIL PROTECTED]> wrote:
> You need to change the setting "use xv p
You need to change the setting "use xv picture settings" in TV Settings to
true.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Andrew Codrington
Sent: Wednesday, August 24, 2005 5:47 PM
To: Discussion about mythtv
Subject: Blue faces and xvattr -a
Yeah - this little bug has been reported to Nvidia several times.I
really wish they'd get around to fixing it.
Bah,
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Todd Ignasiak
Sent: Wednesday, August 24, 2005 2:07 PM
To: mythtv-users@myth
code a show every 4 hours or so MAX, + encoding
DVDs
Thanks for the feedback so far guys!
Matthew Mousseau
AMSVans, Inc. Webmaster
[EMAIL PROTECTED]
-Original Message-
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Ellis
Sent: Wednesday, Au
A general note on 64 bit MythTV.
1) 64 Bit MythTV works with some caveats.
a. Xvmc drivers for Nvidia hardware (from Nvidia) are really bad with
current (7667) releases……..hopefully this will improve later, but
for now 64bit XVMC is spotty at best (it works every 5th or 6th
MythTV 0.18.1 will die if the signal loses lock while the backend is
accessing it. I believe this is one of the bugs currently being worked on in
the newest SVN release.
In the meantime I've found one workaround that while not 100% greatly
reduces the frequency of crashing. In mythsetup, goto the
Okay, I'm kinda tired of this sort of troll bait.
I've been running with MythTV for close to 2 years now, I don't experience
your issues (and my setup is considerably more complicated then what you
describe - believe me). The fact of the matter is to set something like this
you need to do some le
I have a wonderful working MythTV Setup, Lirc is great, TV
Capture is Great, even HDTV is great.
What I want to do is send commands to MythTV from a command
line, preferably identical commands to those by Lirc………..quick
google search didn’t reveal a solution, so I thought I’d ask here.
Your problem is with XVMC, XVMC is buggy on Athlon64 if you are using the 64
bit version of the driver. The bug has been reported to NVidia numerous
times, and we hope for a fix with the next release.
If you must use XVMC (no choice from a quality perspective), you will have
to install the 32 bit
- segfault starting liveTV
No joy. Still the same problem.
running mythfrontend with the -v all flag returns a log file ending
with "nVidiaVideoSync: Could not open device /dev/nvidia0; no such
file or directory"
On 8/20/05, David Ellis <[EMAIL PROTECTED]> wrote:
> Put -nvidia i
Your looking for xvattr. Usage can be found with man xvattr. I personally
don't need it (as I use Nvidia - which just works), but there are folks in a
number of newsgroups that report success.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dag Nygr
Turn on the "Use XV Picture Controls" in the TV Playback settings section
Settings. Once done tweak your XV Settings (outside of MythTV) so the RGB
levels are correct.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dag Nygren
Sent: Saturday, August
Put -nvidia in your USE Flags in "/etc/make.conf" and emerge mythtv again.
This will remove the NVidia support and presumably allow you to start.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Blastzone
Sent: Saturday, August 20, 2005 10:38 AM
To:
I really like the Digimatrix - the barebones can be had on ebay for about
300$ USD.
The basic Digimatrix includes the following:
- Sis based Video (support for XV) with Composite, RCA, SVHS, VGA, and DVI
out.
- Remote Control, and IR Receiver
- LCD Display (Basic - shows Time and Status - no custo
There is nothing stopping you from using the PVR-500 with 2x Digital Cable
Boxes...EXCEPT the following. Digital Cable looks REALLY nice with
SVideo cabling - the PVR-500 has only ONE Svideo input...So if your
really sweating it - get 2x150's. My advice would be to get 1x150 and
1x500..
Give the support line a call, they can fix the timings and dups for you.
I haven't had any issues, as most of equipment is pretty popular/common, but
the newsgroups are littered with people that rave about the support staff.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
Okay some background, I’m an Asterisk Geek – I run
both MythTV and Asterisk on the same (very beefy) server.
I recently configured Sphinx2 to provide voice recognition
to Asterisk. A caller gets a prompt, says the name of the person they want to
talk too, and voila it dials. Simple eleg
How about we try some simple diagnostics
1) In your BIOS do you have Plug-and-Play OS Turned on? Change the
Plug-and-Play OS option (if on - turn off, if off turn on) to see if the
Motherboard recognizes the card.
2) Look for a bios entry for "Reset PCI" - or something similarly worded,
to
Have you checked your spam list in gmail? Gmail moves suspected SPAM to its
spam folder. It probably thinks email with your email address in it is spam.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of jgmtfia Mr
Sent: Sunday, August 14, 2005 5:45 PM
You'll need to write a cron job (or something similar) to detect if your
gateway is down and update the settings table.
This is definitely not standard - but you can do it if you must.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Nicolas Mainil
thtv
Subject: Re: [mythtv-users] Wildly incorrect recording
lengths(25fpsivtv-recorded files)
On 8/14/05, David Ellis <[EMAIL PROTECTED]> wrote:
> This is most likely a corrupt recordedmarkup table (or index).
>
> Try this:
> 1) mysql -u mythtv -p
> 2) use database mythc
Setup - TV Settings - Playback - Next - Next - Next - Next
Xvmc is the 2nd option on the screen.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Andy Pflueger
Sent: Saturday, August 13, 2005 10:42 PM
To: Discussion about mythtv
Subject: Re: [mythtv
In my experience the IR Strength is plenty good on these, I've successfully
turned components on/off with a two wall bounce...
David
PS. Your right - its still cheaper than a Pronto.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Isaac Richards
Sent:
This is most likely a corrupt recordedmarkup table (or index).
Try this:
1) mysql -u mythtv -p
2) use database mythconverg;
3) repair table recordedmarkup;
4) quit
Restart and see if NEW recordings are correct (this will not correct
existing recordings).
David
-Original Message-
From: [
oren H. Burlingame
Sent: Saturday, August 13, 2005 4:23 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] Found an Awesome Remote
On 8/13/05, David Ellis <[EMAIL PROTECTED]> wrote:
>
>
>
> I just get The Logitech Harmony 880 remote - and let me say this is
AWESOME
&
[mailto:[EMAIL PROTECTED] On Behalf Of Andy Pflueger
Sent: Saturday, August 13, 2005 4:13 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] Segmentation fault starting "mythtv"
On 8/13/05, David Ellis <[EMAIL PROTECTED]> wrote:
> Rebuild mythtv (the core) without the
I just get The Logitech Harmony 880 remote – and let
me say this is AWESOME for MythTV.
Basically it’s a learning remote that you program via
your Windows or OSX Desktop. Has a nice little color LCD that lets you define “Activities”
(like watch TV, watch movie, etc). My MythTV box has n
Rebuild mythtv (the core) without the nvidia option set..this is
done as part of the configure stage when you build MythTV.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Andy Pflueger
Sent: Saturday, August 13, 2005 3:50 PM
To: Discussion
Ok then let me be clear..
The Apple Developer Release is a select release to developers. Part of the
release includes hardware (which is paid for when you join the program),
software which is designed to only run on that hardware, and a EULA that
states you will not disclose information ab
U - mythfilldatabase?
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Andy Pflueger
Sent: Friday, August 12, 2005 3:46 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] Re: Configuring MythTV on Gentoo
Here's what I'm doing...
I run "
Yeah - that's the case.
Basically the grey front of the drive isn't exposed...when the DVD/CD
tray opens the tray pushes open a folding down door. That door is smooth
(fluid bearings or hydraulics?).
You still have access to the drive, but color matching isn't a hassle.
I've used the Antec P
Or you could be lazy and buy a USB-UIRT http://www.usb-uirt.com.
Works great - there is a patch for lirc..transmits and receives.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dan Wilga
Sent: Friday, August 12, 2005 1:40 PM
To: [EMAIL PRO
Nah - I actually have two of the LC14 (one "M" and one "vanilla").
The LC14M has two standard 5 1/4" drive bays that are stealthed behind a
fluid bearing cover.
It has three 3.5" drive bays located behind the LCD and 1 located underneath
the CD Drives. These are GREAT cases. The LCD is clear and
Try two things:
1) Change OSD to blue or default
2) Disable real-time priority threads
If this solves your issue, try re-enabling your Real Time Priority Threads.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Thursday, Au
I second this - I'm running an old 5200 thru DVI to a 50" Rear Projection
Hitachi.
Picture quality is awesome - DVD Playback/TV/HDTV (via HD3000's) all is
amazing.
One word of advice - plan to use powerstrip and Windows (on another drive)
to get the timing for X right...once you do - you'll N
I'm using my IPAQ HP2215 - it's a nice little PocketPC and includes Remote
Software. The IR Transmitter is about 30 feet.
The major hassle with an IPAQ as your remote is as follows:
1) Battery Life is terrible. Think 8 hours with periodic IR use.
2) As a Remote it "Just-Feels-Wrong" - the WAF Quot
This has been reported as bug with Nvidia Cards on the AMD64 platform.
You have two options.
1) Run Linux in 32 bit mode - the xvmc drivers work in 32bit mode.
2) Pester Nvidia for a new AMD64 driver.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Change your recording profile.
Setup - TV Setup - Recording Profiles
There are 4 profiles:
Default
Low
Live
High
You are able to choose the recording profile used to make the recording when
you schedule it. Tweak the Size 720x480 is nice, and Quality - Your recorded
picture quality will improve.
I've been a Myth user for about a year - I've got a wonderful setup
that I'm extremely happy with. It includes (for those interested) 6
different tuners (some HDTV, some ivtv, some saa7134) SPDIF Audio, 2
terrabytes of diskspace, 2xfrontends, 2xbackends - the list goes on.
I'm looking to ad
I'm not familiar with the Chaintech AV710 - but I'm assuming it has alsa drivers?There are two ways to get alsa sound out your digital SPDIG plug in MythTV.1) If you have OSS compatibility turned on change your myth output device to /dev/adsp - this will use the OSS mixer to output PCM sound via th
The GUI provided by Fedora is probably blocking this.
Edit /usr/kde/3.4/share/config/kdm/kdmrc and change the following
values:
AllowRootLogin = true
AutoLoginUser = root
AutoLoginPassword =
Please note that this is generally not recommended as its a MAJOR
security hole - but it is possib
I also concur - the card is great.
I've got two of them on a backend here and after several weeks of
driver changes, antenna movement, etc. I got them working nicely with
10 channels beamed from 40K away (buffalo to Toronto).
Some general notes:
- the card seems to work best with a audio sa
I'm running something similar without issue.
Do you have a link from .lircrc to .mythtv/lircrc ? (Not sure if
essential - but thats how mine is setup).
David
On 30-Jul-05, at 7:45 PM, Mark Schuren wrote:
hi list,
i have a problem with myth0.18.1 + lirc + xine:
i play a video/dvd thro
Its funny, I've spent most of the day trying to get this to work
properly, succeeded (briefly) - only to find intermittent failures.
Hardware:
AMD64 3200, with 1GB of RAM
NVidia 5200
HD3000 using DVB drivers
Software:
MythTV 18.1
Nvidia .7667
Gentoo Linux with gentoo-sources 2.6.12-r4
I can g
This will need to be done using DVI - you'll want to do a quick google search on timings and DVI for HDTV.Its worth it - when completed your picture will be NICE.DavidOn 29-Jul-05, at 6:30 PM, Brandon Rogers wrote: Thanks for all your feedback. I guess I should have been more specific. The Chain
1 - 100 of 102 matches
Mail list logo
