entries
SyncPositionMap, new Totframes: 75, newlength: 2, posMap size: 6
Stream initial keyframedist: 15.
?Ideas?Frostykev <[EMAIL PROTECTED]> wrote:
Any Ideas?--- Frostykev <[EMAIL PROTECTED]>wrote:> FC3> Kernel: 2.6.11-1.27_FC3> Frontend/backend in same machine.> PVR250>
Any Ideas?
--- Frostykev <[EMAIL PROTECTED]> wrote:
> FC3
> Kernel: 2.6.11-1.27_FC3
> Frontend/backend in same machine.
> PVR250
> nvida generic card to NEC monitor
> myth SW: 0.18.1.20050523-1
> ivtv: ivtv: version 0.2.0 (rc3j)
>
--- Chad <[EMAIL PROTECTED
FC3
Kernel: 2.6.11-1.27_FC3
Frontend/backend in same machine.
PVR250
nvida generic card to NEC monitor
myth SW: 0.18.1.20050523-1
ivtv: ivtv: version 0.2.0 (rc3j)
--- Chad <[EMAIL PROTECTED]> wrote:
> What's your hardware situation? Is this
> frontend/backend on the same
> machine? What versio
about smooth playback at this point, as
this is my testing backend, but need it to be stable
enough and not crash!!
Ideas?
--- Frostykev <[EMAIL PROTECTED]> wrote:
> I managed to Alt-Tap right after selecting watch
> recorded video. Below is what was on the
> mythfrontend termi
Using XV on port 61
Changing from None to WatchingPreRecorded
Realtime priority would require SUID as root.
Hopefully this is something simple that I've overlooked, since I'm pretty new to linux, I wouldn't doubt it!Frostykev <[EMAIL PROTECTED]> wrote:
When I attempt to watch liv
When I attempt to watch live tv via MythTv, keyboard
locks up, system locks up, I get about 2 seconds of
sound then either nothing or sound repeating. No
video, black screen.
No problems when i test the capture with:
cat /dev/video0 > /tmp/test_capture.mpg
and
mplayer -vo xv /tmp/test_capture.
prog.log
> --pidfile /var/run/$prog.pid"
>
> I think the frontend writes to stdout and is pretty
> verbose about it.
>
> On 6/26/05, Frostykev <[EMAIL PROTECTED]> wrote:
> > 1st, where are the backend and frontend logs
> located?
> > I've looked in var/log
Attempting to watch live tv or watch a recorded show
locks up my PC. keyboard doesn't work, even caps lock
won't light up.
Following Jason's guide, the test video capture and
replay works fine.
I have enabled loging on the Mythtv suite, but it has
yet to capture it to a log, at least within
Thanks to all.
I didn't know what "udev" was so I was searching for dev/video0 and reboot, with little success, hence the post.
When I looked for udev and reboot I found a great write-up:
http://mythtv.org/pipermail/mythtv-users/2004-December/066857.html
This fixed my problem, only change
t;[EMAIL PROTECTED]> wrote:
> On 6/19/05, Frostykev <[EMAIL PROTECTED]> wrote:
> > If it is already running, I don't know about it.
> How would I tell/start it?
> >
> > lircd exists in /etc/init.d/
> >
>
> I've not been following this
If it is already running, I don't know about it. How would I tell/start it?
lircd exists in /etc/init.d/
Nick <[EMAIL PROTECTED]> wrote:
On 6/18/05, Frostykev <[EMAIL PROTECTED]>wrote:> I don't get an OK or any response after:> # /sbin/service lircd start> >
Originally capture video worked fine on my setup.
After a reboot It comes up with:
[EMAIL PROTECTED] mythtv]# cat /dev/video0 > test.mpg
cat: /dev/video0: No such file or directory
Not sure what is causing this, so Im including as much
trouble shooting info that I have done to date. Any
help w
I don't get an OK or any response after:
# /sbin/service lircd start
I looked through /var/log/messages and I see no
mention of lircd. What should be there? Any suggestions?
Yahoo! Sports
Rekindle the Rivalries. Sign up fo
wget
https://svn.wilsonet.com/svn/mythtvology/trunk/rc.sysinit-mm.diff
I'm gettting connection errors (2 days now) is the
site down?
Yahoo! Sports
Rekindle the Rivalries. Sign up for Fantasy Football
http://football.fantasy
THANK YOU!!!
I read it as two seperate items, ie Confi issue, and
then use these commands!!
Again, Thanks.
--- Nick <[EMAIL PROTECTED]> wrote:
> On 6/17/05, Frostykev <[EMAIL PROTECTED]> wrote:
> > following the guide, ran into the following:
> >
> > [EMAIL
What is the "ivtv-specific configuration info" I'm
using a PVR-250. Thanks
Now, edit /etc/modprobe.conf to add ivtv-specific
configuration info. For the PVR-250 and PVR-250 MCE,
as well as PVR-350 users that aren't using its TV-Out,
for NTSC, this should do the trick (note the extra
tveeprom and
following the guide, ran into the following:
[EMAIL PROTECTED] mythtv]# ivtv modules setup
bash: ivtv: command not found
Prior to that I had a failure:
apt-get install ivtv-kmdl-$KVER
Reading Package Lists... Done
Building Dependency Tree... Done
E: Couldn't find package ivtv-kmdl
so I re-inst
s the best solution, and the
screen >will only work in X,
>so you'll get a black screen until X fires up.
>
>ModeLine "1280x720" 74.170 1280 1350 1390 1650 720
725 >730 750 -hsync +vsync
>
>If somebody has a better solution I'm always up to
>trying somethi
When I purchased the Pundit, I wasn't even thinking about DVI-A. I sure hope that its actually a digital or Integrated output, not an analog. Should be a couple of users on here that know!
Thanks.
Frostykev wrote: > I am in the process of loading MythTv on my Asus pundit (not R) usi
I am in the process of loading MythTv on my Asus pundit (not R) using the SIS chipset. So far the install is going well. The problem is that my samsung is not recognizing the DVI. Using the SISCTRL program it looks like the DVI port is an Analog port. Is this true? Will an Analog DVI port wor
I'll start over from scratch, again, right now apt-get upgrade doesn't work, so. . .
Let me know if you run into the yum problem tonight, can't say that this problem isn't due to my newness to linux!
KevinJarod Wilson <[EMAIL PROTECTED]> wrote:
On Wednesday 29 Dece
So, it looks like only yum was uninstalled:
# apt-get remove yum
Reading Package Lists... Done
Building Dependency Tree... Done
The following packages will be REMOVED:
yum
0 upgraded, 0 newly installed, 1 removed and 164 not
upgraded.
Need to get 0B of archives.
After unpacking 654kB disk space
Alright,
A smart person once said, when you find yourself in a hole, stop digging. . .
After futher research i tried:
apt-get remove yum
I did this because I read that mythtv doesn't need yum to operate, am I correct or not on that assumption?
I then proceed to:
apt-get update && apt-get d
m one of the updates? Maybe I forgot to check a box during the installation?Chuck Rice <[EMAIL PROTECTED]> wrote:
At 8:12 AM -0800 12/28/04, Frostykev wrote:>Hello all, I'm starting to build my first MythTV>system. Also a newbie to Linux. I have searched the>archives with little
Hello all, I'm starting to build my first MythTV
system. Also a newbie to Linux. I have searched the
archives with little success for this problem:
after apt-get install apt yum
I get a dependancy error, specifically:
The following packages have unmet dependencies:
yum: Depends: /usr/lib/py
25 matches
Mail list logo
