I just finished an install from Jarod's instructions, PVR 250 silver &
black, got the file or it from the lirc web site. They have hundred's of
conf files for remotes there.
David
On Wed, 2005-11-02 at 23:52 +, Nick wrote:
> On 02/11/05, Marty Ravell <[EMAIL PROTECTED]> wrote:
> > >On 01/11
On 02/11/05, Marty Ravell <[EMAIL PROTECTED]> wrote:
> >On 01/11/05, Marty Ravell <[EMAIL PROTECTED]> wrote:
> >> I started messing with my lirc config in order to get my serial
> transmitter
> >> working and have somehow messed things up. Am wondering if these symptoms
> >> ring bells for anyone.
>On 01/11/05, Marty Ravell <[EMAIL PROTECTED]> wrote:
>> I started messing with my lirc config in order to get my serial
transmitter
>> working and have somehow messed things up. Am wondering if these symptoms
>> ring bells for anyone.
>>
>> If I use irrecord to build an lircd.conf file it seems to
On 01/11/05, Marty Ravell <[EMAIL PROTECTED]> wrote:
> I started messing with my lirc config in order to get my serial transmitter
> working and have somehow messed things up. Am wondering if these symptoms
> ring bells for anyone.
>
> If I use irrecord to build an lircd.conf file it seems to work.
On 10/19/05, Roger McClurg <[EMAIL PROTECTED]> wrote:
> I am installing Mythtv on Gentoo Linux. I am using a VIA EPIA M1
> with a PVR-350 for hardware. I can't seem to get lirc working right.
> I've followed evry howto I can find for Mythtv and this
> hardware/software, searched the archives,
On 10/19/05, Roger McClurg <[EMAIL PROTECTED]> wrote:
I am installing Mythtv on Gentoo Linux. I am using a VIA EPIA M1with a PVR-350 for hardware. I can't seem to get lirc working right.I've followed evry howto I can find for Mythtv and thishardware/software, searched the archives, and monitor
I'm having this same problem on a fresh FC4 install. When I reboot,
lircd is dead, and the only think I've found to get it running again
without crashing, is to remove and then reinstall via yum. Then, when
you reboot, it's dead again and you repeat. Has anyone had this
problem, or found a solution
This may not be it, but ls a "ls -l /dev/li*" I think you want to see
these devices:
/dev/lircd
/dev/lirc0
/dev/lirc
However, /dev/lirc may not exist, so I had to run "ln -s /dev/lirc0
/dev/lirc" to create a link to lirc0. This seemed important for me (I
compiled lirc from source), so I added t
On 5/24/05, Jochen Kühner <[EMAIL PROTECTED]> wrote:
>
>
>
> I use mode2 and i get signal from my remote control.
>
> The I use irrecord and create my config file. That also works perfect.
>
>
>
> But now, when I run irw and pres buttons on my remote control, nothing
> happens!
Have
Sorry for the late replyYes, once I chmod-ed /dev/lirc*, all
worked just fine. IIRC, I had this problem in the last run of myth,
where I had to recompile from scratch after I had initially compiled
in lirc support
Thanks again
-CHris
On Wed, 2 Mar 2005 19:09:50 +0100, Marcel Janssen <[EMAIL
On Wednesday 02 March 2005 08:33, Christopher Robbins wrote:
> ActuallyI´m running SuSE 9.2 Professional. I´ve got the most
> experience with it, and it wasn´t too hard. But there wasn´t much
> documentation for SuSE/Myth, so I wrote a howto here -
>
> http://www.homerengineeringcorp.net/myth
HI!
Christopher Robbins wrote:
ActuallyI´m running SuSE 9.2 Professional. I´ve got the most
experience with it, and it wasn´t too hard. But there wasn´t much
documentation for SuSE/Myth, so I wrote a howto here -
http://www.homerengineeringcorp.net/mythtv/myth.html
BTW, there are RPMs for Sus
Well, a ´make distclean´ and a full recompile later and it´s finally
workingFor everyone who helped, thanks a lot!
-Chris
On Tue, 1 Mar 2005 23:33:52 -0800, Christopher Robbins
<[EMAIL PROTECTED]> wrote:
> ActuallyI´m running SuSE 9.2 Professional. I´ve got the most
> experience with it,
ActuallyI´m running SuSE 9.2 Professional. I´ve got the most
experience with it, and it wasn´t too hard. But there wasn´t much
documentation for SuSE/Myth, so I wrote a howto here -
http://www.homerengineeringcorp.net/mythtv/myth.html
-Chris
On Wed, 2 Mar 2005 08:30:56 +0100, Marcel Jansse
On Wednesday 02 March 2005 02:15, Christopher Robbins wrote:
> Still nothingShould I reinstall and start from scratch? (Includ.
> recompiling mythtv?)
In case you've use ATrpms mythtv packages, that wouldn't be necessary. It
should work.
Regards,
Marcel
__
On Tuesday 01 March 2005 21:58, Andy Long wrote:
> it seems lirc is working if /usr/bin/irw gets input. if you are going
> to reinstall anything, i'd leave it at jsut mythtv
Copy that. And make sure you had native lirc support turned on in settings.pro
when you compiled.
> On Tue, 1 Mar 2005 17
it seems lirc is working if /usr/bin/irw gets input. if you are going
to reinstall anything, i'd leave it at jsut mythtv
On Tue, 1 Mar 2005 17:15:57 -0800, Christopher Robbins
<[EMAIL PROTECTED]> wrote:
> Still nothingShould I reinstall and start from scratch? (Includ.
> recompiling mythtv?
Still nothingShould I reinstall and start from scratch? (Includ.
recompiling mythtv?)
-Chris
On Tue, 1 Mar 2005 20:48:23 +0100, Marcel Janssen <[EMAIL PROTECTED]> wrote:
> On Tuesday 01 March 2005 20:09, Christopher Robbins wrote:
> > linux:~ # ls -l /dev/lirc*
> > crw--- 1 root root 61
On Tuesday 01 March 2005 20:09, Christopher Robbins wrote:
> linux:~ # ls -l /dev/lirc*
> crw--- 1 root root 61, 0 Feb 28 22:14 /dev/lirc
> crw--- 1 root root 61, 0 Feb 28 22:14 /dev/lirc0
> srwxrwxrwx 1 root root 0 Feb 28 22:32 /dev/lircd
> prw--- 1 root root 0 Oct 2 01:37
When I installed, I did use the switch so the frontend would run with
root privileges.But copying lircrc to /root/.mythtv/ hasn´t worked
either..
I also chmod-ed /dev/lirc and /dev/lirc0 to no avail..
On Tue, 1 Mar 2005 14:15:21 -0500, Pete Stagman <[EMAIL PROTECTED]> wrote:
> Are y
Are you running mythfrontend as user mythtv or root or something else?
It sounds like the frontend can't find lircrc.
Make sure that lircrc is in the ~/.mythtv directory of whatever user
is running it.
--Pete
On Tue, 1 Mar 2005 11:09:24 -0800, Christopher Robbins
<[EMAIL PROTECTED]> wrote:
> l
linux:~ # ls -l /dev/lirc*
crw--- 1 root root 61, 0 Feb 28 22:14 /dev/lirc
crw--- 1 root root 61, 0 Feb 28 22:14 /dev/lirc0
srwxrwxrwx 1 root root 0 Feb 28 22:32 /dev/lircd
prw--- 1 root root 0 Oct 2 01:37 /dev/lircm
Should I chmod both lirc and lirc0?
-Chris
On Tue, 1 M
Hi Chris,
> myth. Any help is greatly appreciated.
It looks like your lirc device does not exist or you have no permission to
access it.
from you log file :
Feb 26 10:41:35 linux lircd 0.7.1pre2: could not open /dev/lirc
Feb 26 10:41:35 linux lircd 0.7.1pre2: default_init(): No such device
An
Yes, it is the newer, silver remote w/A415-HPG in the battery
compartmentAll of the keys register fine in irw, but nothing
registers within mythfrontend.
-Chris
On Tue, 01 Mar 2005 13:01:55 -0500, Ben Giddings
<[EMAIL PROTECTED]> wrote:
> Christopher Robbins wrote:
> > I can´t seem to get my
Christopher Robbins wrote:
I can´t seem to get mythfrontend to use my remote. I´m using a
PVR-350 with LIRC-0.7.1pre2 on kernel 2.6.10. I´ve attached my
lircd.conf, lircrc, and /var/log/lircd. I have
linked ~/.lircrc to /home/mythtv/.mythtv/lircrc properly. I´m using
the lirc_i2c and lirc_dev
I have some similar problems. I restarted mythtv, just adjusted some
xine parameters
while mythtv was not running. Now remote works with irw and xine, but
not in MythTV.
I have FC3 , installed with jarod's guide .. wondering what might
have caused it ..
- McIne -
On Mon, 7 Feb 2005 02:10:44 -050
My guess is because LIRC doesn't ever seem to like to load properly
under that kernel. Ever. You can modify your /etc/rc.d/rc.local file
to try to get it to load properly. The problem is basically that the
device is actually /dev/lirc0, but LIRC is looking for /dev/lirc.
Making the rules file d
On Tue, 8 Feb 2005 16:38:53 -0500, James Olsovsky wrote:
>
> Feb 8 16:30:35 Mythtv lircd 0.7.0[2917]: accepted new client on /dev/lircd
> Feb 8 16:30:35 Mythtv lircd 0.7.0[2917]: could not get file
> information for /dev/lirc
> Feb 8 16:30:35 Mythtv lircd 0.7.0[2917]: default_init(): No such fil
Well, it was a series of issues...
First of all, I did have to do some of what Jarod outlines in his FC3
steps (adding the
install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install lirc_i2c
line to the bottom of modprobe.conf
and
edit /etc/init.d/lircd, modifying the '# chkconfig: -
If I was to shoot a guess, I bet if you look in /var/log/messages
you'll find that whenever you try to fire up /usr/bin/irw, you're
getting a message saying it can't open /dev/lirc or /dev/lirc0. Is
that there?
On Mon, 7 Feb 2005 07:20:23 +0100 (CET), Hugo van der Kooij
<[EMAIL PROTECTED]> wrote
yOn Sun, 6 Feb 2005, Robin Smith wrote:
> So after months of happy Mything on FC2 2.6.8-1.521, I decided to
> update my kernel to FC2 2.6.9-1.11. After fighting with ndiswrapper
> (current version doesn't work and I forgot I had to re-install each
> time I changed the kernel) and the breaking vide
I Added the udev stuff but it hasn't fixed the problem. During the
install everything worked, after i rebooted nothing worked. I can now
reload the ivtv manually to get myth to display TV, however no matter
what i try to do with lirc i can't get it to run again. As soon as
something tries to us
reas) -
so it's shut down right now...
HTH!
-Rob
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jarod Wilson
Sent: Saturday, December 04, 2004 9:50 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] lirc problems
On Saturday 04 December 2004
On Saturday 04 December 2004 19:14, Edward G.Finegan wrote:
> I have just install myth on FC3 with a pvr 250. I followed this
> excellent how to located here: http://wilsonet.com/mythtv/index.php .
> After the install everything was working great. I reboot the system and
> myth and the pvr remote w
34 matches
Mail list logo
