On 27 November 2012 15:29, Travis Runyard travisruny...@gmail.com wrote:
Its the S attribute, just like D,U,C,W,R etc... just put it in your
contacts.cfg and templates.cfg
Modify your contacts/contactgroups as:
define contact {
.
host_notification_options d,u,r,s
.
On 25 May 2012 20:49, Ajay Jethani ajay.jeth...@redlinetrading.com wrote:
Is there a recommended or a sample framework (outside of nagios) that
would be useful in implementing that page or is the page that it would
point to something that is mostly home-grown by developers?
You may want to
Dear fellow Nagios users,
We have a bunch of servers on which we have shared filesystems. The
filesystem actually resides on the SAN storage and are connected to
physical servers. Let's say /home is shared among server1 and server2.
When /home breaches the WARNING or CRITICAL threshold it
On 14 October 2011 09:56, Joerg Linge pitchf...@ederdrom.de wrote:
http://nagios.manubulon.com/snmp_storage.html
+1 to that. We use this plugin to monitor disk space on Linux and Windows
servers, never had any troubles.
Thank you all for taking time to read my e-mail, your patience and valuable
suggestions. I will try to evaluate them all the post my findings.
Thank you ever so much once again.
Ashish Kumar
--
All the data continuously
Hello fellow Nagios users,
I have configured a couple of hosts in Nagios, since they are the nodes of a
HA cluster the services are running on the active host only. As obvious
Nagios is showing the services down on the passive host. I tried using
check_cluster and check_cluster2 but due to the
I am thinking to define a new command and new service in Nagios
XI , I have manually edited the configuration file in
/usr/local/etc/nagios.cfg but *its not showing any that command and
service in the run Monitoring Wizard*
The commands are usually defined in
On 28 June 2011 17:41, Daniel Wittenberg
daniel.wittenberg.r...@statefarm.com wrote:
I’ve been playing with jolokia/jmx4perl for doing java monitoring and
it’s proving painful on websphere so curious what others are doing for java
and/or websphere monitoring?
Never tried Websphere but
On 19 June 2011 00:27, nag ios nagiost...@gmail.com wrote:
Hi my name is krishna i have installed nagios successfully in my system
which is ubuntu one,but i'm unable to start nagios through browser its
giving the error message as
Are you sure that Nagios has been successfully installed?
On 19 June 2011 00:27, nag ios nagiost...@gmail.com wrote:
Hi my name is krishna i have installed nagios successfully in my system
which is ubuntu one,but i'm unable to start nagios through browser its
giving the error message as
Are you sure that Nagios has been successfully installed?
On 19 June 2011 13:43, nag ios nagiost...@gmail.com wrote:
When i ran this command
sudo /usr/local/nagios/bin/nagios /usr/local/nagios/etc/nagios.cfg -d
I got the following output is anything wrong?
[1] 6369
krishna@krishna:/usr/local/nagios/etc$
Nagios Core 3.2.3
Copyright (c)
BUT, now I see tonnes of performance data in the
/usr/local/pnp4nagios/var/spool directory
how come they don't get deleted?
The files in the spool directory usually gets deleted every few seconds.
Can you try:
# service npcd restart
notification_interval 120 ; Re-notify about service problems every
hour
You may want to change the value of notification_interval value to 60 if you
would like to receive the notification after each hour.
define service{
use NWKService
host_name
Dear fellow Nagios users,
I was just wondering if anyone is monitoring Windows mount points? If yes,
are there any plugins available for it?
I tried searching the archive and Google but couldn't find anything
relevant.
Any advise/pointers are appreciated.
Thanks
What do you want to monitor exactly?
Here is a reference to what Windows mount points actually are:
http://www.techrepublic.com/blog/datacenter/use-mount-points-if-you-run-out-of-windows-drive-letters/383
However, Windows' SNMP implementation does not publish this information so I
was
On 1 June 2011 00:29, Jim Avery j...@jimavery.me.uk wrote:
On 31 May 2011 17:18, Kumar, Ashish xml.de...@gmail.com wrote:
Hello Everyone,
I had been under the impression that no service checks would be executed
on
a server during scheduled downtime but it seems otherwise.
Would I
On Wed, Mar 16, 2011 at 7:51 PM, Anand, Sakshi sa185...@ncr.com wrote:
I have gone through this article. Not of much help to me :(
Is it somehow possible that nagios fetches service name from passive check
sent to it and display it as it is to nagios home page?
Regards,
Sakshi Anand
On Wed, Jan 26, 2011 at 7:47 PM, Dario B. Bestetti (OpServices)
dario.beste...@opservices.com.br wrote:
Try SMSTOOLS (http://smstools3.kekekasvi.com/), it worked better than
Gnokii for us.
_
Indeed. You just have to do some extra
Help, any thoughts or known solution regarding this would be appreciated?
Try setting debug=1, re-run the command and check /var/log/messages, it
usually helps :)
--
Nokia and ATT present the 2010 Calling All
Jun 2 12:10:14 fda12 setroubleshoot: SELinux is preventing /bin/ping
access to a leaked
/usr/local/nagios/var/spool/checkresults/check43t3S5 file descriptor.
For complete SELinux messages. run sealert -l
5af60ca2-178e-40da-ac17-5b6fbb72db15
This issue is related to SELinux. If you have no
On Tue, May 11, 2010 at 10:57 PM, Richard Lynch richard.ly...@rasmussen.edu
wrote:
As I look at the “Technical Monitoring Overview” frame on my laptop proof
of concept install, there is no DOCTYPE, and the encoding is ISO-8859-1...
#fail
Thanks for the idea but the frame status.cgi has
Currently RHEL5.4, but it would be good to have the option for Debian (3/4),
AIX, HPUX (RISC Itanium, both 11.23/11.31), Solaris, and zLinux (Suse11).
However none of these are a requirement – more of nice option….
B
I have written plugins for AIX and Sun Solaris. I will try tomorrow
What I am looking for is something like this, but I would prefer something
more basic - I have only a handful of servers I want to monitor the network
bandwith on, and to be honest MRTG looks like it has way more functionality
than I need. I really just want something basic.
What platforms
Is this relevant?
http://www.mail-archive.com/pld-cvs-com...@lists.pld-linux.org/msg195151.html
Looks like it might be but I don't really understand it.
I'm using Nagios Version 3.0.6 on CentOS. I wonder if this is fixed in a
later
version.
Ian
I think the status info is Ajax-ed
I personally like using the hostname first, then the service. Something
like this for example:
adams : RAM is in a CRITICAL state!
It makes it easier for me to sort alerts in Outlook that way (I have a rule
sending all alerts to a separate folder), so I can see everything going on
Hello,
We are currently using Nagios 3.0.6 on RHEL 5.
I have checked Nagios archives already but there is something I found
strange, so I am posting it here.
I was testing UTF-8 support in Nagios with following are the results:
1. Created 3 filesystems /Индия, /भारत, /インド (thank you Google
Greetings,
We are sending e-mail alerts on host/service state change. I was just
wondering what do you guys use as subject lines; just looking around for
ideas.
Thank you in advance.
--
'is_volatile 1' is defined for this kind of services?
http://nagios.sourceforge.net/docs/3_0/objectdefinitions.html#service
setting is_volatile to 1 really did the magic. I tested it with test case
#3 and the result is OK.
I really appreciate your swift and prompt response. Thank you.
check the environment of the users launching the script. Which user do you
use to launch the script locally? And which one from remote?
On nagios server I have tried executing it as root user as well as
nagios user but the problem remains.
Hello all,
I made a mistake in the plug-in. Both
I am getting different results from NRPE than the local commands that NRPE
is supopsed to be running. I am trying to understand if I am doing
something wrong, or if I am hitting a bug. the process is NOT running, and
the local command verifies this. the NRPE command from the server is
Hello,
We are facing an interesting but strange issue while trying to monitor
Oracle RAC services.
Oracle RAC is running on AIX 5.3 and nagios is running on Fedora Core 9.
The scripts we are using to monitor Oracle RAC services on AIX are as follows
-
$ cat
Now My question is how can I get this working? I tried most of the
things available on internet but nothing seems to be working.
Am I missing any step or any local configuration , then please specify.
It is giving me hard time
Have you tried printing the message in the end?
I would like to add my Active Directory users to nagios contact group.
I have edited /etc/nagios/objects/contacts.cfg file and added:
define contactgroup{
contactgroup_name ad
alias ad
members user1, user2
}
first you
check the environment of the users launching the script. Which user do you
use to launch the script locally? And which one from remote?
Thank you for the response.
On remote system (AIX) I am using nagios user to execute the script.
Since the user nagios cannot execute crs_stat we have made
Hello,
I am planning to move application/process monitoring setup from active
to passive monitoring.
I read
http://nagios.sourceforge.net/download/contrib/documentation/misc/NSCA_Setup.pdf
but it doesn't really help on how to setup scripts and how monitoring
is done with NSCA, for example, how
Will you be doing Windows or Linux monitoring. If Windows, I have had
good luck with NSClient++. They also have a good amount of how-to on
their website.
I will be monitoring Linux and AIX servers only.
--
36 matches
Mail list logo