Thanks everyone for your help I appreciate it more than you know. I ended
up taking into consideration pretty much everything you suggested. I've
ordered it and will post a finished product in a few weeks...hopefully.
Shep
On Wednesday, April 6, 2016 at 12:23:38 PM UTC-6, gregebert wrote:
>
>
Hello again everyone. Thank you so much for your help with the last version
of my schematic design. After taking all that input into account and doing
some additional research I've redone my design and have posted it below.
Any additional input is welcome if you care to give it. Thanks again.
Sh
Greg,
Thanks for the info, I've taken pretty much all of into account in my
newest version. I indeed did get sockets for when this version inevitably
gets replaced by rev2. I'd be interested in taking a look at that .stl file
and maybe give it a print if you don't mind sharing.
Shep
On Thurs
gt;
>
> For direct driving, you could use the HV5122 or a similar device. But you
> would need a 5V to 12V level shifter. If you need more info, i can provide.
>
>
> Am Mittwoch, 30. März 2016 23:41:58 UTC+2 schrieb Asstroman:
>>
>> Hello Jonathan,
>>
>> I
k another look at it I think the power
supply will have no problem driving the necessary ~38mA. I'm still weighing
the pros and cons as I figure them out.
Shep
On Tuesday, March 29, 2016 at 1:04:19 PM UTC-6, Asstroman wrote:
>
> Hello, this is my first post here in the NeoNixi
David and gregebert,
Thanks for your replies, they were very helpful. It seems I have had a
somewhat profound misunderstanding of the operation of transistors but I've
spent the last few hours looking at the schematic David referenced as well
as other articles and youtube videos and I'm beginnin
hinking? Thanks again for your reply
and helping me to understand this stuff.
Shep
On Tuesday, March 29, 2016 at 1:04:19 PM UTC-6, Asstroman wrote:
>
> Hello, this is my first post here in the NeoNixie group so I hope this is
> an acceptable thread topic. I'm excited to find oth
Hello, this is my first post here in the NeoNixie group so I hope this is
an acceptable thread topic. I'm excited to find other people interested in
this sort of thing to get some feedback if anyone has it to offer.
Attached is a preliminary schematic that I designed for my first go at a
Ni