> -Original Message-
> From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On
> Behalf Of Quixotic Nixotic
> Sent: Saturday, March 24, 2012 7:47 PM
> To: neonixie-l@googlegroups.com
> Subject: Re: [neonixie-l] Vishay/Dale 16 digit alphanumeric gas plas
gt; Subject: Re: [neonixie-l] Vishay/Dale 16 digit alphanumeric gas plasma
>> display
>>
>> Dot, Comma, g, m = 18k
>> e, f, c and b = 10k
>> r, p, n, d, k, j, h, a = 8k2
>
> thanks!
> Since this is my first PCB, it would be kind if you have a look at my
>
> -Original Message-
> From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On
> Behalf Of Quixotic Nixotic
> Sent: Tuesday, March 13, 2012 4:42 PM
> To: neonixie-l@googlegroups.com
> Subject: Re: [neonixie-l] Vishay/Dale 16 digit alphanumeric gas plasm
On 13 Mar 2012, at 16:11, Bob Armstrong wrote:
>> smaller segments have less current and a higher resistor value.
>
> FWIW, there's actually a table in the datasheet that gives the surface
> area of each segment, and I'm going to speculate that the current is
> directly proportional to the area
> smaller segments have less current and a higher resistor value.
FWIW, there's actually a table in the datasheet that gives the surface
area of each segment, and I'm going to speculate that the current is
directly proportional to the area.
Bob Armstrong
--
You received this message becau
On 13 Mar 2012, at 12:06, Sven Killig wrote:
> As you can see, it's very similar to your's, but there's a discrepancy that
> makes me headaches: on page 49 in
> http://mirror2.ipdb.org/files/311/Williams_1989_Black_Knight_2000_Operations_Manual.pdf
> I can recognize 3 different resistor values f
> -Original Message-
> From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On
> Behalf Of Quixotic Nixotic
> Sent: Tuesday, March 13, 2012 8:40 AM
> To: neonixie-l@googlegroups.com
> Subject: Re: [neonixie-l] Vishay/Dale 16 digit alphanumeric ga
> -Original Message-
> From: Bob Armstrong [mailto:b...@jfcl.com]
> Sent: Tuesday, March 13, 2012 3:07 PM
> To: s...@killig.de
> Cc: neonixie-l@googlegroups.com
> Subject: RE: [neonixie-l] Vishay/Dale 16 digit alphanumeric gas plasma display
>
> Sorry to be dens
> -Original Message-
> From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On
> Behalf Of Quixotic Nixotic
> Sent: Tuesday, March 13, 2012 8:13 AM
> To: neonixie-l@googlegroups.com
> Subject: Re: [neonixie-l] Vishay/Dale 16 digit alphanumeric gas plas
> -Original Message-
> From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On
> Behalf Of Quixotic Nixotic
> Sent: Tuesday, March 13, 2012 8:22 AM
> To: neonixie-l@googlegroups.com
> Subject: Re: [neonixie-l] Vishay/Dale 16 digit alphanumeric gas plasm
On 12 Mar 2012, at 16:47, Sven Killig wrote:
> Now I'm in the process of doing the PCB layout and getting my BOM together.
Sven, do NOT go by my power supply layout. The two 1 ohm resistors should be
replaced with a 0.05ohm. Also my layout is really bad. It works now, but I had
to change the f
On 12 Mar 2012, at 16:47, Sven Killig wrote:
> Hello Group!
>
> I received
> http://de.mouser.com/ProductDetail/Vishay-Dale/PD007D07001S51/?qs=sGAEpiMZZMvkC18yXH9iIurp2WUOVpc7D8%2fd1LKTOnY%3d
> some days ago, wondering how to drive it.
Sven, now I am confused...
You label the the thread Visha
On 12 Mar 2012, at 23:23, Quixotic Nixotic wrote:
> You could simply make a four bit counter and have it free-running the 1 of 16
> decoder to sweep the display. You could still use the inhibit pin to blank
> the display when necessary. This would take the load off the microcontroller
> and fr
On 12 Mar 2012, at 16:47, Sven Killig wrote:
> Hello Group!
>
> I received
> http://de.mouser.com/ProductDetail/Vishay-Dale/PD007D07001S51/?qs=sGAEpiMZZMvkC18yXH9iIurp2WUOVpc7D8%2fd1LKTOnY%3d
> some days ago, wondering how to drive it. Thankfully I discovered
> http://www.tubeclockdb.com/forum/B
Hello Group!
I received
http://de.mouser.com/ProductDetail/Vishay-Dale/PD007D07001S51/?qs=sGAEpiMZZMvkC18yXH9iIurp2WUOVpc7D8%2fd1LKTOnY%3d
some days ago, wondering how to drive it. Thankfully I discovered
http://www.tubeclockdb.com/forum/Builders-Forum/86-Cherry-alphanumeric-display.html
which dri
15 matches
Mail list logo
