Hi,
I am working on snmptrapd and use a shell script (the same as the example
on the page) to receive trap messages. However I found I could only see 5
trap messages print out on the console if there are more than 5 traps. That
means trap messages were lose. I am not sure why this happened. Does a
Hi Everyone.
I googled around in vain about this error and an solution. We get an segfault
and error sometimes
snmpd[30535]: segfault at 7fffd53c7000 ip 7fcdbeb51b43 sp 7fffd53b4fa0
error 6 in libprdecode.so[7fcdbeb42000+24000]
Can it be that it exist an incompatibility with systemd a
If nothing else is displayed, it means that no SNMP packets arrives to the
switch : Check the complete path from your station to the switch, including
Firewalls, etc, etc.
A working access would be displayed like follow on the station/switch
STATION :
[jur466@nocu07 ~]$ /usr/bin/snmpwalk -c Mai
Hi,
after i enter :
term mon
debug snmp packets
i get : SNMP packet debugging is on
Abid
2013/7/29 Jurkiewicz Jean-Marc
> With « term mon » ( Terminal monitor) + “debug snmp” entered on the
> switch, you should get some messages *on the switch*.
>
> Do you see some ?
>
> ** **
>
With « term mon » ( Terminal monitor) + "debug snmp" entered on the switch,
you should get some messages on the switch.
Do you see some ?
Best regards
JM
De : Abid Ayoub [mailto:abid.ay...@gmail.com]
Envoyé : Montag, 29. Juli 2013 10:01
À : Lee
Cc : net-snmp-users@lists.sourceforge.net
Objet :
On 7/29/13, Abid Ayoub wrote:
> Hi,
>
> I get nothing, i get the same message : Timeout: No Response from
> so , are there other solutions to solve this problem ?
If you're not getting any debug output from the switch that would mean
the packets aren't getting there. Probably because
>> >> - a
Hi,
I get nothing, i get the same message : Timeout: No Response from
so , are there other solutions to solve this problem ?
Abid
2013/7/26 Lee
> On 7/26/13, Abid Ayoub wrote:
> >
> > I think that the problem is in udp port or in ip adresse because there is
> > only one community string con
