My agent crashes with segmentation fault on snmpwalk

Hello, I have a problem with my snmp agent in Net-SNMP (tested with versions 5.6.2.1 & 5.7.3) my agent crashes when responding to snmpwalk. When it reaches the end of my MIB tree it gives segmentation fault Steps to replicate the problem: snmpwalk -m ALL -v1 -cpublic localhost enterpris

perl mod compile issues

Not sure if this is the right list,  let me know if I am wrong and I will put it into one of the other lists. I am trying to compile the perl modules for net-snmp-5.2.1.1  I am getting the following error:   /usr/local/lib/libnetsnmpmibs.a(route_write.o)(.text+0x40e): In function `write_rt

AgentX master configuration question

Hello, I am using 5.2.1 on fedora core 2 machines.  I am trying to setup agentX for a group of machines that live in a sheltered part of my network.  There is one host that can see the rest of the network and I would like to turn this host into the Master.  I was hoping someone could help me

Rpm version of net-snmp

at 90% so it should have gone already :). The config is as follows: agentSecName root rouser root defaultMonitors yes Let me know if this is fine or if I misread the tutorial. Thanks again, Javier -Original Message- From: Thomas Anders [mailto:[EMAIL PROTECTED] Sent: Thursday, October

Rpm version of net-snmp

hello,I am using version 5.2.1 on a fedora core 2 machine. I loaded the agent via a rpm package.  Since I loaded this way how would be able to use Disman-event-mib support on the module? If someone could let me know that would be great. Thanks,Javier *

trap settings

hello,I was wondering if someone could help me out with debugging traps? I have a trap setup for the hard drive space it looks like: disk / 20%   my trap server is OpenNMS set as   trap2sink informsink   I know snmp is working because I have have data collected for this node.   Thanks,Ja

Snmp issue when changing java

Hello, I have net-snmp versions 5.2 and 5.2.1 on my fedora core 2 machines. I recently changed java from 1.4.2_03 to 1.4.2_08.  After I did this I started to see the below error: test040 11:19:06 snmpd[304]: Cannot find module (IP-MIB): At line 0 in (none) test040 11:19:06 snmpd[304]: Cannot

RE: ipXtable not usable in 5.2.1

Ok, Not a problem, thanks for the info. This makes me feel a bunch more sane than before :) Javier -Original Message- From: Robert Story [mailto:[EMAIL PROTECTED] Sent: Monday, August 08, 2005 2:11 PM To: Javier Torres Cc: net-snmp-users@lists.sourceforge.net Subject: Re: ipXtable not

RE: ipXtable not usable in 5.2.1

Robert, Since I installed this as a rpm are there options to get this active in that way or would I have to grab the src and recompile that? Regards, Javier -Original Message- From: Robert Story [mailto:[EMAIL PROTECTED] Sent: Thursday, August 04, 2005 11:10 AM To: Javier Torres Cc

include file & shell interaction

I was wondering if I could add an include file or add shell commands to the snmpd.conf file to look at? I am looking for this so I can roll out a standard config onto many machines 200 + and having an include file would allow for easier customization of items like syscontact and so on.   Re

RE: ipXtable not usable in 5.2.1

I see on the homepage for net-snmp there was an issue on 5.2.1 for the ifXTable.  It shows Patch available but I can't seem to find it.  Can someone please point me in the proper direction?     Linux: - New MFD ipSystemStats does not includ IPv6 stats. PATCH AVAILABLE - ifXTable f

ipXtable not usable in 5.2.1

I was hoping for some help on this one.  The release notes says this works in this release but the rpm I pulled down to work with my fc2 boxes does not have this available.  Although I see it in the MIB I cannot do a snmpwalk of the table nor can I do a get of the different oids.  Is there a

Adding oids to a mib?

Ok, So I saw the IfXtable was supposed to be supported in 5.2, I have 5.2.1 on fc2 and this seems not to be supported even  though I see the definition in the If-Mib.  Does anyone have a reason why the HC oids don't work?   Thanks, Javier

Adding oids to a mib?

One more item on this. In the mib_file.txt I do not see these items, but I do see them in the mib. Do I have to add them to the mib_file.txt before I can read them or have data put into them or am I missing something here?  If there is a doc already for this I am sorry and just point me th

Adding oids to a mib?

Hello I am running with 5.2.1 on a fedora C2 linux machine.  The IF-MIB that comes with the package does not contain the HC oids.  How would I go about either adding these oids or adding an updated IF-MIB file into the machine?   Regards,Javier **