Mushtaq Khan sent you a Friend Request on Yaari

Mushtaq Khan wants you to join Yaari! Is Mushtaq your friend? http://yaari.com/?controller=user&action=mailregister&friend=1&sign=YaariSQL674TKF794WHM805CNO657";>Yes, Mushtaq is my friend! http://yaari.com/?controller=user&action=mailregister&friend=0&sign=Ya

Re: snmptrapd forwarding

Hi Brett, The directive "traphandle " in snmptrapd.conf file will invoke an executable if it receives a trap with OID . The inputs to execuatble from snmptrapd is the ip adddress of trap sender and variable binding. In executable you can put the logic to read ip-address and variable-binding an

Re: Snmpwalk with Proxysetting is not working as expected.

Hi Dave, Sorry for asking the same question multiple times.I did this becuase the formate with which i was sending was not properly displayed on mailing list.I am seeing some special characters. Thanks, Mushtaq On 11/13/07, Dave Shield <[EMAIL PROTECTED]> wrote: > Can you please show a little pat

Snmpwalk with Proxysetting is not working as expected.

I was expecting all the proxy entries enterprises..185)* ** *Snmpwalk –c public –v 2c * ***The out-put had all proxy parameters under enterprises.proxy3* Note: Proxy1=1.3.6.1.2.1.154 Proxy2=.1.3.6.1.2.1.178 Proxy3=.1.3.6.1.4.1..185 Please let me know the behavior of proxy entries. Thanks, Mu

Is net-snmp tested on 64-bit processor ?

Hi, I have a requirement of bringing-up NetSNMP on MIPS64-bit processor. My worry is "long" data-type on 64-bit processor is 8-bytes. And in net-snmp code, i see that long is used by several files, where it is meant for INTEGER,COUNTER32, Gauge32 data-types of SNMP, which should be 4-byte when i

Re: [Fwd: What SNMP data type can i use to represent a floating pointnumber?]

system. Thanks, -Mushtaq Mike Ayers wrote: >>From: [EMAIL PROTECTED] >>[mailto:[EMAIL PROTECTED] On >>Behalf Of mushtaq khan >>Sent: Monday, July 16, 2007 1:40 AM >>To: net-user >>Subject: [Fwd: What SNMP data type can i use to represent a >>floating po

[Fwd: What SNMP data type can i use to represent a floating point number?]

--- Begin Message --- Hi, I am using net-snmp version 5.4. I have some variables of floating point data type, and i don't know what SNMP data type i used use for it. Please help me in this regard. Thanks, Mushtaq --- End Message --- -

Problem with building Netsnmp package for mips64.

Hi, Iam building Net-snmp package for mips64 processor. In compilation i didn't get any errors but none of .so files are getting generated. I have enabled --enable-shared option while configuring. Please help me to get out of this problem. I ran the configure with following options. RANLIB=mi

configure errors.Please guide me on this.

Hi, Iam building net-snmp package for mips64-octeon based board. And i gave following options to the configure. ./configure --with-cc=mips64-octeon-linux-gnu-gcc --with-ar=mips64-octeon-linux-gnu-ar --host=mips64 --target=mips64-octeon-linux --build=i386-pc-linux-gnu --prefix=/home/mushtaq/s

Is there any option to check, what mibs are supported by the package.

Hi, Is there any option, where i can check what are the mibs supported by the Net-snmp package. Thanks, Mushtaq - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and ta

What are mibs supported by Net-snmp

Hi, What are the mibs supported by Net-Snmp package. Thanks, -Mushtaq - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just dat

Re: Is there a support for MIPS-64 in Net-Snmp

Hi, It looks like Net-Snmp has a support for mips64, i found mips64 in basic-machine set in file config.sub. Can any one suggest me, what should be the options for ./configure (executable)? Thanks, -Mushtaq - This SF.net e

Is there a support for MIPS-64 in Net-Snmp

Hi, Does Net-Snmp supports MIPS 64-bit processor. What efforts are involved in adding a support for new-processor. Thanks, Mushtaq - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of

Re: Facing a problem with Dynamic MIB Module load

Hi Dave, Thanks for replying, I could successfully load the MIB module. Thanks, -Mushtaq Dave Shield wrote: > On 09/06/07, mushtaq khan <[EMAIL PROTECTED]> wrote: > >> I went through the SNMP tutorial for loading dynamically created MIB >> module. But when run the co

Facing a problem with Dynamic MIB Module load

Hi, I went through the SNMP tutorial for loading dynamically created MIB module. But when run the command "snmpset localhost UCD-DLMOD-MIB::dlmodStatus.1 i load" The result i got is : dlmodStatus.1 = load(4) But the expected result was dlmodStatus.1 = loaded(1) I am using the Net-Snmp ver 5.2.

snmpd is running but when tried to access variables, No response.

stname. Can any one suggest me why snmpd is not responding. Thanks, Mushtaq Khan. Send free SMS to your Friends on Mobile from your Yahoo! Messenger. Download Now! http://messenger.yahoo.com/download.php- Take Surveys. Earn