"Reizer, Eyal" writes:
> Add support for using with both wl12xx and wl18xx.
>
> - all wilink family needs special init command for entering wspi mode.
> extra clock cycles should be sent after the spi init command while the
> cs pin is high.
> - Use inverted chip select for sending a dummy 4
>
> > Add support for using with both wl12xx and wl18xx.
> >
> > - all wilink family needs special init command for entering wspi mode.
> > extra clock cycles should be sent after the spi init command while the
> > cs pin is high.
> > - Use inverted chip select for sending a dummy 4 bytes comm
> On the receiving side (e.g. fd01:1b10:1000::1) I see the decrypted packets
> with
> the 2.6.23 kernel:
> but NOT with the newer kernel:
Hi Joerg,
First steps to debug this would be:
cat /proc/net/xfrm_stat
ip -s xfrm state
ip -s xfrm policy
First command will show some error accounting, whi
> 在 2016年7月19日,23:03,Ilan Tayari 写道:
>
>> On the receiving side (e.g. fd01:1b10:1000::1) I see the decrypted packets
>> with
>> the 2.6.23 kernel:
>> but NOT with the newer kernel:
>
> Hi Joerg,
>
> First steps to debug this would be:
> cat /proc/net/xfrm_stat
> ip -s xfrm state
> ip -s xfrm
The ret variable is unused in wlcore_probe_of()
Remove it for fixing build warning.
Fixes: 01efe65aba65 ("wlcore: spi: add wl18xx support")
Signed-off-by: Eyal Reizer
---
drivers/net/wireless/ti/wlcore/spi.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/wireless/ti/wlcore/spi.c
On Tue, 2016-07-19 at 16:54 +0200, Kristian Evensen wrote:
> The firmware in several ZTE devices (at least the MF823/831/910
> modems/mifis) use OS fingerprinting to determine which type of device
> to
> export. In addition, these devices export a REST API which can be used
> to
> control the type
Hello
This patch series add the driver for sun8i-emac which handle the Ethernet MAC
present on Allwinner H3/A83T/A64 SoCs.
It supports 10/100/1000 Mbit/s speed with half/full duplex.
It can use an internal PHY (MII 10/100) or an external PHY
via RGMII/RMII.
This patch series enable the driver on
This patch adds documentation for Device-Tree bindings for the
Allwinner sun8i-emac driver.
Signed-off-by: LABBE Corentin
---
.../bindings/net/allwinner,sun8i-emac.txt | 65 ++
1 file changed, 65 insertions(+)
create mode 100644
Documentation/devicetree/bindings/ne
This patch add support for sun8i-emac ethernet MAC hardware.
It could be found in Allwinner H3/A83T/A64 SoCs.
It supports 10/100/1000 Mbit/s speed with half/full duplex.
It can use an internal PHY (MII 10/100) or an external PHY
via RGMII/RMII.
Signed-off-by: LABBE Corentin
---
drivers/net/ethe
Signed-off-by: LABBE Corentin
---
MAINTAINERS | 6 ++
1 file changed, 6 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 1d74837..daefb19 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -581,6 +581,12 @@ S: Maintained
F: Documentation/i2c/busses/i2c-ali1563
F: drivers/i2c/b
The sun8i-emac hardware is present on the Orange PI PC.
It uses the internal PHY.
This patch create the needed emac and phy nodes.
Signed-off-by: LABBE Corentin
---
arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 11 +++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/sun8
The sun8i-emac is an ethernet MAC hardware that support 10/100/1000
speed.
This patch enable the sun8i-emac on the Allwinner H3 SoC Device-tree.
The SoC H3 have an internal PHY, so optionals syscon and ephy are set.
Signed-off-by: LABBE Corentin
---
arch/arm/boot/dts/sun8i-h3.dtsi | 14
On Tuesday, July 19, 2016 12:05:00 PM CEST Jes Sorensen wrote:
> Arnd Bergmann writes:
> > On Tuesday, July 19, 2016 11:46:04 AM CEST Jes Sorensen wrote:
> >> > diff --git a/drivers/staging/rtl8192e/rtl819x_TSProc.c
> >> > b/drivers/staging/rtl8192e/rtl819x_TSProc.c
> >> > index 2c8a526773ed..e0a
AFAICT this message is just printed whenever input validation fails.
This is a normal failure and we shouldn't be dumping the stack over it.
Looks like it was originally a printk that was maybe incorrectly
upgraded to a WARN:
commit 62db5cfd70b1ef53aa21f144a806fe3b78c84fab
Author: stephen hemming
On 07/19/2016 09:16 PM, Brenden Blanco wrote:
Sets the bpf program represented by fd as an early filter in the rx path
of the netdev. The fd must have been created as BPF_PROG_TYPE_XDP.
Providing a negative value as fd clears the program. Getting the fd back
via rtnl is not possible, therefore re
On Wed, Jul 20, 2016 at 08:51:17AM +0800, Liping Zhang wrote:
> 2016-07-18 11:39 GMT+08:00 :
> > From: Gao Feng
> >
> > Add nf_ct_helper_init, nf_conntrack_helpers_register/unregister
> > functions to enhance the conntrack helper codes.
>
> I think this patch is breaking something ...
>
> This
On Wed, Jul 20, 2016 at 09:02:52AM +0800, 高峰 wrote:
> Oh, thanks Liping.
> I have not found the extra port styles are different of irc, sane and tftp
> with ftp.
>
> Hi Pablo,
> Then should I modify the original patch or send a new one?
No need to resend, I have just sent an amendement that I'm
I've observed a NULL pointer dereference in ieee802154_del_iface() during
netlink fuzzing. It's the ->wpan_phy dereference here:
phy = dev->ieee802154_ptr->wpan_phy;
My bet is that we're not checking that this is an IEEE802154 interface,
so let's do what ieee802154_nl_get_dev() is doing.
On Wed, Jul 20, 2016 at 08:31:13AM +0800, 高峰 wrote:
> Thanks Pablo.
>
> I had used the script "checkpatch.pl" to check the patch file.
> There was no indentation error reported.
>
> So could you give me more tails please or point one indentation error?
> Then I could correct it by myself next tim
On 07/19/2016 09:16 PM, Brenden Blanco wrote:
Add support for the BPF_PROG_TYPE_XDP hook in mlx4 driver.
In tc/socket bpf programs, helpers linearize skb fragments as needed
when the program touches the packet data. However, in the pursuit of
speed, XDP programs will not be allowed to use these
Ok, I get it.
Thanks Pablo.
Another question, Liping found the port style of sip, irc, and tftp was
different with ftp.
It should be use iterator "i" to generate name for them.
Then should I update the original patch or create another one to correct it?
BTW, I am sorry about that. I didn't noti
On Wednesday, July 20, 2016 10:03:16 AM CEST LABBE Corentin wrote:
> +
> + /* Benched on OPIPC with 100M, setting more than 256 does not give any
> +* perf boost
> +*/
> + priv->nbdesc_rx = 128;
> + priv->nbdesc_tx = 256;
> +
>
256 tx descriptors can introduce a
On Tue, 19 Jul 2016, Alexei Starovoitov wrote:
On Wed, Jul 20, 2016 at 01:19:51AM +0200, Daniel Borkmann wrote:
On 07/19/2016 06:34 PM, Alexei Starovoitov wrote:
On Tue, Jul 19, 2016 at 01:17:53PM +0200, Daniel Borkmann wrote:
+ return -EINVAL;
+
+ /* Is this a user addr
On 07/20/2016 05:02 AM, Alexei Starovoitov wrote:
On Wed, Jul 20, 2016 at 01:19:51AM +0200, Daniel Borkmann wrote:
On 07/19/2016 06:34 PM, Alexei Starovoitov wrote:
On Tue, Jul 19, 2016 at 01:17:53PM +0200, Daniel Borkmann wrote:
+ return -EINVAL;
+
+ /* Is this a user addr
I am Mr.Saeed Bin Salem Executive Director and Chief Financial Officer of the
National Commercial Bank Libya.I have a secured business suggestion for you
reply me on my email: saeedbi...@qq.com
Sorry. Please ignore the last mail because there are some typos
in the patch.
In this patch, these typos are corrected.
Zhu Yanjun
From: Zhu Yanjun
With the original enum, when a several bits state is set, it is
possible that the wrong test occurs.
For example,
a state is 0x3, its bits are 11. When testing a state 0x2 whose
bits are 10, it is difficult to confirm that state 0x2 is set or
not.
As such, the MACROs are defin
Hello.
On 7/19/2016 11:25 PM, Jarod Wilson wrote:
I've got reports that the Intel I-218V NIC in Intel NUC5i5RYH systems used
as a PTP slave experiences random ~10 hour clock jumps, which are resolved
if the same workaround for the 82574 and 82583 is employed. Switching from
an if to a select, b
Arnd Bergmann writes:
> On Tuesday, July 19, 2016 12:05:00 PM CEST Jes Sorensen wrote:
>> Arnd Bergmann writes:
>> I think that would be better, albeit not a big issue.
>
> Ok, and since Kalle applied the first patch to his tree, I'm now sending
> a series of three patches that are all for Greg,
On Mon, Jul 18, 2016 at 05:11:03PM +0200, ggar...@abra.uab.cat wrote:
> From: Gerard Garcia
>
> Better testing support files
>
> Signed-off-by: Gerard Garcia
> ---
> drivers/vhost/vsock.c | 52
> ++-
> 1 file changed, 47 insertions(+), 5 deletio
On 07/20/2016 10:32 AM, Vegard Nossum wrote:
AFAICT this message is just printed whenever input validation fails.
This is a normal failure and we shouldn't be dumping the stack over it.
Looks like it was originally a printk that was maybe incorrectly
upgraded to a WARN:
commit 62db5cfd70b1ef53a
On Wed, Jul 20, 2016 at 10:32:35AM +0200, Vegard Nossum wrote:
> AFAICT this message is just printed whenever input validation fails.
> This is a normal failure and we shouldn't be dumping the stack over it.
>
> Looks like it was originally a printk that was maybe incorrectly
> upgraded to a WARN:
On Wed, Jul 20, 2016 at 12:18:49PM +0300, Tariq Toukan wrote:
>
> On 20/07/2016 8:09 AM, David Miller wrote:
> >From: Brenden Blanco
> >Date: Tue, 19 Jul 2016 12:16:45 -0700
> >
> >>This patch set introduces new infrastructure for programmatically
> >>processing packets in the earliest stages of
On 07/20/2016 06:25 AM, Jes Sorensen wrote:
Arnd Bergmann writes:
On Tuesday, July 19, 2016 12:05:00 PM CEST Jes Sorensen wrote:
Arnd Bergmann writes:
I think that would be better, albeit not a big issue.
Ok, and since Kalle applied the first patch to his tree, I'm now sending
a series of t
On Wed, Jul 20, 2016 at 3:41 AM, wrote:
> From: Zhu Yanjun
>
> With the original enum, when a several bits state is set, it is
> possible that the wrong test occurs.
>
> For example,
>
> a state is 0x3, its bits are 11. When testing a state 0x2 whose
> bits are 10, it is difficult to confirm tha
From: Mark Bloch
When using an IPoIB bond currently only active-backup mode is a valid
use case and this commit strengthens it.
Since commit 2ab82852a270 ("net/bonding: Enable bonding to enslave
netdevices not supporting set_mac_address()") was introduced till
4.7-rc1, IPoIB didn't support the s
mlx5e_vxlan_core_del_port_cmd cleared the wrong address, the address of
the pointer of the buffer rather than clearing the buffer itself.
This can lead to a serious stack corruption.
Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling")
Signed-off-by: Saeed Mahameed
---
driv
For the ifndef case of CONFIG_BPF_SYSCALL, an inline version of
bpf_prog_add needs to exist otherwise the build breaks on some configs.
drivers/net/ethernet/mellanox/mlx4/en_netdev.c:2544:10: error: implicit
declaration of function 'bpf_prog_add'
prog = bpf_prog_add(prog, priv->rx_ring_nu
Add support for configurable impedance control for TI dp83867
phy via devicetree. More documentation in [1]
CPSW second ethernet is not working, fix it by enabling
impedance configuration on the phy.
Public Datasheet - http://www.ti.com/lit/ds/symlink/dp83867ir.pdf
Mugunthan V N (3):
net: phy:
Add documention of ti,impedance-control which can be used to
correct MAC impedance mismatch using phy extended registers.
Signed-off-by: Mugunthan V N
---
Documentation/devicetree/bindings/net/ti,dp83867.txt | 7 +++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bind
Second ethernet of cpsw is not working, make it work by adding
impedance configuration.
Signed-off-by: Mugunthan V N
---
arch/arm/boot/dts/dra72-evm-revc.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts
b/arch/arm/boot/dts/dra72-evm-revc.dts
index f
Add support for programmable MAC impedance configuration
Signed-off-by: Mugunthan V N
---
drivers/net/phy/dp83867.c | 22 ++
1 file changed, 22 insertions(+)
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 91177a4..ace3558 100644
--- a/drivers/net/ph
Arnd Bergmann wrote:
> rtlwifi, but I found the older r8712u device to work fine with
> the staging/rtl8712 driver.
A replacement for "staging/rtl8712", with MAC80211 support, is
available at: https://github.com/chunkeey/rtl8192su
Also a fullmac/cfg80211 driver(r92su) is available at the
same r
On Wednesday, July 20, 2016 7:25:19 AM CEST Jes Sorensen wrote:
> Arnd Bergmann writes:
> >> I'd like to get rid of all the drivers/staging/rtl* drivers eventually
> >
> > That would be great, yes.
> >
> > Can you clarify what the long-term plan is? I see that
> > drivers/net/wireless/realtek/rtl
Compiling the rtlwifi drivers for ARM with gcc -Wextra warns about lots of
incorrect code that results from 'char' being unsigned here, e.g.
staging/rtl8192u/r8192U_core.c:4150:16: error: comparison is always false due
to limited range of data type [-Werror=type-limits]
staging/rtl8192u/r8192U_dm
Compiling the rtlwifi drivers for ARM with gcc -Wextra warns about lots of
incorrect code that results from 'char' being unsigned here, e.g.
staging/rtl8192e/rtl8192e/r8192E_phy.c:1072:36: error: comparison is always
false due to limited range of data type [-Werror=type-limits]
staging/rtl8192e/r
There is one remaining warning about a type limit check in rtl8192e:
staging/rtl8192e/rtl819x_TSProc.c:326:14: error: comparison is always true due
to limited range of data type [-Werror=type-limits]
This changes a macro into a local function to clarify the types and simplify
the check while rem
On 07/20/2016 09:56 AM, Mugunthan V N wrote:
Add documention of ti,impedance-control which can be used to
correct MAC impedance mismatch using phy extended registers.
Signed-off-by: Mugunthan V N
---
Documentation/devicetree/bindings/net/ti,dp83867.txt | 7 +++
1 file changed, 7 insertio
Arnd Bergmann writes:
> On Wednesday, July 20, 2016 7:25:19 AM CEST Jes Sorensen wrote:
>> Arnd Bergmann writes:
>> Well it really all depends on how much time I have and how much others
>> step up and help contribute to the code. For rtl8xxxu my plans are as
>> follows:
>>
>> 1) rtl8188eu suppo
Arnd Bergmann writes:
> There is one remaining warning about a type limit check in rtl8192e:
>
> staging/rtl8192e/rtl819x_TSProc.c:326:14: error: comparison is always true
> due to limited range of data type [-Werror=type-limits]
>
> This changes a macro into a local function to clarify the types
On Wednesday, July 20, 2016 5:06:27 PM CEST Xose Vazquez Perez wrote:
> Arnd Bergmann wrote:
>
> > rtlwifi, but I found the older r8712u device to work fine with
> > the staging/rtl8712 driver.
>
> A replacement for "staging/rtl8712", with MAC80211 support, is
> available at: https://github.com/
On Wednesday, July 20, 2016 11:33:43 AM CEST Jes Sorensen wrote:
> Arnd Bergmann writes:
> > On Wednesday, July 20, 2016 7:25:19 AM CEST Jes Sorensen wrote:
> >> Arnd Bergmann writes:
> >> Well it really all depends on how much time I have and how much others
> >> step up and help contribute to t
Only reg_lock is necessary now and phy_mutex is dead. Remove it.
---
drivers/net/dsa/mv88e6xxx/mv88e6xxx.h | 6 --
1 file changed, 6 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
b/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
index 899ca1d..99de41f 100644
--- a/drivers/net/dsa/mv8
On Wed, Jul 20, 2016 at 07:55:52AM -0700, Brenden Blanco wrote:
> For the ifndef case of CONFIG_BPF_SYSCALL, an inline version of
> bpf_prog_add needs to exist otherwise the build breaks on some configs.
>
> drivers/net/ethernet/mellanox/mlx4/en_netdev.c:2544:10: error: implicit
> declaration of
Some switches can access an optional external EEPROM via its registers.
The 88E6352 family of switches have 8-bit address / 16-bit data access.
The new 88E6390 family has 16-bit address / 8-bit data access.
This patchset cleans up the EEPROM code with 16-suffixed Global2 helpers
and makes it easy
The 6352 family of switches and compatibles provide a 8-bit address and
16-bit data access to an optional EEPROM.
Newer chip such as the 6390 family slightly changed the access to 16-bit
address and 8-bit data.
This commit cleans up the EEPROM access code for 16-bit access and makes
it easy to ev
Get rid of the last usage of the locked mv88e6xxx_reg_read function with
a new mv88e6xxx_port_read helper, useful later for chips with different
port registers base address.
Signed-off-by: Vivien Didelot
---
drivers/net/dsa/mv88e6xxx/chip.c | 35 +++
1 file change
Use gro_gells to trigger GRO and allow RPS on macsec traffic
after decryption.
Also, be sure to avoid clearing software offload features in
macsec_fix_features().
Overall this increase TCP tput by 30% on recent h/w.
Signed-off-by: Paolo Abeni
Acked-by: Hannes Frederic Sowa
---
drivers/net/macse
This patches leverage gro_cells infrastructure to enable both GRO and RPS
on macsec devices.
Paolo Abeni (2):
gro_cells: gro_cells_receive now return error code
macsec: enable GRO and RPS on macsec devices
drivers/net/macsec.c| 32 +---
include/net/gro_cells.h
so that the caller can update stats accordingly, if needed
Signed-off-by: Paolo Abeni
Acked-by: Hannes Frederic Sowa
---
include/net/gro_cells.h | 11 +--
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/include/net/gro_cells.h b/include/net/gro_cells.h
index cf6c745..d1521
On Wed, Jul 20, 2016 at 05:48:48PM +0300, Saeed Mahameed wrote:
> mlx5e_vxlan_core_del_port_cmd cleared the wrong address, the address of
> the pointer of the buffer rather than clearing the buffer itself.
>
> This can lead to a serious stack corruption.
The change is fine, but commit log is comp
On Wed, Jul 20, 2016 at 7:15 PM, Alexei Starovoitov
wrote:
> On Wed, Jul 20, 2016 at 05:48:48PM +0300, Saeed Mahameed wrote:
>> mlx5e_vxlan_core_del_port_cmd cleared the wrong address, the address of
>> the pointer of the buffer rather than clearing the buffer itself.
>>
>> This can lead to a seri
On Wed, Jul 20, 2016 at 05:44:20PM +0300, Saeed Mahameed wrote:
> From: Mark Bloch
>
> When using an IPoIB bond currently only active-backup mode is a valid
> use case and this commit strengthens it.
>
> Since commit 2ab82852a270 ("net/bonding: Enable bonding to enslave
> netdevices not supporti
On Tue, Jul 19, 2016 at 08:49:03PM +, Rustad, Mark D wrote:
> Jarod Wilson wrote:
>
> >I've got reports that the Intel I-218V NIC in Intel NUC5i5RYH systems used
> >as a PTP slave experiences random ~10 hour clock jumps, which are resolved
> >if the same workaround for the 82574 and 82583 is
Andy Gospodarek wrote:
>On Wed, Jul 20, 2016 at 05:44:20PM +0300, Saeed Mahameed wrote:
>> From: Mark Bloch
>>
>> When using an IPoIB bond currently only active-backup mode is a valid
>> use case and this commit strengthens it.
>>
>> Since commit 2ab82852a270 ("net/bonding: Enable bonding to e
On Wed, Jul 20, 2016 at 10:13:47AM -0700, Jay Vosburgh wrote:
> Andy Gospodarek wrote:
>
> >On Wed, Jul 20, 2016 at 05:44:20PM +0300, Saeed Mahameed wrote:
> >> From: Mark Bloch
> >>
> >> When using an IPoIB bond currently only active-backup mode is a valid
> >> use case and this commit strengt
On Wed, Jul 20, 2016 at 11:07:57AM +0200, Daniel Borkmann wrote:
> On 07/19/2016 09:16 PM, Brenden Blanco wrote:
[...]
> >+if (ring->xdp_prog)
> >+bpf_prog_put(ring->xdp_prog);
>
> Would be good if you also make this a READ_ONCE() here. I believe this is the
> only other spot in yo
On Wed, Jul 20, 2016 at 10:38:49AM +0200, Daniel Borkmann wrote:
> On 07/19/2016 09:16 PM, Brenden Blanco wrote:
> >Sets the bpf program represented by fd as an early filter in the rx path
> >of the netdev. The fd must have been created as BPF_PROG_TYPE_XDP.
> >Providing a negative value as fd clea
On Tue, Jul 19, 2016 at 03:05:37PM -0700, Alexei Starovoitov wrote:
> On Tue, Jul 19, 2016 at 12:16:57PM -0700, Brenden Blanco wrote:
> > Add a sample that rewrites and forwards packets out on the same
> > interface. Observed single core forwarding performance of ~10Mpps.
> >
> > Since the mlx4 dr
On Tue, Jul 19, 2016 at 5:02 PM, Simon Horman
wrote:
> On Mon, Jul 18, 2016 at 03:34:52PM -0700, pravin shelar wrote:
>> On Sun, Jul 17, 2016 at 9:50 PM, Simon Horman
>> wrote:
>> > [CC Jiri Benc for portion regarding GRE]
>> >
>> > Hi Pravin,
>> >
>> > On Fri, Jul 15, 2016 at 02:07:37PM -0700, p
Add the official BPF ELF e_machine value that was assigned recently [1,2]
and will be propagated to glibc, et al. LLVM is switching to it in 3.9
release.
[1]
https://github.com/llvm-mirror/llvm/commit/36b9c09330bfb5e771914cfe307588f30d5510d2
[2] http://lists.iovisor.org/pipermail/iovisor-dev/
"Reizer, Eyal" writes:
> The ret variable is unused in wlcore_probe_of()
> Remove it for fixing build warning.
>
> Fixes: 01efe65aba65 ("wlcore: spi: add wl18xx support")
> Signed-off-by: Eyal Reizer
Applied to wireless-drivers-next, thanks.
--
Kalle Valo
From: Brenden Blanco
Date: Wed, 20 Jul 2016 07:55:52 -0700
> For the ifndef case of CONFIG_BPF_SYSCALL, an inline version of
> bpf_prog_add needs to exist otherwise the build breaks on some configs.
>
> drivers/net/ethernet/mellanox/mlx4/en_netdev.c:2544:10: error: implicit
> declaration of fu
On Fri, 15 Jul 2016 15:41:35 -0700
David Ahern wrote:
> Support was recently added for device filters. The intent was to allow
> the device to be specified by name or index, and using the if%u format
> (dev == if5) or the simpler and more intuitive index alone (dev == 5).
> The latter case is bro
On Fri, 27 May 2016 21:37:11 -0700
Roopa Prabhu wrote:
> From: Roopa Prabhu
>
> This patch series adds json support for a few bridge show commands.
> We plan to follow up with json support for additional commands soon.
>
> Anuradha Karuppiah (3):
> json_writer: allow base json data type to b
On Sat, 9 Jul 2016 11:22:44 +0200
Phil Sutter wrote:
> This series improves documentation around the feature of 'ip link set'
> to configure device type specific parameters. While doing so, I reviewed
> used fonts in ip-link.8 and fixed a few bugs/inconsistencies.
>
> Phil Sutter (6):
> iplin
From: Tariq Toukan
Date: Wed, 20 Jul 2016 12:18:49 +0300
>
> On 20/07/2016 8:09 AM, David Miller wrote:
>> From: Brenden Blanco
>> Date: Tue, 19 Jul 2016 12:16:45 -0700
>>
>>> This patch set introduces new infrastructure for programmatically
>>> processing packets in the earliest stages of rx,
On Mon, 18 Jul 2016 14:48:41 +
Phil Sutter wrote:
> This improves my initial change in the following points:
>
> - Flatten embedded struct's initializers.
> - No need to initialize variables to zero as the key feature of C99
> initializers is to do this implicitly.
> - By relocating the de
On Wed, Jul 20, 2016 at 10:03:18AM +0200, LABBE Corentin wrote:
> This patch adds documentation for Device-Tree bindings for the
> Allwinner sun8i-emac driver.
>
> Signed-off-by: LABBE Corentin
> ---
> .../bindings/net/allwinner,sun8i-emac.txt | 65
> ++
> 1 file ch
On Mon, 18 Jul 2016 09:51:17 +0200
Jiri Pirko wrote:
> From: Jiri Pirko
>
> Fix indentation of the very last "}" which is currently indented,
> leaving the last 2 "}" like this:
> \t}
> \t}
> EOF
>
> So fix it to be:
> \t}
> }
> EOF
>
> Fixes fcc16c2287 ("provide common json output formatter"
On Tue, 12 Jul 2016 07:56:16 +
Phil Sutter wrote:
> Description copied from related kernel support commit message with a
> little tailoring to fit.
>
> While at it, fix font of non-terminal CONFFLAG-LIST in synopsis.
>
> Signed-off-by: Phil Sutter
Applied
From: Daniel Borkmann
Date: Wed, 20 Jul 2016 20:17:47 +0200
> Add the official BPF ELF e_machine value that was assigned recently [1,2]
> and will be propagated to glibc, et al. LLVM is switching to it in 3.9
> release.
>
> [1]
> https://github.com/llvm-mirror/llvm/commit/36b9c09330bfb5e77191
Hi everyone.
The ethtool interface has ETHTOOL_PERQUEUE command that is used to
read/set per-queue parameters for multiqueue Ethernet devices.
I want to apply additional per-queue commands like per-queue bandwidth
and per-queue number of descriptors (like number of rings).
Currently only ETHTOO
On Wed, Jun 01, 2016 at 03:36:09PM -0700, Greg Rose wrote:
> On Wed, Jun 1, 2016 at 3:07 PM, Phil Sutter wrote:
> > On Wed, Jun 01, 2016 at 03:00:08PM -0700, Greg Rose wrote:
> >> On Wed, Jun 1, 2016 at 1:03 PM, Phil Sutter wrote:
> >> > Not sure whether I misinterpret commit 7b8179c780a1a, but i
On Tue, Jul 19, 2016 at 7:37 PM, Casey Schaufler wrote:
> Digging into this further I have determined that the
> circumstances leading to this issue are somewhat complex.
> The good news is that there seems to be a very limited
> circumstances under which the problem manifests.
>
> I have a socket
>
> Hi everyone.
>
> The ethtool interface has ETHTOOL_PERQUEUE command that is used to
> read/set per-queue parameters for multiqueue Ethernet devices.
>
> I want to apply additional per-queue commands like per-queue bandwidth
> and per-queue number of descriptors (like number of rings).
>
>
Hi Varun & Co,
On Sat, 2016-07-16 at 22:49 +0530, Varun Prakash wrote:
> Hi,
>
> This patch series adds common library module(libcxgb.ko)
> for Chelsio drivers to remove duplicate code.
>
> This series moves common iSCSI DDP Page Pod manager
> code from cxgb4.ko to libcxgb.ko, earlier this c
From: "Nicholas A. Bellinger"
Date: Wed, 20 Jul 2016 14:13:55 -0700
> DaveM, if you'd prefer to pick it up, I'm happy to drop it.
There were review comments and changes requested.
memset the command buffers rather than the pointers to them.
Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling")
Signed-off-by: Saeed Mahameed
---
V2:
- Improved log message.
drivers/net/ethernet/mellanox/mlx5/core/vxlan.c | 4 ++--
1 file changed, 2 insertions(+), 2 del
From: Johan Hedberg
Date: Tue, 19 Jul 2016 09:14:52 +0300
> Here's likely the last bluetooth-next pull request for the 4.8 kernel:
>
> - Fix for L2CAP setsockopt
> - Fix for is_suspending flag handling in btmrvl driver
> - Addition of Bluetooth HW & FW info fields to debugfs
> - Fix to use i
From: Wei Yongjun
Date: Tue, 19 Jul 2016 11:23:24 +
> From: Wei Yongjun
>
> In case of error, the function of_parse_phandle() returns NULL
> pointer not ERR_PTR(). The IS_ERR() test in the return value
> check should be replaced with NULL test.
>
> Fixes: 46aa27df8853 ('net: axienet: Use d
From: Wei Yongjun
Date: Tue, 19 Jul 2016 11:25:16 +
> From: Wei Yongjun
>
> module_platform_driver() makes the code simpler by eliminating
> boilerplate code.
>
> Signed-off-by: Wei Yongjun
Applied.
From: Wei Yongjun
Date: Tue, 19 Jul 2016 12:37:53 +
> From: Wei Yongjun
>
> Add the missing free_netdev() before return from function
> cpmac_probe() in the error handling case.
> This patch revert commit 0465be8f4f1d ("net: cpmac: fix in
> releasing resources"), which changed to only free_
From: Wei Yongjun
Date: Tue, 19 Jul 2016 11:25:03 +
> From: Wei Yongjun
>
> Remove .owner field if calls are used which set it automatically.
>
> Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
>
> Signed-off-by: Wei Yongjun
Applied.
From: Wei Yongjun
Date: Tue, 19 Jul 2016 11:33:10 +
> From: Wei Yongjun
>
> In ops->reset() error handling case, clk_disable_unprepare() is missed
> before return from this function.
>
> Signed-off-by: Wei Yongjun
Applied.
From: Wei Yongjun
Date: Tue, 19 Jul 2016 11:35:46 +
> From: Wei Yongjun
>
> Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR.
>
> Generated by: scripts/coccinelle/api/ptr_ret.cocci
>
> Signed-off-by: Wei Yongjun
Applied.
From: Jiri Pirko
Date: Tue, 19 Jul 2016 15:35:52 +0200
> From: Jiri Pirko
>
> Ido says:
>
> Add per-priority and per-tc counters, which are very useful for debugging
> purposes and fine-tuning.
Series applied.
From: Kristian Evensen
Date: Tue, 19 Jul 2016 16:54:11 +0200
> The firmware in several ZTE devices (at least the MF823/831/910
> modems/mifis) use OS fingerprinting to determine which type of device to
> export. In addition, these devices export a REST API which can be used to
> control the type
From: Vivien Didelot
Date: Wed, 20 Jul 2016 12:05:45 -0400
> Only reg_lock is necessary now and phy_mutex is dead. Remove it.
> ---
> drivers/net/dsa/mv88e6xxx/mv88e6xxx.h | 6 --
> 1 file changed, 6 deletions(-)
Missing a proper Signoff.
From: Soheil Hassas Yeganeh
sock_cmsg_send() can return different error codes and not only
-EINVAL, and we should properly propagate them.
Fixes: c14ac9451c34 ("sock: enable timestamping using control messages")
Signed-off-by: Soheil Hassas Yeganeh
Cc: Willem de Bruijn
---
net/packet/af_packe
1 - 100 of 168 matches
Mail list logo