On Wed, 18 Oct 2006, Rick Jones wrote:
> > I believe, but need to double check, that if I leave the BCM5461 in
> > autoneg, and foce the switch to 10M/full that the BCM5461 will autoneg at
> > 10M/half duplex.
>
> Indeed, if one side is hardcoded, autoneg will "fail" and the side trying to
> aut
Kumar Gala wrote:
I was wondering if anyone has had any issues when trying to force a
BCM5461 phy into 10M/full duplex. I seem to be having an issue in the
two managed switches I've tried this on but autoneg to 10/half. This
causes a problem in that I start seeing a large number of frame
I was wondering if anyone has had any issues when trying to force a
BCM5461 phy into 10M/full duplex. I seem to be having an issue in
the two managed switches I've tried this on but autoneg to 10/half.
This causes a problem in that I start seeing a large number of frame
errors.
I believ