Stephen Hemminger wrote:
That motherboard has dual lan, are you using both of them?
I don't have that chip version, so hard to tell if it is using dual port
with a single chip
or not. There is a hack for the dual port PCI-X version already in the
driver,
that turns off receive checksums if bo
Berck E. Nash wrote:
I've been having problems with the sky2 ethernet driver from the very
beginning. I have read the following:
http://marc.theaimsgroup.com/?l=linux-netdev&m=116384918914761&w=2
And the bug described still exists for me. I'm running 2.6.19-rc6-mm1.
That motherboard has dua
I've been having problems with the sky2 ethernet driver from the very
beginning. I have read the following:
http://marc.theaimsgroup.com/?l=linux-netdev&m=116384918914761&w=2
And the bug described still exists for me. I'm running 2.6.19-rc6-mm1.
The only relevant console output:
[55022.35321
On Tue, Oct 31, 2006 at 08:08:12AM +0100, Alexander Wirt ([EMAIL PROTECTED])
wrote:
> > > Run 2.6.19-rc3 or 2.6.18.2 or dig out the patch from last week.
> >
> > Thanks.
> > I hope debian maintainers will rebase it's tree eventually.
> Then please take sure that there is a bug report describing
Evgeniy Polyakov schrieb am Dienstag, den 31. Oktober 2006:
> On Mon, Oct 30, 2006 at 10:24:18PM -0800, Stephen Hemminger ([EMAIL
> PROTECTED]) wrote:
> > Run 2.6.19-rc3 or 2.6.18.2 or dig out the patch from last week.
>
> Thanks.
> I hope debian maintainers will rebase it's tree eventually.
The
On Mon, Oct 30, 2006 at 10:24:18PM -0800, Stephen Hemminger ([EMAIL PROTECTED])
wrote:
> Run 2.6.19-rc3 or 2.6.18.2 or dig out the patch from last week.
Thanks.
I hope debian maintainers will rebase it's tree eventually.
--
Evgeniy Polyakov
-
To unsubscribe from this list: send the line
Evgeniy Polyakov wrote:
sky2 from debian etch kernel (2.6.17-2) has stopped today after quite
big amount of traffic transferred (30MB/sec for about 3-4 hours).
rmmod/insmod does not help, reboot required.
Here is dmesg output:
Oct 31 06:40:07 kano kernel: NETDEV WATCHDOG: eth0: transmit timed o
sky2 from debian etch kernel (2.6.17-2) has stopped today after quite
big amount of traffic transferred (30MB/sec for about 3-4 hours).
rmmod/insmod does not help, reboot required.
Here is dmesg output:
Oct 31 06:40:07 kano kernel: NETDEV WATCHDOG: eth0: transmit timed out
Oct 31 06:40:07 kano ke
