Click on the home icon on desktop
select browser options from the options menu
you may have to enable proxy settings
enter your wingate ftp and http proxy setting
And you should have it
good luck
Steve
- Original Message -
From: James Mellema [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Linux says shut down to physically power down the system.
Any ideas are welcome.
TIA
Stephan Rex
Linux says shut down to physically power down the system.
Any ideas are welcome.
TIA
Stephan Rex
hi Civilme,
Being a newbie I don't understand fully what you
have said here.
Where do I define the gateway device as ppp0 and my
NIC already has a IP of 192.168.10.10 do I change this to 10.0.0.1
Thanks
Stephan
- Original Message -
From:
Civileme
To: [EMAIL PROTECTED]
ady beaten Microsoft for the most
superior OS.
These are my thoughts only and do not represent anyone else.
Stephan Rex
- Original Message -
From: Richard Salts [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, August 16, 1999 3:16 PM
Subject: [newbie] Linux for home consumers?
1999 10:34 AM
Subject: Re: [newbie] ram problem
On Mon, 9 Aug 1999, Stephan Rex wrote:
Hi
it hangs on the following line:
calibrating delay loop... 397.31 BogoMIPS
Looks like your over clocking yes?
any ideas?
does this process take longer than 10 minutes?
No it's inst
: Monday, August 09, 1999 10:53 AM
Subject: Re: [newbie] booting to GUI
From: Stephan Rex [EMAIL PROTECTED]
I updated some files yesterday, and now linux only boots to the
command line login
prompt and not the KDE login. Some which file and what options do i
need to change to
fix
Hi all,
Yet another problem, at what seems let random times
the cursor disappears. This has only happened since updating the kernel to
2.2.9-27mdk from 2.2.9-19mdk.
All idea welcome
TIA
Stephan
I got a mixed bag of answers but heres what
happened
I was using a lower case m instead of a upper case
M for the ram size
Thus
at lilo prompt:
linux mem=128m should be - linux
mem=128M
or
in /etc/lilo.conf
append = mem=128m should be - append
mem=128M
sorry to try everyone up on
have also tried linux mem=128 at the lilo prompt.This only causes the
bootup sequence to hang. Any ideas?
TIA
Stephan Rex
P.S. I have also "clean" re-installed linux
multiple times in an attempt to fix this problem.
] ram problem
On Sun, 8 Aug 1999, Stephan Rex wrote:
Hi all,
Since upgrading the kernel to 2.2.9-27mdk I can not get linux to
recognise anymore than 65 meg of my 128meg of ram . I fixed the problem when
using 2.2.9-19 by adding the "append = mem=128" to the lilo.conf section
for t
I also have similiar problems with my via-rhine dlink dfe-530 tx NIC. I have
tried
1. using the built in driver but the card can not be found by the probe
during installation
2.downloading the driver source code compiling.
after which I then configure the card and eth0 setting
All of these
Only genuine mandrake-linux distro will have the rego number.Others like
Macmillan press distro which is a distro derrived from the genuine
Mandrake-Linux do not, but are marketed as Mandrake-linux.
regards
Steve
- Original Message -
From: Theo Brinkman [EMAIL PROTECTED]
To: [EMAIL
Hi I am also a newbie
The post sent by pup has a file attachment called "happy99.exe" it may be a
virus. So beware!!
If it turns out not to be a virus I apologise.
regards
Steve
- Original Message -
From: pup [EMAIL PROTECTED]
Sent: Sunday, July 18, 1999 6:39 AM
Subject: Re: [newbie]
Hi James,
After reading the rest of the posts yesterday, it turns out to be a virus. I
did not open it, I just deleted the e-mail, so sorry I can't forward it to
you.
regards
Stephan Rex
- Original Message -
From: James J. Capone [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, July
15 matches
Mail list logo
