John,
Thanks for this followup response!
[EMAIL PROTECTED] wrote:
> I too could not find XF86Config or XFSetup, but I did find that Xconfigurator
> was installed (I'd forgotten about this one but found it when browsing an old
> RH book for clues), but I know nothing about your SiS630 so can't he
On Friday 13 April 2001 12:13, you wrote:
> Thanks for the response!
>
> [EMAIL PROTECTED] wrote:
> Not quite your problem I know, but what I found was
>
> > that installation WAS complete but X server was not, I found this by
> > re-booting which took me to a text login, I then ran Xconfigurator
Thanks for the response!
[EMAIL PROTECTED] wrote:
Not quite your problem I know, but what I found was
> that installation WAS complete but X server was not, I found this by
> re-booting which took me to a text login, I then ran Xconfigurator and was
> able to get the X server running properly and
Not sure if this will help but here goes.
I had a similar problem with Beta3 (tried Xfree 3.3.6 and 4.0.3) when I
tried to install on a laptop. I had used the CDs on the PC with no problem,
but with the laptop they were ejected at the post-install stage (apparently
didn't like the CD Rom) and
During attempts to install Mandrake 7.2 and beta 3 of 8.0 on a new
system, just after I make the selection of XFree (i.e., XFree86 3.3.6 or
3.3.6 with experimental 3D support), I get the following error:
An error occurred
Can't call method "set_active" on an undefined value
X is not configure
