GReetings crew!
I have the misfortune of having a Windoz style multi-purpose device
(actually, it's not that bad), the HP PSC750XI. It is connected by USB
directly to the PC, and was discovered and configured (what seemed to be)
correctly during a recent Mdk8.1 installation- but doesn't
Dear All, I finally have my Epson Stylus Color printing now that I added xpp,
however the quality is horrrible. The colors are fine but the BW has banding
through the letters. I have it configured with the cups+gimp print at
adaptive hybrid, 360 dpi, and photograph. I tried 720 but that did
Dear All,
My Epson Stylus color printer does not work at all now. I installed the new
cups , I did a test page which printed but had alot of bands with the black
white print. I was able to finally use the calibration for Epson but I cannot
print anything other than test pages and
Dear All,
I am sending this again since I sent it hours ago and it never showed up on
the list it seems.
My Epson Stylus color printer does not work at all now. I installed the new
cups , I did a test page which printed but had alot of bands with the black
white print. I was able to finally
On Monday 21 May 2001 21:10, Marcia Waller wrote:
Dear Lanman and All, Thank you for the ftp site and suggestions. I did get
the new cups. How would I check to see which version of cups is running
now?
Run the updates first, and delete your Epson printer, then do
a fresh config for the
Thanks for your input Sean. I have an Epson 777, that I read is essentially
the same as a 680, and had used 680, 760 860 drivers in past with success
(before the addtion of 777). The 777 and others were real bad, while the 680
were only little better. I had never had to play around with
On Sunday 20 May 2001 15:06, Marcia Waller wrote:
On Friday 18 May 2001 20:12, s wrote:
Well, Marcia, I think we ought to quit wasting ink. Seems our Epson
printers are also broken in 8.0. Mandrakesoft is being a little too
quiet about these problems people are having. Anyway, our
Dear Lanman and All, Thank you for the ftp site and suggestions. I did get
the new cups. How would I check to see which version of cups is running now?
Run the updates first, and delete your Epson printer, then do
a fresh config for the printer. Assuming that Mars and Venus (?) are in
proper
On Friday 18 May 2001 20:12, s wrote:
Well, Marcia, I think we ought to quit wasting ink. Seems our Epson
printers are also broken in 8.0. Mandrakesoft is being a little too quiet
about these problems people are having. Anyway, our choices - buy a HP, go
back to 7.2, or do without a
Marcia; I've read about your problem, and I'd like to offer the following
suggestions:
1) Go to the ftp site below, and download ALL the files to a separate folder,
then run the software updater in Mandrake control Center. It's a fast site,
and usually not busy.
On Wednesday 16 May 2001 19:49, Marcia Waller wrote:
Dear All,
I just installed LM 8 after having LM 7.2 for awhile. I am having some
problems getting decent printing quality with my Epson Stylus Color
printer. I am using the cups + gimp printer driver which worked great in
7.2. I have
Marcia,
Is that an ink jet printer? Did you have it out of service very long
while you upgraded from 7.2 to 8.0? Is there any chance a cartridge has
clogged up? Do you have another computer that you can use to test the
printer?
Just some things to check.
Randy Kramer
Marcia Waller wrote:
Well, Marcia, I think we ought to quit wasting ink. Seems our Epson printers
are also broken in 8.0. Mandrakesoft is being a little too quiet about these
problems people are having. Anyway, our choices - buy a HP, go back to 7.2,
or do without a printer until maybe it's fixed in 8.1.
P.S.
Hi Marcia,
I had the same problem with my Epson Stylus Color 600 printer producing
severely banded text output when I upgraded to LM8 from LM7.2.
Moreover, there were also very long and painful pauses during the
printing process - which were absent in LM7.2. I also use the CUPS+GIMP
driver.
Dear All,
I just installed LM 8 after having LM 7.2 for awhile. I am having some
problems getting decent printing quality with my Epson Stylus Color printer.
I am using the cups + gimp printer driver which worked great in 7.2. I have
tried to adjust the resolution, etc, but nothing has helped
Does anyone have the problem of not being able to change the margins on
letter size paper? I have tried changing in inches or centimeters, saving,
and then print immediately, and there does not appear to be any change. Does
cups only recognize root for these changes? Something don't work.
Yes, I have this problem as well. I'm definitely interested in figuring this
one out.
M
On Tuesday 16 January 2001 11:11, you wrote:
Does anyone have the problem of not being able to change the margins on
letter size paper? I have tried changing in inches or centimeters, saving,
and then
17 matches
Mail list logo