I hope some one can point me in the right direction. This card uses the TI
chipset and is recognized on boot but does not load. From dmesg I collected
the following:
PCI: Enabling device :02:00.0 ( - 0002)
PCI: Setting latency timer of device :02:00.0 to 64
acx100_probe_pci:
Pat Patterson wrote:
I hope some one can point me in the right direction. This card uses the TI
chipset and is recognized on boot but does not load. From dmesg I collected
the following:
PCI: Enabling device :02:00.0 ( - 0002)
PCI: Setting latency timer of device :02:00.0 to 64
On Monday 08 November 2004 01:24, Pat Patterson wrote:
I hope some one can point me in the right direction. This card uses the TI
chipset and is recognized on boot but does not load. From dmesg I collected
the following:
SNIP
ERROR: no directory for firmware file specified, ABORTING. Make sure
You need the proprietary firmware for your card from your Windows CD
This HOWTO should help you
http://www.houseofcraig.net/acx100_howto.php
Firmware usually goes in /lib/hotplug/firmware in Mandrake although
the HOWTO mentions a different location.
derek
--
www.jennings.homelinux.net
On 7 Nov 2004 at 18:07, Sevatio wrote:
Have you looked at ndiswrapper?
Yes and have had problems wit it due to ignorance i am sure :) Since
this card has native support in 10.1 I want to try that first
Thanks,
Pat
ps going to jump into what Derrick suggested in another post will
report
