To: [EMAIL PROTECTED]
Subject:RE: [newbie] How to work PCMCIA
Well first check you have rpm kernel-pcmcia-cs loaded.
Next check your pcmcia cards are able to be recognised. In a root
terminal
type
probe
You should then be told which model of pcmcia
On Tuesday 29 January 2002 14:21, you wrote:
I've never managed to get my Psion GoldCard PCMCIA card working. This is a
56K fax modem and 10/100 Ethernet card.
It gets detected at boot and correctly identified, but I then get (type by
hand - any typo's are mine)
cs: cb_config(bus 5)
cs:
PROTECTED]
Subject: Re: [newbie] How to work PCMCIA
On Tuesday 29 January 2002 14:21, you wrote:
I've never managed to get my Psion GoldCard PCMCIA card working. This is
a
56K fax modem and 10/100 Ethernet card.
It gets detected at boot and correctly identified, but I then get (type
, January 27, 2002 12:37 PM
To: [EMAIL PROTECTED]
Subject:RE: [newbie] How to work PCMCIA
Well first check you have rpm kernel-pcmcia-cs loaded.
Next check your pcmcia cards are able to be recognised. In a root
terminal
type
probe
You should
On Tuesday 29 January 2002 16:06, you wrote:
I can do - where do I start looking? For example, if I wanted to force the
card to use IRQ5, where do I set that kind of thing up? (I suck at the PC
config bit!)
well you can take a look at /var/log/syslog if there are any conflicts or
shares.
Unix
experience comes from AIX 6000's and Dynix based Sequent boxes so I'm not to
clued up on IRQ's and PC based stuff.
-Original Message-
From: Harm Bathoorn [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday, January 29, 2002 5:33 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] How to work
Well first check you have rpm kernel-pcmcia-cs loaded.
Next check your pcmcia cards are able to be recognised. In a root terminal
type
probe
You should then be told which model of pcmcia bus adapter you have fitted,
and how many sockets.
Next open Mandrake Control CenteHardwareNetwork cards
Es Diumenge 27 Gener 2002 08:10, en YUKKI va escriure:
Hi all
i wanna use PCMCIA for 3com 5C589C with mandrake 8.1 at Vaio C1XE
Have you tryed to run DrakConf - Network with the card in ?
If that doesn't work, what show the following commands:
# ifconfig
# cardctl ident
Hope that helps...
--
