I have had good experiences with POR 15 gas tank repair kit.
https://www.por15.com/POR-15-Motorcycle-Fuel-Tank-Repair-Kit
I have used it on my 86 NHS tank and an 81 Fiat Spider gas tank.
Its been over 10 years for both an no issues.
I recommend the kit as it comes with heavy duty degreaser, meta
We bought a set on ebay from Vietnam for a 1984 700s and they work. Had to
take lose the exhaust to get room to bolt in but they went in...
On Tuesday, July 21, 2020 at 3:41:43 PM UTC-5 kyl...@gmail.com wrote:
> Well, I had the simpler bars on when I crashed and they did their job. The
> exhau
I forgot two items...
7.1..Remove gear shifter, mark position of shifter on shaft for easy
installation.
7.2..Remove clutch side front foot peg.
On Sunday, July 19, 2020 at 10:26:29 PM UTC-5 David Heffner wrote:
> So my father, son and I decided to tackle this project... Here is what
line up it, it took to two people one
moving the drive shaft at the rubber cover near the universal and the other
holding up the final drive housing.
On Sunday, June 7, 2020 at 4:51:00 PM UTC-5 David Heffner wrote:
> How do you replace the push rod oil seal Honda nighthawk 700S 1984?
> W
I have three 700s bikes two 1986 and one 1984 all of them have the Cyclops
10.0 H4 LED Headlight Bulb
https://www.cyclopsadventuresports.com/Cyclops-100-H4-LED-headlight-bulb_p_192.html#
No problems so far... and excellent headlight for night and day time
visibility.
On Thursday, July 16, 2
Just found them on Partzilla for $8.25 each.
On Sunday, June 14, 2020 at 10:07:20 AM UTC-5, David Heffner wrote:
>
> Does anyone have any key blanks they would like to sell for a 1984 and
> 1986 Nighthawk S CB700SC?
> I would like to buy two of each.
> Only ones I can fin
Does anyone have any key blanks they would like to sell for a 1984 and 1986
Nighthawk S CB700SC?
I would like to buy two of each.
Only ones I can find online are at www.cmsnl.com which is about 54 euros
shipped.
Or can you point me to another source?
Thanks,
David
--
You received this message
How do you replace the push rod oil seal Honda nighthawk 700S 1984?
We were able to remove the old seal put now we cant figure out how to put
the new one in.
Can it be installed from the out side or do I have to take about the case
and install it from the inside?
Can't find the replacement proces
Does any body have a source for the fork bushings on 1986 CB700S.
I believe these are the bushings...
BUSH, GUIDE part #8 on diagram
51414-MJ1-672 old part #
51414-MM4-701
SLEEVE, SHOCK PIPE part #9 on diagram
51415-MJ1-672
--
You received this message because you are subscribed to the Google Gr
My father and I both have 1986 700Ss that appear to be leaking around the
shifter.
I would like to confirm the procedure for replacing the shifter seal.
1...Drain engine oil
2...Pull the plastic cover
3...Pull linkage off the shifter shaft
4...Pull the shift shaft (does it come out easily, is it k
No expreience with Apex.
I have used Galfer lines http://galferusa.com/ for my Nighthawk S, my
father's Nighthawk S and a Kawasaki Ninja that I previously owned.
On the Nighthawks I replaced both brake and clutch lines with the Galfer SS
lines.
I know they will do custom lines and they have a fa
11 matches
Mail list logo