Before I aired up the tires on my NH650, the center stand was a struggle.
Proper inflation and the center stand was much easier. Tires can be a
factor.
On Thursday, August 25, 2016 at 7:34:40 PM UTC-4, Brian wrote:
>
> I have a ST1100 that when I got the bike the previous owner put lower
> prof
I have a ST1100 that when I got the bike the previous owner put lower profile
tires on it. I think so he could stand flat footed when on the bike. These
tired made it almost impossible to put the bike onto the center-stand. I
replaced the tires with eom specs and magic, the bike was easy as pi
HARD means pulling all the muscles on your right side.
Dave
On 25 August 2016 at 19:30, Kyle Munz wrote:
> Just keep the bike centered, push down the center stand until both feet
> touch the ground, then with your right hand grab the rail under the seat
> and lift up while pushing down HARD on
Just keep the bike centered, push down the center stand until both feet
touch the ground, then with your right hand grab the rail under the seat
and lift up while pushing down HARD on the center stand.
-Kyle
On Thu, Aug 25, 2016 at 5:27 PM, Braincloud
wrote:
> Hi,
>
> I've recently purchased a
Hi,
I've recently purchased a NH 650 and need advice on the technique of using the
center stand. Â What's the secret?
--
You received this message because you are subscribed to the Google Groups
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from
Do you have the stock or an aftermarket exhaust?
Kurt
On Aug 23, 2014 10:53 AM, "Shawn Meharg" wrote:
> I see where the spring attaches to the stand, but where does the opposite
> end of the hook attach. Am I missing a part?
>
> --
> You received this message because you are subscribed to the G
I see where the spring attaches to the stand, but where does the opposite
end of the hook attach. Am I missing a part?
--
You received this message because you are subscribed to the Google Groups
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails fro
Yes. There is a tab welded to the LH muffler that has an indexing hole for the
center stand to rest in when up.
Thank you,
Ross
-Original Message-
From: "Greg Holuban"
Sent: 8/7/2013 3:22 PM
To: "nighthawk_lovers@googlegroups.com"
Subject: Re: [Nighthawk Lovers] C
m: "Hawaii Sean"
Sent: 8/7/2013 1:34 PM
To: "nighthawk_lovers@googlegroups.com"
Subject: [Nighthawk Lovers] Center Stand for 1996 750
Does anyone have directions for installing a center stand on a 90's 750? I
finally bought one from Pinwall one eBay. It arrived yes
The Chilton manual has instructions.
Thank you,
Ross
-Original Message-
From: "Hawaii Sean"
Sent: 8/7/2013 1:34 PM
To: "nighthawk_lovers@googlegroups.com"
Subject: [Nighthawk Lovers] Center Stand for 1996 750
Does anyone have directions for installing a center sta
Does anyone have directions for installing a center stand on a 90's 750? I
finally bought one from Pinwall one eBay. It arrived yesterday and I
haven't looked at the bottom of the bike. If not instructions can someone
take a picture how the spring is attached to the bike on one that's
instal
> Sent via BlackBerry by AT&T
> --
> *From: * "Pastor Ron"
> *Sender: * nighthawk_lovers@googlegroups.com
> *Date: *Sat, 20 Apr 2013 21:27:00 -0500
> *To: *
> *ReplyTo: * nighthawk_lovers@googlegroups.com
> *Subject: *RE: [Nighthawk Lovers] Center stand stabili
ctually was a 2 person job.
Sent via BlackBerry by AT&T
-Original Message-
From: "Pastor Ron"
Sender: nighthawk_lovers@googlegroups.com
Date: Sat, 20 Apr 2013 21:27:00
To:
Reply-To: nighthawk_lovers@googlegroups.com
Subject: RE: [Nighthawk Lovers] Center stand stability...how to
I can't speak to all years of the ST but my 2006 is pretty simple and I
think easier than the NH.
https://www.youtube.com/watch?v=k0aLO8RpYbI
Ron
From: nighthawk_lovers@googlegroups.com
[mailto:nighthawk_lovers@googlegroups.com] On Behalf Of Brian Collett
Sent: Saturday, April 20, 2013 5:34 PM
2011 7:51 PM
To: nighthawk_lovers@googlegroups.com
Subject: [Nighthawk Lovers] Center Stand Install & Usage HOWTO
Just installed a center stand on my '92 CB750. Assembly took about 10 minutes,
getting that frakin' spring on took about 2 hours (ended up using a vice grip
on
t
Just installed a center stand on my '92 CB750. Assembly took about 10 minutes,
getting that frakin' spring on took about 2 hours (ended up using a vice grip on
the spring-side end and pulling until it was just over the stand attachment
point, and then letting the vice grip go and hoping it caug
I have one for a '79 xs 1100 special
On May 8, 2011 8:36 PM, "Lie Njie"
wrote:
> Anyone have a center stand they want to sell? Anyone know where to get one
> cheaper than the $150 OEM set they sell at bikebandit.com?
>
> Thanks!
> +Lie
>
> --
> You received this message because you are subscribed
Anyone have a center stand they want to sell? Anyone know where to get one
cheaper than the $150 OEM set they sell at bikebandit.com?
Thanks!
+Lie
--
You received this message because you are subscribed to the Google Groups "Nighthawk
Motorcycle Lovers!" group.
To post to this group, send e
If the person is still looking for the center stand-I bought mine last
fall-paid $102 plus shipping from Service Honda in Hammond, IN
DON SIMPSON
93' 750 NIGHTHAWK
West Central IN
___
my 99 250 dosent have a center stand, i wish it did... any sugestions on how
to do one on the cheep???
On Fri, Feb 12, 2010 at 12:33 PM, Matt wrote:
> I see a number of 80's center stands on ebay. But nothing 91 and up.
> Will an 80's center stand fit my 03?
>
> Cheers,
>
> Matt
>
> --
> You rec
I see a number of 80's center stands on ebay. But nothing 91 and up.
Will an 80's center stand fit my 03?
Cheers,
Matt
--
You received this message because you are subscribed to the Google Groups
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to nighthawk_lov...@google
I recently purchased a 2003 Nighthawk 750 that has a 4 into 1 Vance
and Hines exhaust system. I want to install a center stand but am not
sure if the after market exhaust system will prevent me from
installing one. Does anyone know if the Vance and Hines will work with
a centerstand?
Thanks
--~-
22 matches
Mail list logo