My creative tool was using a jewlers file to make an offset wrench out
of a coat hanger to get that darn #2 pilot screw adjusted. After
purchasing a $50 special tool that didn't fit and subsequently
destroying it trying to make it smaller, a free solution proved best.
On 5/23/10, Kim Paddock wrot
I had mine apart too. It needed a new rubber gasket...no big deal.
From: Kyle Munz
To: nighthawk_lovers@googlegroups.com
Sent: Sat, May 22, 2010 1:23:38 PM
Subject: Re: [Nighthawk Lovers] Petcock Solution
Buddy of mine had a similar issue. We disassembled the
Buddy of mine had a similar issue. We disassembled the petcock only to find
that the previous owner had removed the spring behind the diaphragm. It's
nice when the fix is simple, and cheap ;)
-Kyle
On Sun, May 23, 2010 at 8:57 AM, Dennis wrote:
> Good tip! - thanks, Jaybird
>
> Dennis G
> - C
Good tip! - thanks, Jaybird
Dennis G
- Christchurch
-Original Message-
From: nighthawk_lovers@googlegroups.com
[mailto:nighthawk_lov...@googlegroups.com] On Behalf Of jaybird...@aol.com
Sent: 22 May, 2010 11:48
To: nighthawk_lovers@googlegroups.com
Subject: [Nighthawk Lovers] Petcock S