Peter Münster schrieb am 15.07.2020 um 14:55:
Hi,
What is the right way please to get normal white-space after a section in
columns, i.e. not too much?
Example, that shows the problem:
--8<---cut here---start->8---
\starttext
\startsection[title=Space
Hi,
What is the right way please to get normal white-space after a section in
columns, i.e. not too much?
Example, that shows the problem:
--8<---cut here---start->8---
\starttext
\startsection[title=Space is ok here]
\input tufte
\stopsection
\startc
idea what causes the problem here without looking at the code
(I guess ConTeXt tries to prevent a line break after the title) but this
works.
\dontleavehmode\blank
Wolfgang
___
If your question is of interest to others
> Thanks for your help.
> Fabrice
>
> \setupenumerations
> [before={\blank},
>after={\blank},
>alternative=serried,
>title=yes,
>titleleft=,
>titleright=,
>prefix=yes,
>prefixsegments=chapter,
>way=bychapter,
>titlestyle=b
; In my lessons, I often have to include tables, figures, ... in definitions,
> theorems ...
> With the context engine it works fine but not with lmtx.
> Thanks for your help.
> Fabrice
>
> \setupenumerations
> [before={\blank},
>after={\blank},
>alternati
Hello,
In my lessons, I often have to include tables, figures, ... in definitions,
theorems ...
With the context engine it works fine but not with lmtx.
Thanks for your help.
Fabrice
\setupenumerations
[before={\blank},
after={\blank},
alternative=serried,
title=yes,
titleleft
; >
> > (...tail calls...)
> >
> > 1 \usemodule[gnuplot]
> > 2
> > 3 % write a script for gnuplot
> > 4 >> \startGNUPLOTscript[sin]
> > 5plot sin(x)
> > 6 \stopGNUPLOTscript
> > 7
> > 8 %
10
mtx-context | fatal error: return code: 256
Does the gnuplot module need adjustments?
No, i messed up something ... will be fixed tomorrow
Do you have lmtx installed? It has nicer gnuplot support:
m-gnuplot-demo.gp :
set format xy "$%g$"
set title 'This is a
On 7/13/2020 11:27 AM, Julian Fox wrote:
That's obviously much simpler! I was under the impression that 'title'
was only for use in front matter, or that if I used it elsewhere, then
it didn't show the number but that the next use of 'chapter' would
increment as i
That's obviously much simpler! I was under the impression that 'title' was
only for use in front matter, or that if I used it elsewhere, then it
didn't show the number but that the next use of 'chapter' would increment
as if it had a number. I was wrong!
On Mon
> Am 13.07.2020 um 02:23 schrieb jbf :
>
> Hi there,
>
> I have a situation where numbered chapters are occasionally interspersed with
> unnumbered chapters, so, for example, it might be:
>
> 1 First chapter title with number
>
> second chapter title unnumber
Oh, I see. Thanks!
Jairo :)
El dom., 12 de jul. de 2020 a la(s) 22:56, Wolfgang Schuster (
wolfgang.schuster.li...@gmail.com) escribió:
> Jairo A. del Rio schrieb am 12.07.2020 um 22:31:
> > I've realized ConTeXt now puts the section label and section number
> > above t
Jairo A. del Rio schrieb am 12.07.2020 um 22:31:
I've realized ConTeXt now puts the section label and section number
above the section title whe alternative=middle is set. How to disable
this behavior so one can have a section label and number next to a
centered section title? Thank y
Hi there,
I have a situation where numbered chapters are occasionally interspersed
with unnumbered chapters, so, for example, it might be:
1 First chapter title with number
second chapter title unnumbered
2 Second chapter title with number
3 Third chapter title with number
I've realized ConTeXt now puts the section label and section number above
the section title whe alternative=middle is set. How to disable this
behavior so one can have a section label and number next to a centered
section title? Thank you in advance.
Sincerely,
Fabrice Couvreur schrieb am 11.07.2020 um 15:02:
Hello,
I would like to reduce the space between the numbering and the title of
the chapters, sections and subsections.
I would also like to have this:
1 My first chapter
1.1 My first section
1.1.1 My first subsection
You can use
\setuplist
Hello,
I would like to reduce the space between the numbering and the title of the
chapters, sections and subsections.
I would also like to have this:
1 My first chapter
1.1 My first section
1.1.1 My first subsection
\setuplist
[chapter]
[style=bold,width=10mm]
\starttext
\placelist
}}
\setuphead [chapter] [command=\MyChapter]
\chapter{Chapter title}
which gives me a chapter number (without the word 'Chapter') and 1cm
below it the chapter title, e.g.:
1
My chapter title
But when I transfer this to the actual tex file I am working with, I
lose the chap
]
\chapter{Chapter title}
which gives me a chapter number (without the word 'Chapter') and 1cm
below it the chapter title, e.g.:
1
My chapter title
But when I transfer this to the actual tex file I am working with, I
lose the chapter number. Admittedly, there is more co
I have found my own answer to the question I asked earlier:
\setuppapersize[A4]
\setuplabeltext [en] [chapter=~]
\define[2]\MyChapter
{\framed[frame=off,width=broad,align=middle]{#1\blank[2cm]#2}}
\setuphead [chapter] [command=\MyChapter]
\chapter{Chapter title}
It was simply a matter of
l.com>:
> >
> > Hello,
> > I want a vertical space between the label and the chapter title: is this
> the right way to proceed ?
>
> Why not? It seems to work. What’s your problem?
>
> BTW I’d set \mainlanguage[fr]
>
> Hraban
>
> __
Hi, I am using
\setuppapersize[A4]
\setuplabeltext [en] [chapter=~]
\define[2]\MyChapter
{\framed[frame=off,width=broad,align=middle]{#1\\#2}}
\setuphead [chapter] [command=\MyChapter]
\chapter{Chapter title}
to successfully achieve the following result:
1
> Am 07.07.2020 um 19:27 schrieb Fabrice Couvreur :
>
> Hello,
> I want a vertical space between the label and the chapter title: is this the
> right way to proceed ?
Why not? It seems to work. What’s your problem?
BTW I’d set \mainlangu
Hello,
I want a vertical space between the label and the chapter title: is this
the right way to proceed ?
Thank you.
Fabrice
\setuplabeltext[chapter=Chapitre~]
\unexpanded\def\Title#1#2{\framed[frame=off,width=fit,align=flushleft]{#1\blank#2}}
\setuphead
[chapter]
[style=\bfc,
command
t=0pt,width=max,frame=off]
> \getinlineuserdata
> \stopframedtext}
> \stopsetups
>
> \showframe
> \starttext
> \startuserdata[margintext]
> {\bf Remarque — }\input ward
> \stopuserdata
> \startuserdata[margintext]
> \externalfigure[dummy][width=\rightma
\stopframedtext}
\stopsetups
\showframe
\starttext
\startuserdata[margintext]
{\bf Remarque — }\input ward
\stopuserdata
\startuserdata[margintext]
\externalfigure[dummy][width=\rightmarginwidth]
\stopuserdata
\startchapter[title=First chapter]
\dorecurse{2}{\input knuth}
\stopchapter
\stoptext
> On 6
=high]}
\startuserdata[margintext]
\input ward
\stopuserdata
\marginfigure{\externalfigure[dummy][width=\rightmarginwidth,location=high]}
\startchapter[title=First chapter]
\dorecurse{2}{\input knuth}
\stopchapter
\stoptext
Le jeu. 2 juil. 2020 à 19:04, Marco Patzer a écrit :
> On Thu, 2
={\switchtobodyfont[9pt]},
width=\rightmarginwidth,
align={flushleft,broad}]
{{\bf Remarque — }\getinlineuserdata}
\stopsetups
\showframe
\starttext
\startuserdata[margintext]
\input ward
\stopuserdata
\marginfigure{\externalfigure[dummy][width=\rightmarginwidth]}
\startchapter[title=First chapter
/node-syn.lua:435: attempt to
index a nil value (upvalue 'filehandle')
1 >> \newdimen\LWidth
2 \newdimen\LHeight
3 \newdimen\LDistanceX
4 \newdimen\LDistanceY
5
6 \LWidth=75mm
7 \LHeight=30mm
8 \LDistanceX=0mm
9 \LDistanceY=0mm
1
broken or not good enough, he doesn't hesitate to fix
it or improve it in the best way he can see. This is good for the
software in that it is constantly improving in every direction,
but it does also make it a bit more of a challenge to document,
and a bit more of a challenge to find someone
On 6/24/2020 11:01 PM, Garulfo wrote:
Hi,
I try to update and to fill the french content of mult-def.lua.
Currently, I have an updated "mult-def.lua" file. 3 questions :
1/ which commands should be executed in order to make the new local
interface effective with context
context --make fr
Hi,
I try to update and to fill the french content of mult-def.lua.
Currently, I have an updated "mult-def.lua" file. 3 questions :
1/ which commands should be executed in order to make the new local
interface effective with context
2/ which commands should be executed in order to build a l
(can better be done global)
fonts > bodyfont '11.2pt' is defined (can better be done global)
fonts > defining > font with asked name 'IBMPlexSans-regular' is not
found using lookup 'file'
fonts > defining > unknown fo
Thanks Taco!
I added this and Hans' explanations to the wiki:
https://wiki.contextgarden.net/variable_color
but could not set a better title for that page such as « Variable arrays of
colors, pens, paths ».
Best regards: Otared
> On 22 Jun 2020, at 09:28, Taco Hoekwate
\setuphead[chapter][before={\blank[4*big]}]
\starttext
\startchapter[title={No space above this chapter}]
chapter text etc
\stopchapter
\setuphead[chapter][before={\blank[4*big,force]}]
\startchapter[title={Chapter with spacing but out of line with grid}]
chapter text etc
\stopchapter
\setuphead
ay to do it or is there a more elegant way that I
am missing?
Many thanks
James
\setuphead[chapter][before={\blank[4*big]}]
\starttext
\startchapter[title={No space above this chapter}]
chapter text etc
\stopchapter
\setuphead[chapter][before={\mbox{}\blank[4*big]}]
\startchapter[title={Ch
][2][a, packed, 1*broad][left=(, right=), stopper=]
>
> \starttext
>
> \startsection{First Section}
\startsection[title={...}]
The first entry uses the "before" value while inner entries use "inbetween".
\starttext
\setupitemgroup
[itemize][1]
[ befo
Thanks Wolfgang!
1. Where can this solution be found? (wiki or elsewhere)
2. I'm guessing that you're saying that my \startsection should have
[title={...}] instead of what I gave?
-Original Message-
From: ntg-context [mailto:ntg-context-boun...@ntg.nl] On Behalf O
]
\setupitemgroup[mdshw][1][n]
\setupitemgroup[mdshw][2][a, packed, 1*broad][left=(, right=), stopper=]
\starttext
\startsection{First Section}
\startsection[title={...}]
The first entry uses the "before" value while inner entries use "inbetween".
\starttext
\setupite
ch has a
corresponding "i3-stop", or "ii22-synopsis-start" (with the
corresponding closing annotation).
To make easier to identify these annotations, they all share the same
title. As contents, all these text annotations have the page number.
From the generated PDF document, I need to r
page number i instead of ii. It seems to have something to do
> > with the use of makeup. I was using it to create a vertically centered
> > title page. Is there a better way of doing this which will give the
> > correct page numbers?
> >
> > Best,
> >
> >
Jack Steyn schrieb am 14.06.2020 um 16:46:
Hi,
I'm not sure why the following MWE produces a document where page 2
has the page number i instead of ii. It seems to have something to do
with the use of makeup. I was using it to create a vertically centered
title page. Is there a better w
Hi,
I'm not sure why the following MWE produces a document where page 2 has the
page number i instead of ii. It seems to have something to do with the use
of makeup. I was using it to create a vertically centered title page. Is
there a better way of doing this which will give the correct
e{myindent}#1.}
\defineenumeration[sats][
text={Sats},
style={\em},
title=yes,
titlestyle=,
width=fit,
headstyle={\smallcaps\setcharacterkerning[sats]},
headcommand={\vakuum},
number=yes,
alternative=serried,
indenting={yes,\measure{myindent}},
]
\defineenumeration[SATS][sats][
headstyle=\smallc
. After all, only the title and
caption text needs to be translated.
I tried doing this but in the case of \startchapter using a \doifmode
but the PDF bookmarks text is not correctly generated.
You need
\enabledirectives[references.bookmarks.preroll]
in your setup files to get the correct text
of other modes using \startmode and \doifmode. Duplication is unavoidable but it would make sense to try and re-use the existing structural elements such as \startsection \startsubsection \placefigure etc as much as possible. After all, only the title and caption text needs to be translated.I tried
is always fine.
See MWE:
---
\setupinteraction[state=start]
\usebtxdataset[sample.bib]
\usebtxdefinitions[apa]
\starttext
\input tufte \cite[hh2010a]
\input zapf \cite[hh2010a]
\title{Reference List}
\placelistofpublications[criterium=all]
\title{Bibliography}
\placelistofpublications[metho
]
\defineexternalfigure[dummy]
\starttext
\startplacefigure[location=left,number=no,title={}]
\externalfigure[dummy][width=.45\textwidth]
\stopplacefigure
\dontleavehmode % if this is commented out then the text and the
figure are placed on top of each other
\startframedtext[frame=off]
\input
]
\defineexternalfigure[dummy]
\starttext
\startplacefigure[location=left,number=no,title={}]
\externalfigure[dummy][width=.45\textwidth]
\stopplacefigure
\dontleavehmode % if this is commented out then the text and the
figure are placed on top of each other
\startframedtext[frame=off]
\input
\startplacefigure[location=left,number=no,title={}]
\externalfigure[dummy][width=.45\textwidth]
\stopplacefigure
\dontleavehmode % if this is commented out then the text and the figure are
placed on top of each other
\startframedtext[frame=off]
\input ward.tex
\stopframedtext
\stoptext
%% end
nalfigure[dummy]
>
> \starttext
> \startplacefigure[location=left,number=no,title={}]
> \externalfigure[dummy][width=.45\textwidth]
> \stopplacefigure
> \dontleavehmode % if this is commented out then the text and the figure are
> placed on top of each other
> \sta
certain
number of cases where such combinations are used, I woul dlike to be sure to
not make a mistake by changing all the instances… Here is an example:
%% begin figure-framedtext.tex
\useMPlibrary[dum]
\defineexternalfigure[dummy]
\starttext
\startplacefigure[location=left,number=no,title
>> wrote:
I am attempting to get the word 'Chapter' to appear in the Chapter
title, followed by its number, and I attempted to do it simply with:
\setupheadtext[chapter=Chapter]
\setuphead
[chapter]
[header=empty]
What I get is simply the number, e.
7;Chapter' to appear in the Chapter
> title, followed by its number, and I attempted to do it simply with:
>
> \setupheadtext[chapter=Chapter]
> \setuphead
>[chapter]
>[header=empty]
>
> What I get is simply the number, e.g. 1 My first chapter, 2 My second
>
I am attempting to get the word 'Chapter' to appear in the Chapter
title, followed by its number, and I attempted to do it simply with:
\setupheadtext[chapter=Chapter]
\setuphead
[chapter]
[header=empty]
What I get is simply the number, e.g. 1 My first chapter, 2 My second
c
]
[after=\directsetup{chapter:after}]
% \setuphead
% [title]
% [after={\blank[...]}]
\starttext
\dorecurse{10}
{\chapter{Chapter #1}
\input knuth}
\stoptext
Wolfgang
___
If your question is of interest to others
standard chapter head.
Julian
On 3/6/20 12:58 am, Wolfgang Schuster wrote:
jbf schrieb am 02.06.2020 um 11:41:
Hi list,
I am attempting to achieve, for every second chapter, to have only
one line of space between the chapter title and the text that follows.
I looked at the following
jbf schrieb am 02.06.2020 um 11:41:
Hi list,
I am attempting to achieve, for every second chapter, to have only one
line of space between the chapter title and the text that follows.
I looked at the following example in the wiki:
\setuppapersize[A6][A6]
\setupbodyfont[8pt]
\def
Hi list,
I am attempting to achieve, for every second chapter, to have only one
line of space between the chapter title and the text that follows.
I looked at the following example in the wiki:
\setuppapersize[A6][A6]
\setupbodyfont[8pt]
\def\MyChapterCommand#1#2%
{\vbox to 4cm\bgroup
es as well but the input is different because
everything is hidden.
\starttext
\startplacefigure[title={A combination of three figures}]
\startcombination[3*1]
{\externalfigure[image-1.pdf][width=4cm]}{a}
{\externalfigure[image-2.pdf][width=4cm]}{b}
{\externalfigure[im
Otared Kavian schrieb am 01.06.2020 um 14:30:
Hi all,
Is it possible to write the individual captions for each element of a
combination of floats above it, while the caption for the figure appears below?
\startplacefigure[title={A combination of three figures}] % this title appears
below the
tared
> On 1 Jun 2020, at 14:51, Tomas Hala wrote:
>
> Hi Otared,
>
> maybe there is a better, more system solution, but the following works:
>
> \setupcaptions[figure][location=bottom]
> \startplacefigure[title={A combination of three figures}] % this titl
Hi Otared,
maybe there is a better, more system solution, but the following works:
\setupcaptions[figure][location=bottom]
\startplacefigure[title={A combination of three figures}] % this title appears
below the figure
\startcombination[3*1]
{\framed[width=4cm]{a}}{\externalfigure[image-1
Hi all,
Is it possible to write the individual captions for each element of a
combination of floats above it, while the caption for the figure appears below?
\startplacefigure[title={A combination of three figures}] % this title appears
below the figure
\startcombination[3*1
image empty
}{%
\directsetup{noheader}
\vbox{%
{\ChapterFont\structurevariable{title}\par}%
\blank[big]
\externalfigure[img/\structureuservariable{image}][width=0.8\textwidth]\par
}
\doifnot{\structureuservariable{vita}}{}{% if vita
\vfill
\vbox
, suppose you wanted to use the image defined as part of
> `\startchapter` as the background image of the _current_ page, then you
> could access the value of the \structureuservariable. For example,
>
> \startchapter[title=whatever][image=filename]
>
> \structureuservariable{i
7;t have to worry about it. See
https://wiki.contextgarden.net/System_Macros/Key_Value_Assignments#Multi-pass_data
for more details.
Now, suppose you wanted to use the image defined as part of `\startchapter` as
the background image of the _current_ page, then you could access the value of
the \s
]
\starttext
\chapter[title=My first,
reference=First]
\page
in chapter 1 on page \getreference[realpage][First]
\stoptext
Create a new reference command with
\definereferenceformat [getrealpage] [type=realpage]
and use it (e.g. \getrealpage[First]) to show the page number.
Wolfgang
=\structureuservariable{image}]}]
\setupexternalfigure[location=default]
\starttext
\startchapter [title={Tufte}] [image=cow]
\dorecurse{4}{\samplefile{tufte}}
\stopchapter
\startchapter [title={Knuth}] [image=mill]
\dorecurse{8}{\samplefile{knuth}}
\stopchapter
\startchapter [title={Zapf}] [image=hacker
]
\setupbackgrounds[page][background=color,backgroundcolor=blue,]
\page[empty,right]
\popbackground}
\stopsetups
\setuphead
[chapter]
[
page=yes,
before=\directsetup{chapter:before},
]
\setupexternalfigure[location=default]
\starttext
\startchapter
[title={foo
,backgroundcolor=blue,]
\page[empty,right]
\popbackground}
\stopsetups
\setuphead
[chapter]
[
page=yes,
before=\directsetup{chapter:before},
]
\setupexternalfigure[location=default]
\starttext
\startchapter
[title={foo}]
\dorecurse{2}{\input tufte \par}
\stopchapter
\startchapter
k
\appendtoks
\setuevalue{\currentlook}{\module_look_do{\currentlook}}
\to \everydefinelook
\unexpanded\def\module_look_do#id%
{\edef\currentlook{#id}%
\dosingleempty\module_look_do_do}
\def\module_look_do_do[#parms]#content%
{\dontleavehmode
\begingroup
\iffirstargument
\setupcurren
On 5/25/2020 2:40 PM, Bruce Horrocks wrote:
I can't be the first to have wanted to try something like this. Is it possible
to use tabulate (or any of the table types) to customise the layout of the
table of contents?
I'd like 4 columns - title, subject, author and page - where s
I can't be the first to have wanted to try something like this. Is it possible
to use tabulate (or any of the table types) to customise the layout of the
table of contents?
I'd like 4 columns - title, subject, author and page - where subject and author
will (eventually) be
Hello Garulfo,
thanks for the great work!
Two suggestions:
1. Obsolete manuals: Could their pictures be scratched somehow? One will
see on the first sight that he is to investigate "no-more-valid" stuff.
2. Could you add a "download all manuals" hlink/button next to
On 5/20/2020 4:55 PM, cont...@vivaldi.net wrote:
2. Could you add a "download all manuals" hlink/button next to each
(sub)title to download appropriate manuals as .zip, so to get:
most manuals are in the di
[mycommand]
\setelementnature[mycommand][mixed]
\starttext
\startsection[title={Sample document}]
\startparagraph
This is a paragraph
\stopparagraph
\startelement[mycommand][name=whatever]
This is mycommand
\stopelement
\stopsection
\stoptext
```
gives
```
http://www.w3.org/1998/M
ttext
\startsection[title={Sample document}]
\startparagraph
This is a paragraph
\stopparagraph
\startelement[mycommand][name=whatever]
This is mycommand
\stopelement
\stopsection
\stoptext
```
Using `\dostarttagged{mycommand}{whatever}` does export as ``, and looking at the code, I don'
[title={Sample document}]
\startparagraph
This is a paragraph
\stopparagraph
\startmycommand
This is mycommand
\stopmycommand
\stopsection
\stoptext
```
If I compile using `context --trackers=structures.tags filename`, I get
```
backend > tags > U+0031:1 =>
Hi,
What is needed to enable export of user defined macros? Consider the following
example:
```
\def\startmycommand{\dostarttagged{mycommand}\empty}
\def\stopmycommand {\dostoptagged}
\setupbackend[export=xml, level=0]
\starttext
\startsection[title={Sample document}]
\startparagraph
/context/base/mkiv/cont-yes.mkiv: ! I
can't find file
`x://Users/MMi/Akce/Stechovice-I-etapa.RDS/Projekt.RDS/P.Prac/SO_251/TZ/14-001-TZ.mkiv'.
l.8 }
l.97 \getvalue{clf_processjob}
% from cont-run.lua
1 %D \module
2 %D [ file=cont-yes,
can use
a project file where you load all environments and load
then the project file in your product and component files.
##chapter-4-seconde.tex##
\startcomponent chapter-4-seconde
Add here
\environment ...
or
\project ...
\startchapter[title=]
...
\stopchapter
\stopcomponent
Wolfgang
Hi Aditya,
It does not work ; the compilation encounters errors with each command that
I created. I guess it comes from the components.
Fabrice
##chapter-4-seconde.tex##
\startcomponent chapter-4-seconde
\startchapter[title=]
...
\stopchapter
\stopcomponent
Le jeu. 7 mai 2020 à 16:01, Aditya
different as soon as
xtable tries to place them …
Cheers
\startplacetable[reference=tab1,title={A table},location=split]
\startxtable[split=repeat]
\startxrow
\startxcell hi \stopxcell
\stopxrow
\stopxtable
\stopplacetable
> On 22 Apr 2020, at 21:10, Benjamin Buchmuller
> wrote:
>
>
After trying Hraban's two suggestions to resolve the problem of a
caption ('title=') for an image across a two-page spread (and I have
tried a variety of adaptations of those two possible solutions), I still
have not resolved the issue.
To repeat what Hans gave me, to res
simplifies matters).
>
> But in my case the title is a lengthy sentence, rather than the 4-word 'This
> is a cow'. And even though I have been able to split the line, e.g.
> title={this is my very, very, very,\\ very etc. etc. long title}, what
> happens is that part of the capt
The following excellent solution (see below) to a 2-page spread of an
image was given me by Hans (I had been completely unaware of the command
\startspread. It appears to be recent and undocumented, but it certainly
simplifies matters).
But in my case the title is a lengthy sentence, rather
Hello list,
Looks like lmtx adds extra vertical space after heads.
Compare those two MWE:
\setuppapersize [S4]
\setuphead [subject] [after={}]
\starttext
\startsubject[title={blabla}]
\input knuth
\stopsubject
\stoptext
\setuppapersize [S4]
\setuphead [subject] [after={}]
\starttext
[termes,14pt]
\starttext
{\bfc Cheesy double boxed title}
\stoptext
end example
while your complexer version loads the bodyfont after \starttext
(\startcomponent acts here as \starttext)
begin example
\starttext
\setupbodyfont[termes,14pt]
{\bfc Cheesy double boxed title}
\stoptext
%
etuplayout[location=middle, marking=on]
\setupinteraction
[title={TestDoc},
author={Anon}]
\setupbackend
[format=PDF/X-1a:2003,
intent={ISO Coated v2 300\letterpercent\space (ECI)}]
\setupinteractionscreen[width=max,height=max]
\startluacode
moduledata.mystuff={}
respecify_pdf_boxes
lacefigure[location=here,title={This is a cow!}]
\externalfigure[cow.pdf][height=\textheight]%
\stopplacefigure
\stopspread
\setuppagenumbering[state=start]
\stoppostponing
\dorecurse{10}{\input tufte \par}
Hi,
I would like to reference a table of the following structure.
\starttext
\startplacetable[reference=tab1,title={A table},location=split]
\startxtable
\startxrow
\startxcell hi \stopxcell
\stopxrow
\stopxtable
\stopplacetable
In Table \in[tab1]
\stoptext
It has [location=split], which I
On 4/22/20 2:44 AM, jbf wrote:
> A simple question, but I have not found an answer to it as yet:
>
> \completecontent does everything it is supposed to, including providing
> the title 'Contents' on the ToC page, but it also gives me as the first
> line in the ToC:
>
&
> Am 22.04.2020 um 02:44 schrieb jbf :
>
> A simple question, but I have not found an answer to it as yet:
>
> \completecontent does everything it is supposed to, including providing the
> title 'Contents' on the ToC page, but it also gives me as the first line
A simple question, but I have not found an answer to it as yet:
\completecontent does everything it is supposed to, including providing
the title 'Contents' on the ToC page, but it also gives me as the first
line in the ToC:
Contents 0
In fact the ToC appears on page 1, but
xml:section
>
> \doifelse{\xmlatt{#1}{id}}{\selectedtopic}
> {\setvariable{xml}{beforesection}{conditional}}
> {\setvariable{xml}{beforesection}{}}
>
> \startsection[title={\xmlatt{#1}{id}}]
> \xmlflush{#1}
> \stopsection
>
>
\xmlregistersetup{xml:initialize}
\startxmlsetups xml:doc
\xmlflush{#1}
\stopxmlsetups
\startxmlsetups xml:section
\startsection[title={\xmlatt{#1}{id}},
beforesection={\doif{\xmlatt{#1}{id}}{\selectedtopic}
{conditional}}]
\xmlflush{#1}
\doif
\xmlflush{#1}
\stopxmlsetups
\startxmlsetups xml:section
\startsection[title={\xmlatt{#1}{id}},
beforesection={\doif{\xmlatt{#1}{id}}{\selectedtopic}
{conditional}}]
\xmlflush{#1}
\doif{\xmlatt{#1}{id}}{\selectedtopic}{conditional}
\stopsection
y
It uses \wrappedcurrentconstruction. However, it only prints the counter
label and the counter name. What if I need the text enclosed by braces in
the frame header too? E. g. \starttheorem[thm1]{Residue theorem} so the
framed title includes "Residue theorem" also. Thank you in advance.
ed by braces in
the frame header too? E. g. \starttheorem[thm1]{Residue theorem} so the
framed title includes "Residue theorem" also. Thank you in advance.
___
If your question is of interest to others as well
1401 - 1500 of 7580 matches
Mail list logo
