On 10/11/22 16:18, Manuel Wolfshant wrote:
I mean, it keeps the systems up as long as line power stays off, can it then
fail when the power returns???
Nope
Thanks.
OTOH I would not be surprised if an 8 yrs old UPS is defective.
No, I'm not suprised.
(Although I have a similar one, whic
On 10/11/22 16:02, Roger Price wrote:
On Tue, 11 Oct 2022, Andrea Venturoli via Nut-upsuser wrote:
On 10/11/22 15:17, Greg Troxel wrote:
I suggest an experiment:
Thanks.
This is planned, but I can't be at this site before some weeks.
When you get to the site, you might be able to spe
On 10/11/22 15:48, Roger Price wrote:
ups.firmware: UPS 08.8 / ID=18
ups.mfr: American Power Conversion
ups.mfr.date: 2014/06/20
How old is the battery?
~2.5 years.
The above date was probably not updated when it was changed.
Could a faulty battery pack produce this???
I mean, it keeps the
On 10/11/22 15:17, Greg Troxel wrote:
I suggest an experiment:
disconnect the USB cable to the NUT computer
turn off power for 5 minutes
turn power back on
and see what happens
Thanks.
This is planned, but I can't be at this site before some weeks.
bye
av.
Hello.
I've got an APC SmartUPS 1500: it's connected via USB and I'm using the
usbhid-ups driver. This used to work properly until recently.
Now, when power goes out it keeps on going on battery potentially for
several minutes, but, the moment line returns, I hear a click and power
is cycled
On 9/22/21 2:05 PM, Andrea Venturoli via Nut-upsuser wrote:
I've got a Smart-UPS 1500 attached via USB and I'm seeing the same
features as you see; so I guess answer is no.
Sorry!
I had read it the other way around, i.e. you were going to switch *to* USB.
bye
On 9/21/21 3:09 PM, Matthieu CERDA via Nut-upsuser wrote:
Hello,
Hello.
Since, apparently, switching from USB to serial management on those
requires restarting the UPS (and possibly a brain dead reset), I wanted
to know if you think switching from USB to serial would yield a more
complete
Hello.
I'm new to the list, but not new to NUT.
I'm trying to make it work on Windows 10 64b as a slave to another
server (which is working).
In the past I had done this on Windows 2012 without troubles, but now I
cannot seem to get it right.
Is NUT expected to work on Windows 10?
I installe
