Arjen de Korte wrote:
> Citeren Thomas Gutzler :
>
>> On a slightly related note.
>> Is it possible to configure two different SHUTDOWNCMDs for two different
>> UPSs?
>
> Could you explain why you think you need this? The SHUTDOWNCMD is used
> to bring down the host 'upsmon' is running on. It mak
Citeren Thomas Jarosch :
On Monday, 16. November 2009 13:57:11 Arnaud Quette wrote:
looking at the compat list, there is no specific entries for CS...
should I create one or is the "Back-UPS USB" entry sufficient?
I think the Back-UPS USB entry is fine. If the question pops up again,
we'll add
2009/11/16 Thomas Jarosch:
> Arnaud,
>
> On Monday, 16. November 2009 13:57:11 Arnaud Quette wrote:
>> looking at the compat list, there is no specific entries for CS...
>> should I create one or is the "Back-UPS USB" entry sufficient?
>
> I think the Back-UPS USB entry is fine. If the question pop
Hi Greg,
> Thanks for the quick reply.
>
> His is the output of r2095
thanks
> =
> Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.1)
> USB communication subdriver 0.18
> 0.00 debug level is '4'
> 0.007087 device 013 opened successfully
> 0.009059 e
Arnaud,
On Monday, 16. November 2009 13:57:11 Arnaud Quette wrote:
> looking at the compat list, there is no specific entries for CS...
> should I create one or is the "Back-UPS USB" entry sufficient?
I think the Back-UPS USB entry is fine. If the question pops up again,
we'll add it to the list
2009/11/16 Thomas Jarosch :
> Hello Francesco,
>
> On Monday, 16. November 2009 12:20:46 mailing - effem wrote:
>> Hello,
>> nut is compatible with APC CS-350 USB e APC CS-500 USB?
>>
>> Anybody use this ups with nut?
>
> Yes, works fine. I use a CS-350 via USB to test a new nut release
> before I
Citeren Nick Warr :
[...]
Attempting to detect the UPS...
Sending "Q1" command...
Wrong answer to "Q1" command.
5 out of 5 detection attempts failed (minimum failures: 2).
Megatec protocol UPS not detected.
I was already afraid that we would get this result. We need a more
recent version of
Hello Francesco,
On Monday, 16. November 2009 12:20:46 mailing - effem wrote:
> Hello,
> nut is compatible with APC CS-350 USB e APC CS-500 USB?
>
> Anybody use this ups with nut?
Yes, works fine. I use a CS-350 via USB to test a new nut release
before I install it on the production servers/UPS.
Hello,
nut is compatible with APC CS-350 USB e APC CS-500 USB?
Anybody use this ups with nut?
Thanks
Francesco
___
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Arjen de Korte ha scritto:
Citeren Nick Warr :
How is the driver failing?
It says there's no Megatec protocol UPS on that port more or less.
Could you run the driver in debug mode and post the (gzip'ed) logs as
an attachment?
/path/to/megatec -DDD -a upsname
The upsname should be th
Citeren Nick Warr :
How is the driver failing?
It says there's no Megatec protocol UPS on that port more or less.
Could you run the driver in debug mode and post the (gzip'ed) logs as
an attachment?
/path/to/megatec -DDD -a upsname
The upsname should be the name as configured in ups.
Citeren Thomas Gutzler :
They're also on the same bus ('Bus 003 Device 063' and 'Bus 003 Device
064')
Since there is no flag for manufacturer,
There is. See 'man 8 usbhid-ups' for all regular expressions that you
can use to identify units.
I did that, but all I could find was vendor, product,
Charles Lepple ha scritto:
On Nov 6, 2009, at 9:08 AM, nick wrote:
I've got a big UPS from an italian manufacturer MSC elettronica which
should be megatec protocol based. They distribute it with
Upsilon2000, developed by Megatec, and with a cable listed on the
megatec site:
Which cable? M25
13 matches
Mail list logo