Hi all,
Longtime listener; first time caller.
I signed up to SamKnows (partly out of curiosity and partly so I can have
hard data about my connection that I pay for) at home.
Over the last week my connection has gone from slightly adequate with the
occasional drop out to a slow connection with r
I’ve had a SamKnows node since inception. They only ever use a % of your
connection, however they only know your connection speed if you have correctly
filled out your profile on their site.
Sent from my iPhone
> On 27/09/2018, at 11:38 AM, Brian Cole wrote:
>
> Hi all,
>
> Longtime liste
Hi Brian,
You should call their support if you think there’s something going on that’s
impacting your connection.
They will detect if your connection is in use and doing more than (I think)
64kbit/s in the last 30s or something, and won’t run the tests.
They have some clever stuff to detect if
Acknowledged with thanks,
Brian
On Thu, 27 Sep 2018 at 12:58 PM, Nathan Ward wrote:
> Hi Brian,
>
> You should call their support if you think there’s something going on
> that’s impacting your connection.
>
> They will detect if your connection is in use and doing more than (I
> think) 64kbit/
There is a Geekzone thread that I kicked off when I attended the Commerce
Commission presentation about Samknows and got to meet Sam.
https://www.geekzone.co.nz/forums.asp?forumid=49&topicid=237852
I've done a bit of analysis on the traffic but haven't dug too deep yet as
I didn't want to bust op
performance of your home router.
good luck - regards brian
Original Message
Subject: Re: [nznog] Comcom/Samknows broadband testing from a different
perspective
From: "Peter Lambrechtsen"
Date: Thu, September 27, 2018 4:37 pm
T
> On 28/09/2018, at 8:49 AM, Jason Orchard wrote:
>
> Note:
> The Samknows device is the only (Connection) plugged into this GPON interface.
> There is other user traffic been generated on this port other than samknows
> device.
Do you mean “no other” ?
Interesting results. Can you get packet
gt;>
>> [image: cid:image002.png@01D45702.A09DE340]
>>
>>
>>
>>
>>
>> *Jason Orchard*
>>
>> Senior Network Engineer | Enable Networks Limited
>>
>> DDI +64 3 741 5283
>>
>> M+64 27 666 8468
>>
>> www.ena
d:image004.jpg@01D3B097.6E668880
>
>
>
> *From:* nznog-boun...@list.waikato.ac.nz
> <mailto:nznog-boun...@list.waikato.ac.nz>
> <mailto:nznog-boun...@list.waikato.ac.nz>> *On Behalf Of
> *brianpars...@subpico.com <mailto:brianpars...@sub
;
>>
>> [image: cid:image002.png@01D45702.A09DE340]
>>
>>
>>
>>
>>
>> *Jason Orchard*
>>
>> Senior Network Engineer | Enable Networks Limited
>>
>> DDI +64 3 741 5283
>>
>> M+64 27 666 8468
>>
>> www.
rchard
Cc: nznog@list.waikato.ac.nz
Subject: Re: [nznog] Comcom/Samknows broadband testing from a different
perspective
Bringing this conversation back on list, Jason is accessing the M-Lab servers
via Spark.
I would expect the performance through Spark to be poorer as they don't peer in
NZ. Inst
11 matches
Mail list logo