Well ya know , I worked on one of these old trucks , _once_ =8-) .
-Nate
David wrote:
>
> Nate thanks for that tip. That is a very cool trick to prime the carb and pump
>
>
>
> Sent from my Palm Pre on the Now Network from Sprint
> On Apr 17, 2011 3:44 PM, Nate vwnate1@... wrote:
>
>
You can always give me a call too , might take a bit to get over there but I
awoke it once and can prolly do it again .
-Nate
Lon wrote:
>
> Thanks Nate! I'll give it a go!
>
>
>
>
>
> From: Nate
> To: old-chevy-truck@yahoogroups.com
> Sent: Sun, Apri
Tony ;
Regardless of your abilities , there is a very specific sequence you *must*
follow or you'll be wasting time and spinning your wheels .
If you'll follow it , I'll walk you through it , you'll need to buy few basic
tools you need anyways as long as you own this fine truck .
-Nate
Yes ;
This is a good idea , fill the cylinders and allow to soak for 24 hours , also
remove the rockerbox and squirt MMO , ATF or other thing , Machine or
Penetrating typ oil on the valve stems between the valve springs , this will
prevent the valves from sticking and bending the push rods (co
Drain & refill the oil with thn oil like 10W anything . Then remove the spark plugs and do a valve adjust because the valves willsurely be tight from running it hot before . Then set the points gap /dwell (33 degrees) and finally , set the ign. timing to ball on pointer , go crank
ruck@yahoogroups.com
Sent: Mon, April 18, 2011 2:35:33 PM
Subject: [old-chevy-truck] Re: Re - Awakening
Well ya know , I worked on one of these old trucks , _once_ =8-) .
-Nate
David wrote:
>
> Nate thanks for that tip. That is a very cool trick to prime the carb and pump
>
>
: [old-chevy-truck] Re: Re - Awakening
You can always give me a call too , might take a bit to get over there but I
awoke it once and can prolly do it again .
-Nate
Lon wrote:
>
> Thanks Nate! I'll give it a go!
>
>
>
>
>
> From
