Paul: I misunderstood your original comment. I thought you had dimensions to
mount the carrier on the bed side.
Nick K.
51 261 3100
74 454 Vette
Oak Island NC
"Paul R. Wisner" <[EMAIL PROTECTED]> wrote:
Nick,
The placement dimensions to locate the pattern on the fender are in the
picture.
Ah! OK Thanks.
Dennis
--- "Paul R. Wisner" <[EMAIL PROTECTED]> wrote:
>
> Dennis,
>
> I'm running 16" but that has nothing to do with the
> carrier pattern - My
> truck does not have the cutout fender on it. I have
> an "extra" cutout
> fender that I took the measurements on.
>
> Sorry for
Nick,
The placement dimensions to locate the pattern on the fender are in the
picture. You'll have to look at all the pictures to get them all. The only
one I have trouble seeing is from the bottom of pattern to the horizontal
fender crease.
Paul
- Original Message -
> Paul: I didn'
Dennis,
I'm running 16" but that has nothing to do with the carrier pattern - My
truck does not have the cutout fender on it. I have an "extra" cutout
fender that I took the measurements on.
Sorry for the confusion.
Paul
- Original Message -
> Paul, are you running 15" or 16" tires?
Paul, are you running 15" or 16" tires?
Dennis
--- "Paul R. Wisner" <[EMAIL PROTECTED]> wrote:
>
> I took the dimensions from the pattern shown in the
> link below and compared
> them to my original fender last night.
>
> It was a little difficult to measure the curve but
> every dimension s
Paul: I didn't see these dimensions in the article. Are you going to take
them? Please let everyone know if you do.
Thanks,
Nick K.
51 261 3100
74 454 Vette
Oak Island NC
"Paul R. Wisner" <[EMAIL PROTECTED]> wrote:
all the dimensions listed for the pattern to the bed
sidewall (
I took the dimensions from the pattern shown in the link below and compared
them to my original fender last night.
It was a little difficult to measure the curve but every dimension seemed to
be dead on. Since the edges are slightly rounded I place it as plus/minus
1/8".
I wasn't able to verify
Great idea. Let me know how it measures up.
Dennis
--- "Paul R. Wisner" <[EMAIL PROTECTED]> wrote:
>
> Dennis,
>
> I will check this template against my original
> fender.
>
> Paul Wisner
>
> - Original Message -
>
>
http://www.stovebolt.com/techtips/sparetire/sparetire.htm
>
>
Dennis,
I will check this template against my original fender.
Paul Wisner
- Original Message -
http://www.stovebolt.com/techtips/sparetire/sparetire.htm
Ole Chevy and GMC trucks rule!
To unsubscribe, send an email (with no subject, no body, just the email), to:
[EMAIL PROTECTE
That's it exactly, Lorne. Thanks much!
Dennis
--- mboutdoors <[EMAIL PROTECTED]> wrote:
>
>
> Dennis, I think this is what you are looking for...
> and it has a
> diagram for making your own stencil with all
> measurements needed.
>
>
http://www.stovebolt.com/techtips/sparetire/sparetire.h
Dennis, I think this is what you are looking for... and it has a
diagram for making your own stencil with all measurements needed.
http://www.stovebolt.com/techtips/sparetire/sparetire.htm
Good Luck,
Lorne
--- In old-chevy-truck@yahoogroups.com, Dennis Miga
<[EMAIL PROTECTED]> wrote:
> Than
11 matches
Mail list logo