30 ноября 2016 г. 17:45:53 CET, "Дмитрий Глушенок" пишет:
>The 'reboot' works, but it kills all processes at once (including
>iscsid), leaving no chances for ZFS to flush write cache. And I suspect
>that with current iscsi/initiator SMF service implementation the same
>happens
The Intel ixgbe driver (and igb/e1000g driver for the 1Gb NICs as well) comes
in two parts: The “Intel Common Code” - a library that’s maintained by Intel
and provides the core functions for configuring and operating an Intel NIC, and
the OS-specific wrapper code that uses it and provides all
Hi,
The SFP+ is a Cisco P/N 10-3105-01 is just not supported because it's
not an Intel part :-)
Richard Skelton wrote:
> Hi,
> After setting the allow_unsupported_sfp = 1;
> I now see :-
>
> Nov 28 20:59:46 myhost pcplusmp: [ID 805372 kern.info] pcplusmp:
> pciex8086,10fb (ixgbe) instance 0 irq
The 'reboot' works, but it kills all processes at once (including iscsid),
leaving no chances for ZFS to flush write cache. And I suspect that with
current iscsi/initiator SMF service implementation the same happens (but for
some reason sync(), which is being called by 'reboot' after killing
> Does anybody uses ZFS over iSCSI?
>
> There is problem with reboots as iscsi-initiator service does not
> taking care of ZFS while shutting down. It leads to zpool goes into
> UNAVAIL state and then first sync() issued gets blocked with following
> stack:
We have a significant ZFS-over-iSCSI
Hi!
Does anybody uses ZFS over iSCSI?
There is problem with reboots as iscsi-initiator service does not taking care
of ZFS while shutting down. It leads to zpool goes into UNAVAIL state and then
first sync() issued gets blocked with following stack:
stack pointer for thread ff03d8d968c0:
This is encouraging!
Thanks.
Fred
> -Original Message-
> From: wo...@4amlunch.net [mailto:wo...@4amlunch.net]
> Sent: 星期三, 十一月 30, 2016 20:04
> To: Fred Liu
> Cc: omnios-discuss@lists.omniti.com; smartos-disc...@lists.smartos.org;
> Discussion list for OpenIndiana;
I'm using ConnectX-2 cards in my OmniOS fileserver. Everything works perfectly.
Including SRP (SCSI RDMA). I use it with ESXi hosts.
-brian
> On Nov 30, 2016, at 06:47, Fred Liu wrote:
>
> Hi,
>
> Please post if you know.
>
>
> Thanks.
>
> Fred
>
Hi,
Please post if you know.
Thanks.
Fred
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss