Re: [Iscsitarget-devel] IET Performance

ensure its performance. The above is applicable to 1G and 10G. I am not sure about the current implementation with zero copy. Thanks Gopala krishnan Varatharajan. On Sun, Nov 8, 2009 at 9:24 PM, Scott Kaelin wrote: > > > On Sun, Nov 8, 2009 at 4:47 AM, Gopu Krishnan wrote: > >>

Re: Infortrend + "iSCSI: detected conn error (1011)" + "TCP Dup ACK"

Hi all, I am working on iSCSI En. Tar. Could you please someone explain about the performance of the IET. If so how the performance was calculated and what was the througput for the same. Thanks Gopala krishnan Varatharajan On Sat, Nov 7, 2009 at 3:09 AM, Matthew Dickinson < matt-openis...@alpha

Re: Poor read performance with IET

Pryker, Test your environment with NULL I/O. Perform the read and write and check the performance which should attains around 100MB/s. If not so the problem would be around IET on your environment, Else the problem may be attained with your disk I/O or back-end driver. Thanks Gopala krishnan Vara

Getting the initiator/target IP address from the IET code

Hi All, Let us take there are multiple initiator and target, Assume the session/connection got established and the IO is going fine. I need to retrieve the initiator and target IP address on which a session got established, where can I hook this from the IET code. Is it possible to retrieve the I

Re: Getting the initiator/target IP address from the IET code

give me more info on this. Regards Gopal. On Wed, Feb 24, 2010 at 12:37 PM, Ulrich Windl < ulrich.wi...@rz.uni-regensburg.de> wrote: > On 23 Feb 2010 at 16:55, Gopu Krishnan wrote: > > > Is it possible to retrieve the IP address from struct sock. > > > > AFAIK,

Chap implementaion

Hi All, I am trying to connect Microsoft initiator and Linux target. Am trying to understand how the bidirectional chap happens. What is the CHAP_N will be send between the Microsoft initiator and target and vice-versa. Is there is any functionality differnce between the both? I also would like t

iSNS implementation

Hi All, Am newbie to the iSNS part of the IET implementation. Am bit confused about the implementation part in isns.c file. We create socket and have one fd in listen mode and during the event loop, based on the poll we do create socket and connect. I am not clear why and when this c

iSNS implementation

> > Hi All, > > Am newbie to the iSNS part of the IET implementation. Am bit confused about >the implementation part in isns.c file. > >We create socket and have one fd in listen mode and during the event > loop, >based on the poll we do create socket and connect. > >I am not clear

iSNS implementation

Hi All, Can someone explain about what is the usage of this "print_scn_pdu()" function defined in isns.c file. Thanks Gopal. -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-is...@googlegroups.com. To uns

target creation and isns scn notification

Hi All, In IET code, we create the target before the isns init. I understand that for per target we do have the isns scn registration. But we do SCN registration only for the targets which are created by ietadm. From that point is what the use_isns got enabled. I would like to conclude, that the

Fwd: target creation and isns scn notification

Hi All, Can someone look into this issue as mentioned in the below mail thread. I feel this is an BUG. If not please clarify on the same. Thanks Gopal. -- Forwarded message -- From: Gopu Krishnan Date: Wed, Mar 17, 2010 at 3:54 PM Subject: target creation and isns scn

Broadcom driver update

Hi, Currently am using 1G Netextreme Gigabit ethernet card. Any one knows how to update the flash. Is there is any possible to update the iSCSI TOE into the 1G BCM board. Thanks Gopala krishnan varatharajan. -- You received this message because you are subscribed to the Google Groups "open-isc