Akos Vandra writes:
>
>
> Hi!
>
> Thanks for the configuration file.
> Turned out the auto-detected irlen was incorrect, and that was what was
causing the problems.
>
> Regards,
> Ákos Vandra
Hi Ákos,
did you do it? I am working with the s3board[0] (by digilent inc) and I
using openocd
This is an automated email from Gerrit.
Spencer Oliver (s...@spen-soft.co.uk) just uploaded a new patch set to Gerrit,
which you can find at http://openocd.zylin.com/1613
-- gerrit
commit 5d27016255b30de4d83ddc4c7ba350fefd4f42f4
Author: Spencer Oliver
Date: Thu Sep 5 16:36:00 2013 +0100
Thanks, I will try LPC1700 driver.
I have STM32F4 discovery board with built in stlink v2, but it would be
nice to see SWD in FT2232 programmers :) (I have jtag lock pick which
should be able to support SWD according to it's website)
Daniel
On Thu, 05 Sep 2013 13:13:29 +0200
Jörg Fischer wrote
Hi,
Am 03.09.2013 02:09, schrieb Daniel Kowalski:
> Does OpenOCD supports flashing LPC111x chips from NXP?
> I've read users manual and did not find apropriate driver.
They are compatible to the 1700 driver up to 64 KB Flash (4k Pages)
IIRC. So it is possible to flash them.
> I will need to flas
Spen,
Thanks for all your help with this. I've reviewed your patches on gerrit
and am just about to start using my eclipse/gdb/openocd/cmsis-dap setup
in anger so will report back how I get on.
All seems usable at this point - flashing, BPs, stepping over/in/out,
variables, registers (not tried