that with zfs root, setting size= on the tmpfs line of
/etc/vfstab does not work, I would say a bug needs to be logged about it.
Regards,
Brian
On 02/ 1/10 06:15 AM, Prakash Kochummen wrote:
Hi,
While using ufs root, we had an option for limiting the /tmp size using
mount -o size manual
Hi,
While using ufs root, we had an option for limiting the /tmp size using mount
-o size manual option or setting size=1024m in the vfstab.
Do we have any comparable option available when we use zfs root. If we execute
zfs set size=1024m rpool/swap
it resizes the whole of the swap area which
Thanks for the reply.
Sorry i confused you too. when I mentioned ufs , i just meant ufs root scenario
(pre u6).
Suppose I have a 136G Hdd which as my boot disk,which has been sliced it like
s0-80gb (root slice)
s1-55Gb (swap slice)
s7- (SVM metadb)
My understanding was that if I had 16Gb of
Hi,
I am trying to do an iso using lofiadm within a zone.
# lofiadm
Block Device File
/dev/lofi/1 /zoneroot/nfs/cd.iso
# mount -F hsfs -o ro /dev/lofi/1 /mnt
mount: I/O error
mount: cannot mount /dev/lofi/1
# mount -F hsfs /dev/lofi/1 /mnt
mount: I/O error
mount:
Thanks Mike, I was able to get the jumpstart done by removing the aggregate and
the trunking (thanks to meem) ... i was just thinking that maybe the setup was
not working because of the
When the nxge interface sends out its rarp request to get its IP during the
start of jumpstart, it is an
Hi
Planning the following setup
nxge1+nxge2+nxge3+nxge4 = aggr1
aggr10001 = vlan10
aggr20001 = vlan20
aggr30001 = vlan30
aggr40001 = vlan40
aggr10001:1 - interface for 1st zone in vlan10
aggr10001:2 - interface for 2nd zone in vlan10 etc
On switch side LACP + trunking is configured, the
