Correction:
The subject of this thread is OBE as development has, for a number of weeks,
been conducted on an HP 9000 PA_RISC2.0 platform running HP-UX 11iv1 (B.11.11),
using gcc 4.2.1.
It appears that I'm close to building a FIPS-capable openssl-0.9.7m on HP-UX
11iv1 (B.11.11) using
1. HP pre-built openssl-fips-1.1.2
2. HP openssl-0.9.7m source
from OpenSSL_A.00.09.07m.020_HP-UX_B.11.11_32_64.depot. However, I do not yet
know how to interpret the following
Welling, Conrad Gerhart wrote:
Steve: 1. HP C trial version Appears that there are patchs which must
be applied to the (trial) HP C depot installation on my platform.
I'm not a sysadmin, but, am assuming the role with this particular
PA-RISC2.0 platform. I had assumed that the depot included
Welling, Conrad Gerhart wrote:
Steve:
Here 'tis:
---
Makefile
---
FIPSPROD = openssl-fips-1.1.2.tar
FIPSDIR = openssl-fips-1.1.2
all:
-users@openssl.org
Subject: Re: openssl-fips-1.1.2 make install fails in
fips-1.0/Makefile for hpux64-ia64-cc HP-UX 11
Welling, Conrad Gerhart wrote:
Steve:
Here 'tis:
---
Makefile
Stop.
*** Error exit code 1
Stop.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Steve
Marquess
Sent: Tuesday, April 15, 2008 1:33 PM
To: openssl-users@openssl.org
Subject: Re: openssl-fips-1.1.2 make install fails in
fips-1.0/Makefile for hpux64-ia64-cc HP-UX
Welling, Conrad Gerhart wrote:
Steve:
Well, I put the IA64 build on the back burner. I downloaded the trial HP C
compiler package and installed it on a HP-UX 11 PA-RISC2.0 platform on which
I have tried to build openssl-fips-1.1.2. I've hit a snag (actually, a few)
and spent a few days
@openssl.org
Subject: Re: openssl-fips-1.1.2 make install fails in
fips-1.0/Makefile for hpux64-ia64-cc HP-UX 11
Welling, Conrad Gerhart wrote:
Steve:
Well, I put the IA64 build on the back burner. I downloaded the trial HP C
compiler package and installed it on a HP-UX 11 PA-RISC2.0 platform
Steve:
Here 'tis:
---
Makefile
---
FIPSPROD = openssl-fips-1.1.2.tar
FIPSDIR = openssl-fips-1.1.2
all:fips-build
$(FIPSDIR): $(FIPSPROD)
Welling, Conrad Gerhart wrote:
#12#3#4#5#6#7#8
Problem description: openssl-fips-1.1.2 make install fails in
fips-1.0/Makefile for hpux64-ia64-cc, HP-UX 11.
#12#3#4#5#6#7
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Steve
Marquess
Sent: Tuesday, April 15, 2008 6:10 AM
To: openssl-users@openssl.org
Subject: Re: openssl-fips-1.1.2 make install fails in
fips-1.0/Makefile for hpux64-ia64-cc HP-UX 11
Welling, Conrad Gerhart wrote
Welling, Conrad Gerhart wrote:
Well, Steve, if you had no problem, I'm inclined to believe that I am in
error and that I didn't review the occurrence properly before reporting it.
I'll report back when I've reviewed the issue again by confirming it's
occurrence (start-from-scratch) and I'll
#12#3#4#5#6#7#8
Problem description:
openssl-fips-1.1.2 make install fails in fips-1.0/Makefile for
hpux64-ia64-cc, HP-UX 11.
#12#3#4#5#6#7#8
#12
13 matches
Mail list logo
