Carlos E. R. wrote:
The Friday 2007-09-21 at 09:11 +0800, James Li wrote:
$ zypper --help | grep source-install
source-install, si Install a source package
Thanks! Can I only download the src rpm without installation?
Currently not (maybe in openSUSE 11 :O). But the source
* James PEARSON [EMAIL PROTECTED] [Sep 20. 2007 21:05]:
During the installation my thinkpad model was incorrectly recognized as an
R40 2681
The thinkpad model is ThinkPad T40 2373
This is the first time that I have seem yast install mistake the model.
Such data is retrieved from the BIOS.
The problem is the newer version of gstreamer in the packman repository.
You can resolve it in YaST (also during installation) by manually
selecting the version of gstreamer from factory in the Versions tab.
You will probably not be able to resolve this with zypper, maybe by
disabling the packman
Felix Miata [EMAIL PROTECTED] writes:
A SATA system with 15 partitions was never ever supported!
I well understand that. However
https://bugzilla.novell.com/show_bug.cgi?id=218122 summary says Support more
than 15 partitions on libata, not Support more than 15 partitions on PATA
on libata.
M9. wrote:
Jan Kupec schreef:
The problem is the newer version of gstreamer in the packman repository.
You can resolve it in YaST (also during installation) by manually
selecting the version of gstreamer from factory in the Versions tab.
You will probably not be able to resolve this with
On Fri, 21 Sep 2007, jdd wrote:
Hello,
I have a mobo K7VT6 with Asrock network, configured through dhcp and via-rhine
module.
works perfectly in 10.1
I install 10.3 RC1 by upgrade of older alpha (3 I think)
when I need to configure the net, Yast detects the card and see it
Hello,
I have a mobo K7VT6 with Asrock network, configured through dhcp and
via-rhine module.
works perfectly in 10.1
I install 10.3 RC1 by upgrade of older alpha (3 I think)
when I need to configure the net, Yast detects the card and see it
unconfigured
I hit configure, dhcp, ok... and
Hello,
Marcus Rueckert wrote:
On 2007-09-20 09:17:53 -0600, Aaron Bockover wrote:
The Fluendo codecs only target GStreamer. You should have support in
Banshee, Totem, and possibly Amarok, if you are using the GStreamer
engine.
even on ppc?
Yes, and with Amarok it works fine.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Friday 2007-09-21 at 10:02 +0200, Andreas Jaeger wrote:
...
More than 15 are supported with LVM since ages. The problem we're
talking about is migration - and therefore the bug is called on libata.
Seeing your confusion, I guess it should
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Friday 2007-09-21 at 08:43 +0200, Jan Kupec wrote:
Thanks! Can I only download the src rpm without installation?
Currently not (maybe in openSUSE 11 :O). But the source 'installation'
is not a big deal... just copies the tarball into
Hi everyone!
So far, RC1 looks pretty good. There are just a few things that caught
my attention:
- What happened to the media check? When I installed from DVD I was not
asked if I wanted to check the installation media. Is this a bug or a
feature? I know it was there before...
- Online
On 9/21/07, nordi [EMAIL PROTECTED] wrote:
- What happened to the media check? When I installed from DVD I was not
asked if I wanted to check the installation media. Is this a bug or a
feature? I know it was there before...
Known bug, see https://bugzilla.novell.com/show_bug.cgi?id=326861
nordi [EMAIL PROTECTED] writes:
- What happened to the German release notes? I have release notes in
lots of languages, but the German version is not in the rpm.
Tha German team is short on translators; I've the gut feeling the German
team lost the team coordinator. If you want to know about
Hi,
yesterday I've installed openSUSE 10.3 RC1 and after the installation
the boot process from hard disk hangs, when udevd is being started.
After waiting minutes, nothing happens, even after pressing STRG+C. With
openSUSE 10.3 Beta 3 I had the same problem. But the system is not
frozen, because
nordi [EMAIL PROTECTED] writes:
Hi everyone!
So far, RC1 looks pretty good. There are just a few things that caught
my attention:
- What happened to the media check? When I installed from DVD I was
not asked if I wanted to check the installation media. Is this a bug
or a feature? I know
Hi.
Just installed the 10.3 RC1
b4 I used 10.3 Beta3
With that I had my old DLINK DWL-610 wlan pcmcia to work with aid of
ndiswrapper:
And the dmesg showed this:
Output of dmesg:
ndiswrapper version 1.47 loaded (smp=yes)
ndiswrapper: driver net8180 (Realtek,10/07/2004,5.173.1007.2004) loaded
On Fri, 2007-09-21 at 18:39 +0200, Richard Bos wrote:
Op Thursday 20 September 2007 18:12:35 schreef James Li:
smart/rug/yast2/apt/yum or other tools?
apt source package or
apt source_pkg package
These tools are all fine and dandy as long as you already know the name
of the package you
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jan Kupec schreef:
M9. wrote:
Jan Kupec schreef:
The problem is the newer version of gstreamer in the packman repository.
You can resolve it in YaST (also during installation) by manually
selecting the version of gstreamer from factory in the
Op Thursday 20 September 2007 18:12:35 schreef James Li:
smart/rug/yast2/apt/yum or other tools?
apt source package or
apt source_pkg package
--
Richard Bos
We are borrowing the world of our children,
It is not inherited from our parents.
On 2007/09/21 10:02 (GMT+0200) Andreas Jaeger apparently typed:
I guess you should
start this discussion on the ... libata
development list.
I don't see any such list on http://vger.kernel.org/vger-lists and Google
doesn't seem to be able to find one for me elsewhere. Do you have
subscription
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
M9. schreef:
Jan Kupec schreef:
M9. wrote:
Jan Kupec schreef:
Hmm.. puzzling :O) Without using the packman repo, it should work with
zypper.
I will try that than.. ;-)
j.
wtf is going on now?
[EMAIL PROTECTED]:~ su
Wachtwoord:
When trying out alphas and betas, I've finally gotten used to just
burning the first 40Mb of the DVD (or the first CD-iso). Wasting a CD
per version isn't really a big deal, but is there any way of e.g.
creating one multi-session CD with Aplha1 and then appending the
subsequent (mini-)versions
According to https://bugzilla.novell.com/show_bug.cgi?id=224462 , EVMS
installation was disabled in 10.2 and was to be reenabled in 10.3.
I'd like to try it in RC1, but it is apparently still not enabled. Is there
any way I can enable it myself?
--
James Oakley
[EMAIL PROTECTED]
Hi,
LDAP login fails for me on 10.3, RC1.
from /var/log/messages i get this:
Sep 21 23:02:46 norbert nscd: nss_ldap: failed to bind to LDAP server
ldap://10.0.0.3: Can't contact LDAP server
But that does noe help me that much. I tried to install Wireshark, but
can not find it in yast or the
Hi,
has somebody found a way around bug 304318? I really need the option to
mount nfs shares as an ordinary user.
Thanks!
FMF
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
I couldn't update an opensuse 10.2 with 10.3 RC1 because an unresolvable
dependency resolution timeout
What is this???
Is there a way to force updating anyway?
IMO, if there's a package conflict, yast can't resolve it, ok, just
leave it, who cares, it will not work anyway. Or the package
Rajko M. wrote:
On Tuesday 18 September 2007 06:48, Jim Flanagan wrote:
...
Just curious, does anyone know what FS Google themselves use? Do they
use one or more of these file systems, or did they take the effort to
write their own? Would be interesting to know.
JF
James P. Bland wrote:
Check the processors in the URL below.
http://www.intel.com/technology/platform-technology/virtualization/products
.htm?iid=technology_virtualizationoverview+tabs_products
Try these links:
http://wiki.xensource.com/xenwiki/HVM_Compatible_Processors
Hi.
I have updated my openSUSE 10.2.
After I have problem with my Nvidia setup. A module cannot be loaded.
Below is the /var/log/Sax2.log. How can I solve the problem ?
/*
SaX2 log : SaX2 version 8.1 - SVN Release: 1.49 2003/03/17
**
SVN RELEASE : 1271
On 9/21/07, Fernando Costa [EMAIL PROTECTED] wrote:
I must run emerald --replace
from the command line to use emerald as my window decorator but this
setting is missed the next time I restart the computer, is there some
way to do this automatically?
On Thu, 2007-09-20 at 20:21 -0400, James Knott wrote:
Michael Skiba wrote:
Am Donnerstag, 20. September 2007 13:11:57 schrieb James Knott:
Basil Chupin wrote:
James Knott wrote:
Are there any plans for a SUSE version of OpenOffice.2.3?
tnx jk
Smart
Ben Kevan [EMAIL PROTECTED] writes:
On Thursday 20 September 2007 12:34:16 pm Benji Weber wrote:
On 20/09/2007, Ben Kevan [EMAIL PROTECTED] wrote:
I would totally understand if the reasoning was because it is not
considered fully tested / stable with Novell modifications, that would
make
Erik Jakobsen wrote:
Hi.
I have updated my openSUSE 10.2.
After I have problem with my Nvidia setup. A module cannot be loaded.
Below is the /var/log/Sax2.log. How can I solve the problem ?
Hi again.
I have done this per the info given in the #suse IRC:
lajka3:~ # zypper install
Erik Jakobsen wrote:
Erik Jakobsen wrote:
Hi.
I have updated my openSUSE 10.2.
After I have problem with my Nvidia setup. A module cannot be loaded.
Below is the /var/log/Sax2.log. How can I solve the problem ?
Hi again.
I have done this per the info given in the #suse IRC:
lajka3:~ #
I just want to verify the following for openSUSE 10.0:
1) There is no on-line non-oss repository any more.
2) There is no GNOME STABLE repository.
The links on http://en.opensuse.org/Additional_YaST_Package_Repositories
do not work (for quite a time). There are probably others. I just happen
to
Solved by installing this driver:
NVIDIA-Linux-x86-100.14.11-pkg1.run
/Erik
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
openSUSE10.2, KDE
How do I get videos to open in the current mplayer (gmplayer or
smplayer) window - at the moment it opens a new instance for every file
I click on.
Hans
E-Mail disclaimer:
http://www.sunspace.co.za/emaildisclaimer.htm
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For
Am Freitag, 21. September 2007 03:13:35 schrieb Aaron Kulkis:
Just how stupid are you?
May I return this question?
You're the fifth answer to that question. Is this really neccessary?
(especially in such a rude language?)
Of course I ask myself a similar question(how can someone not get
Hi,
On Friday, September 21, 2007 at 14:29:43, Michael Skiba wrote:
Am Freitag, 21. September 2007 03:13:35 schrieb Aaron Kulkis:
Just how stupid are you?
May I return this question?
No you may not ;)
Aaron is no longer on this list. Im sorry but it seems that this is the
only
On Fri, 2007-09-21 at 14:34 +0200, Michael Skiba wrote:
Am Freitag, 21. September 2007 10:40:32 schrieb Roger Oberholtzer:
I just want to verify the following for openSUSE 10.0:
Please re-read: I am looking for 10.0. Not 10.2
1) There is no on-line non-oss repository any more.
Negative,
Am Freitag, 21. September 2007 02:21:10 schrieb James Knott:
However I just wanted to say, that openoffice.org also offers downloads
of the latest OOo versions ;) (also rpms)
I haven't noticed a 64 bit version there.
The 64 bit versioen aren't released till now because we haven't tester with
* Michael Skiba [EMAIL PROTECTED] [09-21-07 08:38]:
Am Freitag, 21. September 2007 10:40:32 schrieb Roger Oberholtzer:
I just want to verify the following for openSUSE 10.0:
1) There is no on-line non-oss repository any more.
Michael Skiba [EMAIL PROTECTED] writes:
Am Freitag, 21. September 2007 10:40:32 schrieb Roger Oberholtzer:
I just want to verify the following for openSUSE 10.0:
1) There is no on-line non-oss repository any more.
Negative, I've one: i.e.
Jim Flanagan wrote:
Rajko M. wrote:
On Tuesday 18 September 2007 06:48, Jim Flanagan wrote:
...
Just curious, does anyone know what FS Google themselves use? Do they
use one or more of these file systems, or did they take the effort to
write their own? Would be interesting to know.
JF
Am Freitag, 21. September 2007 10:40:32 schrieb Roger Oberholtzer:
I just want to verify the following for openSUSE 10.0:
1) There is no on-line non-oss repository any more.
Negative, I've one: i.e.
http://download.opensuse.org/distribution/10.2/repo/non-oss
2) There is no GNOME STABLE
Am Freitag, 21. September 2007 14:36:53 schrieb Michael Skiba:
Am Freitag, 21. September 2007 02:21:10 schrieb James Knott:
However I just wanted to say, that openoffice.org also offers downloads
of the latest OOo versions ;) (also rpms)
I haven't noticed a 64 bit version there.
[...]
Am Freitag, 21. September 2007 14:55:00 schrieb Roger Oberholtzer:
Please re-read: I am looking for 10.0. Not 10.2
Ouch.. sorry..
The links on
http://en.opensuse.org/Additional_YaST_Package_Repositories do not work
(for quite a time).
At least this link works for 10.0 and 10.2 :D
Am Freitag, 21. September 2007 14:39 schrieb Henne Vogelsang:
Hi,
On Friday, September 21, 2007 at 14:29:43, Michael Skiba wrote:
Am Freitag, 21. September 2007 03:13:35 schrieb Aaron Kulkis:
Just how stupid are you?
May I return this question?
No you may not ;)
Aaron is no
* Rolf Masfelder [EMAIL PROTECTED] [09-21-07 09:34]:
You 'unsubscribed' Aaron? Did I miss something?
A lot, apparently. Must be new :^)
The initial question was from clifford jackson ...
but Aaron *has* a history.
--
Patrick Shanahan Plainfield, Indiana, USAHOG #
Hello all,
I'm trying to install lighttpd server from yast. The installation seems to
be ok but when I try to start the server with '/etc/init.d/lighttpd start' I
get the following error:
linux-fb4w:/home/wetter # /etc/init.d/lighttpd start
Starting lighttpd startproc: Empty pid file
On 09/21/2007 08:36 PM, Michael Skiba wrote:
Am Freitag, 21. September 2007 02:21:10 schrieb James Knott:
I haven't noticed a 64 bit version there.
The 64 bit versioen aren't released till now because we haven't tester with
these maschines (IRC)
I guess this is a invitation for
Henne Vogelsang wrote:
Hi,
On Friday, September 21, 2007 at 14:29:43, Michael Skiba wrote:
Am Freitag, 21. September 2007 03:13:35 schrieb Aaron Kulkis:
Just how stupid are you?
May I return this question?
No you may not ;)
Aaron is no longer on this list. Im sorry but it seems
On Friday 21 September 2007 14:39, Henne Vogelsang wrote:
Aaron is no longer on this list. Im sorry but it seems that this is
the only solution possible. Sad but true.
Don't be sorry. He had nothing constructive to say for the most part,
and perhaps now I can remove him from my hit list.
salva benimeli wrote:
Hello all,
I'm trying to install lighttpd server from yast. The installation seems to
be ok but when I try to start the server with '/etc/init.d/lighttpd
start' I
get the following error:
linux-fb4w:/home/wetter # /etc/init.d/lighttpd start
Starting lighttpd
On Fri, 2007-09-21 at 15:28 +0200, Rolf Masfelder wrote:
Am Freitag, 21. September 2007 14:39 schrieb Henne Vogelsang:
Hi,
On Friday, September 21, 2007 at 14:29:43, Michael Skiba wrote:
Am Freitag, 21. September 2007 03:13:35 schrieb Aaron Kulkis:
Just how stupid are you?
Op vr september 21 2007 14:39, schreef Henne Vogelsang:
Hi,
On Friday, September 21, 2007 at 14:29:43, Michael Skiba wrote:
Am Freitag, 21. September 2007 03:13:35 schrieb Aaron Kulkis:
Just how stupid are you?
May I return this question?
No you may not ;)
Aaron is no longer on
Am Freitag, 21. September 2007 01:25:44 schrieb Rajko M.:
On Thursday 20 September 2007 02:31:43 am Albert Straßenberger wrote:
Hi,
I updated kdebase to 3.5.7-89.1.i586.rpm from software.opensuse.org and
get now the same error described in the bug. (kde bugtracking)
:~$ kdesu
Rajko M. wrote:
Overheating?
Core voltage to low?
I have one motherboard where BIOS is setting core voltage to low and
CPU can't run at max bus speed.
Not seams that. See the parameters I got after two hours running:
CPU Temp. : 56ºC
System Temp.: 36ºC
Current CPU FAN Speed: ~
On Friday 21 September 2007 19:02, Toni wrote:
Not seams that. See the parameters I got after two hours running:
CPU Temp. : 56ºC
System Temp.: 36ºC
Current CPU FAN Speed: ~ 1400 rpm
Current EXT FAN Speed: ~ 4618 rpm
V core 1.63V
2,5V2.47V
I was wondering how the upgrade process from RC1 to Final was going to be?
Could I just change Repo's and update the packages that have changed there?
Or will I have to redownload the ISO and do an upgrade?
Thanks
--
How much can you know about yourself, you've never been in a fight? I
On Thu, 2007-09-20 at 11:42 -0700, Ben Kevan wrote:
On Thursday 20 September 2007 05:23:18 am JP Rosevear wrote:
On Thu, 2007-09-20 at 13:57 +0200, Hans van der Merwe wrote:
On Thu, 2007-09-20 at 12:38 +0200, Carlos E. R. wrote:
2.3 is the stable release now, Petr just hasn't had a
Jeremy Figgins wrote:
I've seen a lot of top output thrown around on this topic and a bunch
of people have touched on this issue, but let me ask this question:
I'm sitting right now in front of my 1gig machine. I have my normal set
of apps open: firefox, thunderbird, konsole, etc. How can I
On Fri, 2007-09-21 at 13:12 -0500, Jeremy Figgins wrote:
I've seen a lot of top output thrown around on this topic and a bunch
of people have touched on this issue, but let me ask this question:
I'm sitting right now in front of my 1gig machine. I have my normal set
of apps open: firefox,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Friday 2007-09-21 at 13:12 -0500, Jeremy Figgins wrote:
I've seen a lot of top output thrown around on this topic and a bunch
of people have touched on this issue, but let me ask this question:
I'm sitting right now in front of my 1gig
I've seen a lot of top output thrown around on this topic and a bunch
of people have touched on this issue, but let me ask this question:
I'm sitting right now in front of my 1gig machine. I have my normal set
of apps open: firefox, thunderbird, konsole, etc. How can I tell if I
would benefit
Jeremy Figgins wrote:
I've seen a lot of top output thrown around on this topic and a bunch
of people have touched on this issue, but let me ask this question:
I'm sitting right now in front of my 1gig machine. I have my normal set
of apps open: firefox, thunderbird, konsole, etc. How can I
Sloan wrote:
Jeremy Figgins wrote:
I've seen a lot of top output thrown around on this topic and a bunch
of people have touched on this issue, but let me ask this question:
I'm sitting right now in front of my 1gig machine. I have my normal set
of apps open: firefox, thunderbird, konsole,
Jeremy Figgins wrote:
I've seen a lot of top output thrown around on this topic and a bunch
of people have touched on this issue, but let me ask this question:
I'm sitting right now in front of my 1gig machine. I have my normal set
of apps open: firefox, thunderbird, konsole, etc. How can I
I have a 16GB usb drive. In reading some posts here and on the intraweb, I
decided it would be good to encrypt this drive.
I tried to create a 5G FAT partiion and then an encrypted EXT3 partition. This
worked, but i couldn't figure how to see the ext3 partition.
I then tried to load and create
On Friday 21 September 2007 12:12, Jeremy Figgins wrote:
I've seen a lot of top output thrown around on this topic and a bunch
of people have touched on this issue, but let me ask this question:
I'm sitting right now in front of my 1gig machine. I have my normal set
of apps open: firefox,
2007/9/21, Kai Ponte [EMAIL PROTECTED]:
I have a 16GB usb drive. In reading some posts here and on the intraweb, I
decided it would be good to encrypt this drive.
I tried to create a 5G FAT partiion and then an encrypted EXT3 partition. This
worked, but i couldn't figure how to see the ext3
JJB wrote:
How does this look to you:
Mem: 1027540k total, 977492k used,50048k free, 199076k buffers
Swap: 5245180k total, 131724k used, 5113456k free, 104808k cached
Its a Samba server with 1gb ram, also running Apache and Subversion,
MediaWiki, 60 - 70 users (mostly
Hi all!
I enabled remote administration in YaST;
YaST - Network Services - Remote Adinistration
It works as expectad, but the opened window is set to 1024x768.
I have a dual monitor setup that does 1600x1024x2 and i would like the remote
session to be at least 1280x1024, or better yet, full
Ubuntu has a file at /etc/rc.local
I quote from the script:
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will exit 0 on success or any other
# value on error.
In Ubuntu you can do:
sudo /etc/init.d/rc.local start
sort of stuff with it.
What's
Dear my friends...
I found that my perl cgi script only run if they're placed into
/srv/www/cgi-bin.
Could I have some other locations for keeping and running my perl cgi script by
my apache2?
ScriptAlias /cginya/ /srv/www/htdocs/klien/beol/cgi-bin
Directory /srv/www/htdocs/klien/beol/cgi-bin
On 9/21/07, primm [EMAIL PROTECTED] wrote:
Ubuntu has a file at /etc/rc.local
I quote from the script:
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will exit 0 on success or any other
# value on error.
In Ubuntu you can do:
sudo
primm wrote:
Ubuntu has a file at /etc/rc.local
I quote from the script:
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will exit 0 on success or any other
# value on error.
In Ubuntu you can do:
sudo /etc/init.d/rc.local start
sort of
Well, i had to re-install SLED due to trying to update to gnome 2.18,
this is another story. Now i am wanting to move to SP1 and i am using
YOU. When doing this, i get:
Cannot install
gstreamer010-plugins-base-0.10.14-0.pm.1.i586[20070921-153900]
Can't install
gstreamer010-plugins-base-0.10.14
On Friday 21 September 2007 12:16, Gabriel . wrote:
I tried again to simply create one FAT partition that is encrypted but
this doesn't seem to show up when I plug in the drive.
What do I need to do?
Maybe this could help
Boot.local runs fairly early in the sequence. After.local runs at the end.
which you will have to create, since its not there by default
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Druid wrote:
On 9/21/07, primm [EMAIL PROTECTED] wrote:
Ubuntu has a file at /etc/rc.local
I quote from the script:
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will exit 0 on success or any other
# value on error.
In Ubuntu you can do:
Hi all,
Where would i best place a call like:
# mount -t cifs -o username=reg,password=xyz,uid=100,gid=1000
best? i've tried to make a script mymount and put it in /etc/init.d and made
links in rc5.d and rc3.d as S99mymount and K99mymount but the share still
doesn't get mounted. /etc/fstab
Dear Dave...
Thank you very much for your help.
Yes, if I put the perl cgi script into the /srv/www/cgi-bin, the perl run
properly.
Mmmm.. I wonder if it's possible to put the perl cgi script on another
location? Just I am curious.
Thank you very much for your help.
On Fri, 21 Sep 2007
[20070921-153900]
Can't install
gstreamer010-plugins-base-0.10.14-0.pm.1.i586[20070921-153900], since
gstreamer010-plugins-base-0.10.13-2.12.i586[20070921-145918] is already
marked as needing to be installed
Conflict Resolution:
( ) do not install
gstreamer010-plugins-base
Fri, 21 Sep 2007, by [EMAIL PROTECTED]:
Jeremy Figgins wrote:
I've seen a lot of top output thrown around on this topic and a bunch
of people have touched on this issue, but let me ask this question:
I'm sitting right now in front of my 1gig machine. I have my normal set
of apps open:
Marcus Meissner wrote:
There seems to be another non-Novell repository added.
Disable it for now.
(it likely is packman)
You were correct. Thank you!
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
You know how that other new OS has a full-pop-up of the minimized
window; can SLED with gnome and xgl-compiz do this? Just so i try to
make myself a little clearer; when you have a minimized window and hover
your mouse over any minimized window, a window pops-up of the entire
window (not a text
I am using SLED SP1 with gnome. I don't want that floppy icon on my
desktop. I have tried to move it to the trash and that errored out
saying cant move to trash. I also tried to move it inside my home
folder but this did not work either. How do i get rid of that icon but i
still want the floppy to
On Friday 21 September 2007 16:25, Theo v. Werkhoven wrote:
Fri, 21 Sep 2007, by [EMAIL PROTECTED]:
...
If you're using any swap at all, you would benefit from additional
RAM.
top or free could tell you about swap usage.
Not important at all.
What you should be looking at is the
On 09/22/2007 05:12 AM, Ron Eggler wrote:
Hi all,
Where would i best place a call like:
# mount -t cifs -o username=reg,password=xyz,uid=100,gid=1000
best? i've tried to make a script mymount and put it in /etc/init.d and made
links in rc5.d and rc3.d as S99mymount and K99mymount but the
Rajko M. wrote:
On Thursday 20 September 2007 02:31:43 am Albert Straßenberger wrote:
Hi,
I updated kdebase to 3.5.7-89.1.i586.rpm from software.opensuse.org and get
now the same error described in the bug. (kde bugtracking)
:~$ kdesu -c smart --gui
kdesu: Unbekannte Option --gui.
I have FiOS and you'll be fine. No special software needed. Verizon
didn't remove my copper, but they do cut it to tie the phone system
into the fiber. My biggest complaint is the router. They used an
ActionTec. Has some very granular controls when compared to say a
Linksys, etc., but you'd
On Friday 21 September 2007 12:02:10 pm Toni wrote:
Rajko M. wrote:
Overheating?
Core voltage to low?
I have one motherboard where BIOS is setting core voltage to low and
CPU can't run at max bus speed.
Not seams that. See the parameters I got after two hours running:
CPU Temp. :
On Friday 21 September 2007 20:58, Basil Chupin wrote:
Rajko M. wrote:
On Thursday 20 September 2007 02:31:43 am Albert Straßenberger wrote:
Hi,
I updated kdebase to 3.5.7-89.1.i586.rpm from software.opensuse.org and
get now the same error described in the bug. (kde bugtracking)
Hi, everyone,
I just installed osc on openSUSE 10.3; the first run asked me for my
username/password, so I gave it what I use for the openSUSE wiki and
bugzilla.novell.com.
However, it doesn't want to authenticate :( I turned on http_debug in
the config file. Attached is what osc prints.
Does
On 20.09.2007, at 14:14, Francis Giannaros wrote:
On 9/20/07, Christoph Thiel [EMAIL PROTECTED] wrote:
On Thu, Sep 20, 2007 at 01:02:51PM +0100, Francis Giannaros wrote:
On 9/20/07, Francis Giannaros [EMAIL PROTECTED] wrote:
Hi,
For several releases now people haven't been able to find the
96 matches
Mail list logo
