After install alpha 0 on vmware the x server fail to start.
I'm not very good to find this kind of error, I'm attaching the logs,
but I'm not sure what the error is
I uploaded the xorg and messages log here http://www.mediafire.com/?9d9m9wkuwph
May you could gave me a tip or something to know
On Dec 13, 2007 12:57 PM, Ken Schneider [EMAIL PROTECTED] wrote:
Bryen pecked at the keyboard and wrote:
Looks like you are not the only one. Someone else I know also failed to
get sax2/xwindows to start on VMWare.
I had two of the problems mentioned on the MAB (Most Annoying Bugs) site
On Dec 5, 2007 5:31 AM, Dominique Leuenberger
[EMAIL PROTECTED] wrote:
Hello,
in fact, zypper works quiet well, and libzypp is of course needed.
Unfortunately, when doing so, you have to upgrade almost all of the Yast2
stack (packeger is missing dependencies, new version requires new yast
El mié, 05-12-2007 a las 18:03 -0500, Patrick Shanahan escribió:
You should use the force, Luke:
rpm -q --whatrequires subject-package
a little investigation would be called for before calling the BugZilla.
You are suggesting a manual verification, this is not the real solution.
Yast
Is it possible to have zypper and yast from 10.3 working on 10.2? Does
it have any special requirement?
--
Kind Regards
Visitá/Go to http://www.opensuse.org
On Nov 20, 2007 6:21 AM, Stanislav Visnovsky [EMAIL PROTECTED] wrote:
Dňa Friday 16 November 2007 23:27:50 Gabriel . ste napísal:
The online updater tool (not opensuse-updater) says that I have to
update a lot of packages that I'm 100% sure, they are not installed.
Is this a know issue
The online updater tool (not opensuse-updater) says that I have to
update a lot of packages that I'm 100% sure, they are not installed.
Is this a know issue?
--
Kind Regards
Visitá/Go to http://www.opensuse.org
On Nov 15, 2007 10:59 PM, Cristian Rodríguez [EMAIL PROTECTED] wrote:
Gabriel . escribió:
Shall I open a bug report?
known redirector issue, just use a different, static mirror for the
update repository.
Thanks.
--
Kind Regards
Visitá/Go to http://www.opensuse.org
N�r��y隊Z)z{.���r
Trying to add the update repository for 10.3 show this message:
File ./repodata/patch-fetchmsttfonts.sh-4347.xml not found on media:
http://download.opensuse.org/update/10.3/
Shall I open a bug report?
--
Kind Regards
Visitá/Go to http://www.opensuse.org
Carlos F Lange escribió:
On Fri November 2 2007 13:36, Gabriel . wrote:
As the subject says, does it?
No, it doesn't:
http://lists.opensuse.org/opensuse-factory/2007-11/msg00014.html
(I mixed up CD and DVD ...)
But Stefan hints there that it can be fixed in a revised version
As the subject says, does it?
--
Kind Regards
Visitá/Go to http://www.opensuse.org
N�r��y隊Z)z{.���r�+�맲��r��z�^�ˬz����uح��ڕ���ݱ隊Z)z{.���r�+��^��)z{.�
2007/11/2, Patrick Shanahan [EMAIL PROTECTED]:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
* Gabriel . [EMAIL PROTECTED] [11-02-07 15:36]:
As the subject says, does it?
Date: Fri, 2 Nov 2007 20:20:39 +0100
From: Michael Loeffler [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject
2007/10/31, Katarina Machalkova [EMAIL PROTECTED]:
Hi,
Are there any plans to publish the fix to yast2-ntp-client as an
update to 10.3 ?
The issue should be fixed by now, however it's not up to me to decide whether
it is worth online update :) The bug does not affect functionality at all,
Are there any plans to publish the fix to yast2-ntp-client as an
update to 10.3 ?
--
Kind Regards
Visitá/Go to http://www.opensuse.org
N�r��y隊Z)z{.���r�+�맲��r��z�^�ˬz����uح��ڕ���ݱ隊Z)z{.���r�+��^��)z{.�
Cristian Rodriguez escribió:
IMHO, using the 'smart' approach would be better.
No, you end having almost the same problem.. We have explained this many
times, smart is **no** model to follow for a package manager, it is
inconsistent and it does **not work** properly in 64 bit.
I'm not
2007/10/4, Stanislav Visnovsky [EMAIL PROTECTED]:
The most important feature for download and install is that you can operate
under very restricted situations, e.g. disk and memory requirements.
I agree that on a running system, this is not the most effective approach.
What needs to be
2007/10/3, Stanislav Visnovsky [EMAIL PROTECTED]:
Dňa Wednesday 03 October 2007 00:35:50 Gabriel . ste napísal:
I configured my tv card using yast (qt version), I had to edit the
card params manually. All works fine. But after restart, the modules
are not loaded, so I have to set it up
Maybe you are already thinking on it, but I didn't read any comments about it.
This will be a little enhancement for 11.0.
On current versions, using zypper to update is a bit dangerous when a
lot of packages are involved. For instance, zypper install the new
packages removing the old one
2007/9/26, Doctor Who [EMAIL PROTECTED]:
I currently have compiz working but would like to try compiz-fusion
and associated plugins (which are installed).
How do I 'change' to using compiz-fusion from compiz?
Thanks.
Look here http://en.opensuse.org/Compiz_Fusion
2007/9/24, JP Rosevear [EMAIL PROTECTED]:
On Sat, 2007-09-22 at 19:39 -0300, Gabriel . wrote:
After upgrading to RC1 I got this message 'The panel encountered a
problem while loading OAFIID:GNOME_MixerApplet.'
Manually adding the volume control applet to the panel results in the
same
2007/9/23, James Ogley [EMAIL PROTECTED]:
Do you have gstreamer010-plugins-base installed?
Can you please provide the output of
ldd /usr/lib/control-center-2.0/gnome-settings-daemon | grep gst ?
libgstaudio-0.10.so.0 = not found
libgstbase-0.10.so.0 =
Robert Kaiser escribió:
Gabriel . wrote:
This packages are installed:
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
Apparently gstreamer010-plugins-base was not updated during the
upgrade, so I did it manually and it works now.
You realize
I managed to update from 10.2 to 10.3 RC1, now, every time I log in a
get an error that the gnome-settings-daemon cannot start.
I attached an screenshot.
By the way, I noticed that some kde packages was installed, even
though I had installed just gnome (I think there are packages from
kde3base,
2007/9/22, JP Rosevear [EMAIL PROTECTED]:
Try running /usr/lib/control-center-2.0/gnome-settings-daemon manually
and see what it spits out to the console.
This is the output
/usr/lib/control-center-2.0/gnome-settings-daemon: error while loading
shared libraries: libgstaudio-0.10.so.0: cannot
2007/9/22, Gabriel . [EMAIL PROTECTED]:
2007/9/22, JP Rosevear [EMAIL PROTECTED]:
Try running /usr/lib/control-center-2.0/gnome-settings-daemon manually
and see what it spits out to the console.
This is the output
/usr/lib/control-center-2.0/gnome-settings-daemon: error while loading
After upgrading to RC1 I got this message 'The panel encountered a
problem while loading OAFIID:GNOME_MixerApplet.'
Manually adding the volume control applet to the panel results in the
same error message.
Is anyone else seeing this ?
I wanted to test the audio, so I started banshee and got
I couldn't update an opensuse 10.2 with 10.3 RC1 because an unresolvable
dependency resolution timeout
What is this???
Is there a way to force updating anyway?
IMO, if there's a package conflict, yast can't resolve it, ok, just
leave it, who cares, it will not work anyway. Or the package
Peter Buschbacher escribió:
Gabriel . schrieb:
I don't understand the Package Selector of 10.3, I want to remove all
games, so I select 'View Packages in categories' , the categories are
showed although they are empty on Installed Software
So my question is, How can I remove a complete
Why there's no more Install Software icon on the gnome menu ? or at
least a easy way to access yast?
IMO the Application Browser is really annoying.
Regards.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands,
I don't understand the Package Selector of 10.3, I want to remove all
games, so I select 'View Packages in categories' , the categories are
showed although they are empty on Installed Software
So my question is, How can I remove a complete category or pattern ?
Best Regards.
I have to manually editing the tv card parameters, so I go to TV Card
under Yast and select Advance Configuration, but the parameter entry
box is disabled.
Should I fill a bug?
Regards.
-
To unsubscribe, e-mail: [EMAIL
Sid Boyce escribió:
Felix Miata wrote:
On 2007/08/29 04:25 (GMT+0100) Sid Boyce apparently typed:
I had a failing IDE HD as /dev/sda, so I installed 10.3 on a new SATA
drive /dev/sdb and was booting from it until I removed /dev/sda. The
SATA drive is now /dev/sda, but it won't boot, just the
I would like to have the new gnome-commander (1.2.4) release in 10.3 and
the gnome cd too.
What do you think?
Regards.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Klaus Kaempf escribió:
* Gabriel [EMAIL PROTECTED] [Jul 04. 2007 02:51]:
Klaus Kaempf escribió:
* Carlos E. R. [EMAIL PROTECTED] [Jul 03. 2007 11:32]:
There might be even another approach - updating by repository.
Why not find out what is updatable and show a list where I can choose
from
Klaus Kaempf escribió:
* Carlos E. R. [EMAIL PROTECTED] [Jul 03. 2007 11:32]:
There might be even another approach - updating by repository.
Why not find out what is updatable and show a list where I can choose
from? Ie, a selection to choose aside from security patches only / all.
The
- java-1.4.2-sun will be dropped, versions 1.5.0, 1.6.0 (DLJ licensed) and
gcj-compat 1.4.2 will be included. The DLJ-license is a special lincense
that was introduced by Sun in 2006 for re-distributors of Sun Java (see
http://download.java.net/dlj/DLJ-FAQ.html).
About 1.4, it should stay.
I don't think they can't coexist. I think the user should choose what to
install, considering both desktop environments have equivalent
applications for basic desktop usage.
KDE apps in GNOME (and viceversa), even if themed, are not well
integrated and give the impression of an inconsistent
I think this is really something I would like to see in next
openSUSE -release. This would make software installations more easier than
any other distribution has. (especially from 3rd party repos..)
I think it will be very useful.
I hope seeing it on next release.
Regards
El jue, 05-04-2007 a las 09:43 +0200, Michal Zugec escribió:
Hi Gabriel,
this is known bug (not fixed yet).
As workaround you can use IDE disk in wmvare.
M.
Thanks, I'll try first with failsafe to see what happen. Then I'll
follow your advice.
Regards
I wanted to test 10.3 alpha 2, so I installed it on a virtual machine (vmware).
The install was successful, but after restart, it shows:
...
resume device /dev/sda1 not found (ignoring)
waiting for device /dev/sda2 to appear: not found -- exiting
to /bin/sh
sh: not job control in this shell
40 matches
Mail list logo
