Currently package/Makefile only passes /lib /usr/lib and /usr/lib/ebtables
to mklibs. However, other libs can also reside in different subdirectories
(in my case /usr/lib/ipsec). Hence, create the list of library directories
dynamically.
Signed-off-by: Helmut Schaa helmut.sc...@googlemail.com
---
i have managed to boot the system further, but seems like the switch
detection is causing the problems.
i tried your netconfig patch but i'm getting the same scenario as with
Fiach's patch. when applied it i have only recompiled the firmware, please
tell me if it is neccessary to compile the
On Tue, Jun 25, 2013 at 5:19 AM, Flávio Silveira f...@terra.com.br wrote:
Thanks for your responses, but a few questions still remains.
1- I should keep partitions u-boot, u-boot env and devdata from stock
firmware, correct?
Yes.
2- What the second parameter in reg means? Like 0x1 on
On Tue, 2013-06-25 at 00:20 -0400, jonsm...@gmail.com wrote:
Can this be made to work on Ralink? When I have the adhoc0 interface
up bringing up ap0 says interface busy.
Ralink is not good for supporting this type of setup. I had tried AP and
client mode, and after some hacking it sort-of
It is odd, I agree, this is confusing, but look at full serial log (the link
I just sent) and you will see the same thing!
Maybe it has some protection to 3rd party firmware?!
- Original Message -
From: jonsm...@gmail.com
To: OpenWrt Development List openwrt-devel@lists.openwrt.org
On Tue, Jun 25, 2013 at 8:25 AM, Conor O'Gorman i...@conorogorman.net wrote:
On Tue, 2013-06-25 at 00:20 -0400, jonsm...@gmail.com wrote:
Can this be made to work on Ralink? When I have the adhoc0 interface
up bringing up ap0 says interface busy.
Ralink is not good for supporting this
On 06/25/2013 11:09 AM, jonsm...@gmail.com wrote:
On Tue, Jun 25, 2013 at 8:25 AM, Conor O'Gorman i...@conorogorman.net wrote:
On Tue, 2013-06-25 at 00:20 -0400, jonsm...@gmail.com wrote:
Can this be made to work on Ralink? When I have the adhoc0 interface
up bringing up ap0 says interface
Checked the entropy in an ARV4518pw (Lantiq Danube) running Attitude Adjustment
and the available
entropy was, more or less, between 300-400.
Found this link (http://vafer.org/blog/20071219173915/), so plugged a pendrive
and thanks to the
dwg-otg generated interrupts the entropy_avail
So how do you want batman-adv and allow normal clients to attach?
Maybe I should give 11S a try.
I loaded OpenWRT onto my AR9331 hardware It doesn't support mixing
adhoc (IBSS) and AP mode either.
valid interface combinations:
* #{ managed, WDS, P2P-client } = 2048, #{ AP, mesh point, P2P-GO }