Hauke Mehrtens [2018-11-24 14:06:45]:
Hi,
> >UBOOT_PATH := $$(STAGING_DIR_IMAGE)/$$(UBOOT)-u-boot.img
> >UBOOT_SPL_PATH := $$(STAGING_DIR_IMAGE)/$$(UBOOT)-SPL
> >ARTIFACTS := spl-uboot.bin
> >ARTIFACT/spl-uboot.bin := append-uboot-spl | pad-to 68k | append-uboot
>
> Where do you
On Mon, Nov 26, 2018 at 1:19 PM Russell Senior
wrote:
>
> On Mon, Nov 26, 2018 at 5:16 AM Mathias Kresin wrote:
> >
> > Hey Russell,
> >
> > thanks for your patch. Find my remarks inline.
> >
> > Mathias
> >
> > [...]
> >
> > Wouldn't be the power led the more appropriate led for boot status
> >
Indoor low-power router with 2.4 GHz radio
CPU:Atheros AR7241 rev 1
RAM:32 MB
Flash: 8 MB NOR SPI
Switch: Atheros AR7240
Ports: 1x WAN, 4x LAN 10/100 Ethernet
WLAN: Atheros AR9285 (2.4 GHz)
USB:1x USB2 host port
Note: Ethernet WAN/LAN port naming is reversed from ar71xx.
WAN is
Move common LED configuration into a separate includible dtsi.
Signed-off-by: Russell Senior
---
.../linux/ath79/dts/ar7241_ubnt_bullet-m.dts | 2 +-
target/linux/ath79/dts/ar7241_ubnt_nano-m.dts | 2 +-
.../linux/ath79/dts/ar7241_ubnt_rocket-m.dts | 2 +-
W dniu 26.11.2018 o 22:47, Lucian Cristian pisze:
> On 26.11.2018 23:11, Tomasz Maciej Nowak wrote:
>> W dniu 26.11.2018 o 21:44, Lucian Cristian pisze:
>>> On 20.11.2018 18:20, Tomasz Maciej Nowak wrote:
This small series addresses current problem with late loading of Intel
microcode in
On 26.11.2018 23:11, Tomasz Maciej Nowak wrote:
W dniu 26.11.2018 o 21:44, Lucian Cristian pisze:
On 20.11.2018 18:20, Tomasz Maciej Nowak wrote:
This small series addresses current problem with late loading of Intel
microcode in OpenWrt. Following the commit messages [1] and later
discussion,
On Mon, Nov 26, 2018 at 5:16 AM Mathias Kresin wrote:
>
> Hey Russell,
>
> thanks for your patch. Find my remarks inline.
>
> Mathias
>
> 26/11/2018 13:54, Russell Senior:
> >
> > Indoor low-power router with 2.4 GHz radio
> >
> > CPU:Atheros AR7241 rev 1
> > RAM:32 MB
> > Flash: 8 MB
W dniu 26.11.2018 o 21:44, Lucian Cristian pisze:
> On 20.11.2018 18:20, Tomasz Maciej Nowak wrote:
>> This small series addresses current problem with late loading of Intel
>> microcode in OpenWrt. Following the commit messages [1] and later
>> discussion, late loading off the microcode can be
Signed-off-by: Russell Senior
---
target/linux/ramips/base-files/etc/board.d/02_network | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
b/target/linux/ramips/base-files/etc/board.d/02_network
index
On 20.11.2018 18:20, Tomasz Maciej Nowak wrote:
This small series addresses current problem with late loading of Intel
microcode in OpenWrt. Following the commit messages [1] and later
discussion, late loading off the microcode can be ineffective for some
processors [2] and for others disabled
This commit adds firmware partition compatible for the
TP-Link Archer C58 v1 and Archer C59 v1.
Since a22311e this allows to select the correct mtdsplit
parser instead of trying all available ones one by one.
Signed-off-by: David Bauer
---
This commit adds firmware partition compatible for the
OCEDO Raccoon and OCEDO Koala.
Since a22311e this allows to select the correct mtdsplit
parser instead of trying all available ones one by one.
Signed-off-by: David Bauer
---
target/linux/ath79/dts/ar9344_ocedo_raccoon.dts | 1 +
From: Freddy Leitner
This remedies an issue with the MBL Duo if both disks are inserted
and contain OpenWrt. kernel and dtb would be loaded from SATA 1:1
while rootfs (/dev/sda2) would be mounted on SATA 0:1.
Such a mix would obviously only work if both OpenWrt versions/
builds are identical,
On 26/11/2018 15:44, Günther Kelleter wrote:
Multicast ARL entries can have multiple destination ports. Get and dump
all destination ports of each entry, not just the lowest.
Signed-off-by: Günther Kelleter
merged, Thanks !
---
Changes in v2:
- code readability
- commit message
Multicast ARL entries can have multiple destination ports. Get and dump
all destination ports of each entry, not just the lowest.
Signed-off-by: Günther Kelleter
---
Changes in v2:
- code readability
- commit message
.../generic/files/drivers/net/phy/ar8216.c | 18 --
Hey Russell,
thanks for your patch. Find my remarks inline.
Mathias
26/11/2018 13:54, Russell Senior:
Indoor low-power router with 2.4 GHz radio
CPU:Atheros AR7241 rev 1
RAM:32 MB
Flash: 8 MB NOR SPI
Switch: Atheros AR7240
Ports: 1x WAN, 4x LAN 10/100 Ethernet
WLAN: Atheros
Indoor low-power router with 2.4 GHz radio
CPU:Atheros AR7241 rev 1
RAM:32 MB
Flash: 8 MB NOR SPI
Switch: Atheros AR7240
Ports: 1x WAN, 4x LAN 10/100 Ethernet
WLAN: Atheros AR9285 (2.4 GHz)
USB:1x USB2 host port
Note: Ethernet WAN/LAN port naming is reversed from ar71xx.
WAN is
On Sun, 25 Nov 2018 at 12:39, Russell Senior wrote:
> Specifically, SKW92A_E16, described here:
>
>
> http://www.skylabmodule.com/wp-content/uploads/SkyLab_SKW92A_V1.04_datasheet.pdf
>
> Specification:
> - MediaTek MT7628N/N (580 Mhz)
> - 64 MB of RAM
> - 16 MB of FLASH
> - 2T2R 2.4 GHz
> - 5x
On Sun, 25 Nov 2018 at 16:43, Karl-Felix Glatzer wrote:
> On 2018-11-24 10:30:59, Rafał Miłecki wrote:
> > On Fri, 23 Nov 2018 at 22:03, Karl-Felix Glatzer
> > wrote:
> > > This patch adds support for TP-Link Archer A7
> > >
> > > Specification:
> > > - SOC: QCA9563
> > > - Flash: 16 MiB (SPI)
On 15/10/2018 21:32, Christian Lamparter wrote:
From: Freddy Leitner
This remedies an issue with the MBL Duo if both disks are inserted
and contain OpenWrt. kernel and dtb would be loaded from SATA 1:1
while rootfs (/dev/sda2) would be mounted on SATA 0:1.
Such a mix would obviously only
On 17/10/2018 01:08, Rosen Penev wrote:
This breaks compatibility with kernel 3.18, but as that is more or less
abandoned at this point, it should be fine.
it'll break the buildbots. please make it safe to use even for 3.18 as
we still have that kernel in the tree
On 19/10/2018 13:17, Ram Chandra Jangir wrote:
We have IPQ8064 AP161 board which has three GMAC's
* RGMII x2
* SGMII x1.
The existing ar8327 driver does not have support for
three GMAC's connection, hence this change adds support
for the same. This has been verified on AP148 and AP161
Hi,
looks good, nitpicks inline
On 23/11/2018 22:00, Karl-Felix Glatzer wrote:
This patch adds support for TP-Link Archer A7
Specification:
- SOC: QCA9563
- Flash: 16 MiB (SPI)
- RAM: 128 MiB (DDR2)
- Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
- 2.4GHz (bgn) SoC internal
-
Hi Russel,
please resend as a new new thread, patchwork failed to properly pick this up
https://patchwork.ozlabs.org/patch/998802/
John
On 16/11/2018 14:05, Russell Senior wrote:
Indoor low-power router with 2.4 GHz radio
CPU:Atheros AR7241 rev 1
RAM:32 MB
Flash: 8 MB NOR SPI
looks correct but few nitpicks inline
On 22/11/2018 15:46, Günther Kelleter wrote:
Multicast ARL entries can have multiple destination ports.
this statement is correct but does not describe what the patch does :-)
Signed-off-by: Günther Kelleter
---
25 matches
Mail list logo
