]: Set new
config for phy phy0
So it definitely looks like a problem with wpa_supplicant.
root@OpenWrt:~# wpa_supplicant -v
wpa_supplicant v2.11-devel
Again, any suggestions appreciated.
-Bill
On Fri, Jun 21, 2024 at 8:42 AM Bill Moffitt wrote:
>
> Trying to set up meshing on Comfast EW
Trying to set up meshing on Comfast EW-72 v2 - my first time working
with the Mediatek chipset. I have played around with meshing quite a
bit on Atheros chips.
The interesting problem is that it seems to work in v23.05.2 and
v23.05.3 with wpad-basic-mbedtls, but, when I swap it out for
wpad-mesh
? CF-E110N is supported since
> 19.07...), then upgrade one major release at a time (first 21.02, then
> 22.03, until 23.05). When does this issue appear, if it does?
>
> Best,
>
> Roger
>
> El 23/10/23 a les 23:54, Bill Moffitt ha escrit:
> > I have been using an older
I have been using an older version of OpenWRT on my E110Ns; I loaded up
the latest release to see if it would fix some "LOST BEACON" problems.
Unfortunately, it didn't even boot (went into a bootloop), so I broke
out the serial cable,
busted open the radio, and connected it. Here's what I
I have been using an older version of OpenWRT on my E110N; I loaded up
the latest release to see if it would fix some "LOST BEACON" problems.
Unfortunately, it didn't even boot, so I broke out the serial cable,
busted open the radio, and connected it. Here's what I captured:
U-Boot
...@ayrstone.com.
As a side note, I tried selling them on ebay using "running OpenWRT,
not Ubiquiti's firmware" as a differentiation point. I did not even
get a bid, even setting the starting price at $20.
On Fri, Apr 28, 2023 at 2:19 PM Bill Moffitt wrote:
>
> I have three (3) ol
what might be causing
this? (e.g. misconfiguration of some sort)
--
Bill Moffitt
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
iquiti-loco-m2-xw/5760/5> or
reply to this email to respond.
In Reply To
[bmoffitt] bmoffitt <http://forum.lede-project.org/users/bmoffitt>
Bill Moffitt <http://forum.lede-project.org/users/bmoffitt>
I have been busy with other things, but I finally got a shipment of
brand-new PicoStations (XM, identical to Bullet) here and tried to flash
both the trunk builds of OpenWRT and LEDE on them.
I'm getting the same error I did some months back:
sent DATA
ve any new ones at the moment, and probably won't for a
few weeks. And I don't recall what the new ones I was testing came with.
--
Ticket URL: <https://dev.openwrt.org/ticket/20982#comment:32>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
--
Bill Moffitt
Ayrstone Produ
I wasn't able to download the trunk nightlies. It looks like there's a
nice, slick, new web interface, but no builds in some areas
(particularly the AR7xx generic platform). Is it just a failed build or
a problem in the webpage?
--
Bill Moffitt
I got a new batch of LocoM2 units, and they won't flash using the
"recovery" (tftp) method - it says,
received ERROR
I just downloaded CC for the Rocket M2
(openwrt-15.05-ar71xx-generic-ubnt-rocket-m-squashfs-factory.bin) and
could not get it to work.
Specifically, the lights worked, but I could not obtain any response
(ping, ssh - I even tried telnet) at 192.168.1.1 from the Ethernet port.
I saw Ben
My understanding is that UBNT has an ASIC in their devices to help with
the timing of the TDMA mode. My suspicion is that, without that ASIC,
software only TDMA would probably not be precise enough to bring benefit.
Does anyone have a better understanding of this?
-Bill
Message: 1
Date: Tue, 07 Oct 2014 12:35:25 +0200
From: Felix Fietkau n...@openwrt.org
To: mailinglist openwrt-devel@lists.openwrt.org
Subject: Re: [OpenWrt-Devel] Q: mac80211: defailt distance-settings 0
Message-ID: 5433c1ed.5050...@openwrt.org
Content-Type: text/plain; charset=windows-1252
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
--
Bill Moffitt
Ayrstone Productivity
http://ayrstone.com
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt
, for the moment, I would argue that the rightness of following
expected behavior is greater than the rightness of delivering the true
end-to-end nature of v6.
FWIW,
-Bill Moffitt
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https
On March 26, 2014 11:29:59 AM PDT, Sergey Ryazanov ryazanov@gmail.com
wrote:
2014-03-26 9:13 GMT+04:00 Bill Moffitt bmoff...@ayrstone.com:
It's clear that SOMETHING is getting time-limited, but I have
distance=0 and
dissassoc_low_ack=0 on both the AP and the station, and I'm not sure
what
to look for more information
at this point.
All help gratefully accepted...
--
Bill Moffitt
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
in ensuring OpenWRT plays well on V6 in anticipation
of this event, should it come to pass. It may be a nice opportunity for
OpenWRT to get some nice publicity by saving the day when the crisis
occurs.
/Philosophical rant
--
Bill Moffitt
___
openwrt-devel
of is to runtime-patch
the in-memory copy of the radio-data in the board setup code.
~ Jow
Here's how I did it is this; first, I put the following script in /etc/
and called it regdoman-script.sh:
*Code:*
#!/bin/sh
# By Bill Moffitt - this script puts a zero in the 632nd byte
reply. I agree the best short-term workaround
is to do a runtime patch of the regdomain, but how, practically, to do it?
I'm very open to suggestions - I'm currently dead in the water.
-Bill
--
Bill Moffitt
Ayrstone Productivity
http://www.ayrstone.com
products in OpenWRT.
If you're qualified and interested (or know someone who might be),
please contact me at bmoff...@ayrstone.com.
Thanks,
Bill
--
Bill Moffitt
Ayrstone Productivity
http://www.ayrstone.com
___
openwrt-devel mailing list
openwrt-devel
(and dmesg) says,
wifi%d ath_attach failed: -22
I don't know enough about MadWifi and the HAL to even debug this.
Any help will be appreciated!
--
Bill Moffitt
Ayrstone Productivity
http://www.ayrstone.com
___
openwrt-devel mailing list
openwrt-devel
Confirming that the patch seems to work - ports correct, all lights work
correctly.
--
Bill Moffitt
Ayrstone Productivity
http://www.ayrstone.com
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman
25 matches
Mail list logo
