Hello Jeonghum,
Can you share some details on the boards and modems you are using?
Regards,
Bruno
On Mon, 27 Apr 2020 at 13:42, Bjørn Mork wrote:
>
> Jeonghum Joh writes:
>
> > I am porting a 5G/LTE modem into OpenWRT.
>
> Follow the instructions for LTE modems. A 5G modem is pretty much the
>
On 21 February 2017 at 13:42, Tom Psyborg wrote:
> have you tried this one
> https://forum.lede-project.org/t/new-qca988x-firmware-with-mesh-support/1587
From my testing it does not work.
>
> On 21 February 2017 at 14:19, Valo, Kalle wrote:
>>
>> voncken writes:
>>
>> > Do you know if the firm
this fix?
>>
>> Regards.
>>
>> Cedric Voncken.
>>>
>>> -Message d'origine-
>>> De : linux-wireless-ow...@vger.kernel.org [mailto:linux-wireless-
>>> ow...@vger.kernel.org] De la part de Ben Greear
>>> Envoyé
On 15 November 2016 at 13:43, Valo, Kalle wrote:
> Bruno Antunes writes:
>
>> On 7 November 2016 at 18:06, Valo, Kalle wrote:
>>> Bruno Antunes writes:
>>>
>>>> On 4 November 2016 at 21:17, Valo, Kalle wrote:
>>>>
>>>>>
On 7 November 2016 at 18:06, Valo, Kalle wrote:
> Bruno Antunes writes:
>
>> On 4 November 2016 at 21:17, Valo, Kalle wrote:
>>> Bruno Antunes writes:
>>>
>>>> Old thread but I think the issue is still present.
>>>>
>>>> I&#x
On 7 November 2016 at 14:06, Ben Greear wrote:
> On 11/07/2016 03:54 AM, Bruno Antunes wrote:
>>
>> On 4 November 2016 at 22:23, Ben Greear wrote:
>>>
>>> The bug appears that vlan-tx-stripping is unconditionally enabled in
>>> at least my firmware. I
On 4 November 2016 at 21:17, Valo, Kalle wrote:
> Bruno Antunes writes:
>
>> Old thread but I think the issue is still present.
>>
>> I'm running a setup with VLANs with WDS and ath10k cards.
>>
>> To make it work both cards must be loaded in raw
On 4 November 2016 at 22:23, Ben Greear wrote:
> The bug appears that vlan-tx-stripping is unconditionally enabled in
> at least my firmware. I have re-compiled w/out that flag set, and it
> appears
> to work for me.
>
> Please download this firmware, rename it firmware-2.bin, make sure you
> rem
On 4 November 2016 at 14:18, Mauro Mozzarelli wrote:
> Since the capability is implemented in software you might be testing the
> limit of your router's CPU i/o speed.
By loading the module in rawmode?
The AP is an APU and Sta is an APU2.
>
>
>
> On 04/11/16 14:
Hi all,
Old thread but I think the issue is still present.
I'm running a setup with VLANs with WDS and ath10k cards.
To make it work both cards must be loaded in rawmode, AP
and Sta, and with no security.
I'm using a OpenWrt trunk r49941 and the most recent firmware,
10.2.4.70.58, from Kalle at
Hello,
On 23 March 2016 at 10:53, Xue Liu wrote:
> Hello everyone,
>
> Now I am doing point to point throughput test using and ath10k. The
> hardwares are clearfog A1 board with armada 388 and WLE900VX (QCA9880). The
> OpenWRT trunk is running on it.
Could you tell what is the OpenWrt Release
Same here...
I'm trying to implement ht-mcs without luck.
Bruno
On 18 November 2014 11:19, Rafał Miłecki wrote:
> Could someone explain netifd and wireless management a bit, please? I
> tried to read some code, but so far it looks messy to me.
> Maybe if we had some short description of netifd
Using OpenWrt trunk r42000 on 2 different boards (gw2388-4 & router station
pro) causes kernel oops when restarting the network or wifi.
The setting that causes the oops is connecting in adhoc mode to a
batman-adv mesh network.
As comparison WDS mode works fine for the same boards.
Also Adhoc mo
Hi,
I recently have been testing some 802.11ac hardware with the ath10k.
Could someone confirm if WDS and adhoc mode currently don't have support with
this driver?
Thanks,
Bruno
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https:/
14 matches
Mail list logo
